speed limit 5 for sale, brand-new and used.

The Spartan II is a versatile high performance, industrial grade SCR DC motor speed control in a compact ventilated enclosure.

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP This product is new without packaging or documentation, the documentation is available from the manufacturers web site. This unit was purchased for a for a project that was never started, it has been powered on, tested and reset to factory defaults. Specs are from manufacturers web site: Main

Product Description Variable DC Speed Control, Output Voltage 90/180 VDC, Power Rating @ Lower Voltage 1/50 to 1/2, @ Higher Voltage 1/25 to 1 HP, Input Voltage 120/240 VAC 60/50 Hz, Speed Range 100:1, Field Programmable Front Panel, Microprocessor Based with Nonvolatile Memory, Digital Closed Loop Accuracy with Pulse Generator +/- 1/

Variable Fan Speed Controller -For Hydroponics Inline Fan Exhaust Air Or Electric Router FREE SHIPPING ALL USA Three settings include off, on (full) and variable. Simple use the dial to increase or decrease fan motor speed. 120 volt/15 amps.

Sevcon MillipaK 4Q 24-48V 300A Motor Controller 633T43810 The Millipak 4Q controller operates in full 4-quadrant mode allowing contactor-free operation in direction changing and regenerative braking. It operates in either torque or closed loop speed control mode. The Millipak 4Q permits adjustable regenerative braking without the use of addit

KBIC-240DS Variable Speed DC Motor Controls for Shunt Wound, PM and AC/DC Motors - used, but tested. Clean With SI-5 barrier terminal board signal isolator and .05 ohm horsepower resistor 0-90 VDC output 1/100 – 11?2 Hp @ 115 VAC – 50/60 Hzs 1/50 – 3 Hp @ 230 VAC – 50/60 Hz

New KB Electronics DC Motor Control, KBPC-240D, 9338. Here is a link to the drive manual for specifications: http://www.kbelectronics.com/manuals/kbpc_240d_manual.pdf The KBPC-240D is a 115/230vac, enclosed NEMA-4X (IP-65), adjustable speed DC Motor Speed & variable Torque control, rated 15 Amps RMS @ 45C. It is designed for environments where high humidity or watertight integrity is required.

var itemNumber = window.ebayItemID ?

Notice: Dear friends,in order to improve the speed and efficiency of the work and better services for buyers, please specify the declared value in invoice, to avoid unnecessary troubl

INCLUDING

IC200UDR010 28 Point Micro PLC, (16) 24VDC In, (1) 24VDC Out, (11) Relay Out, 24VDC PS IC200UDR228 28 Point Micro PLC, (16) 24 VC In, (1) 24VDC Out, (11) Relay Out, 12/24 VDC PS VersaMax Micro PLCs IC200UDR010 and IC200UDR228 accept sixteen DC inputs and provide one DC output and eleven normally-open 2 Amp relay outputs. The only differences between these modules are their power supplies and the output current rating of their Q1 DC output.

Motenergy ME1004 PMDC Motor, 24-48V, 10.75 hp cont, 21 hp pk This is a Permanent Magnet, Brush Type, DC Motor with Neodymium Iron Boron Magnets. The 1" shaft is similar to the shaft on most Lawn and Garden Tractor engines. This motor is perfect for an engine replacement on a Lawn and Garden tractor when converting the

Motenergy ME1003 PMDC Motor, 12-72V, 15.4 hp cont, 30.8 hp pk The ME1003 is a brush-type, permanent magnet DC motor with very high efficiency. Capable of 11.5 KW continuous and 23 KW for 1 minute. For voltages from 12 to 72 VDC input and 200 amps continuous (400 amps for 1 minute).

1/2hp 1750 RPM 56C Frame 90 Volt DC Electric Motor with Control Product Description Adjustable Speed Motor, Motor Type Permanent Magnet DC, 1/2 HP, Enclosure Totally Enclosed Fan-Cooled, Nameplate RPM 1750, Input Voltage 115VAC, 56C Frame, Mounting C-face with Removable Rigid Base, 1.0 Service Factor, 5.0 Full Load Amps, Insulation Class F, CW/CCW Rotation, Output Voltage 90VDC, Thermal Protection None, Ambient Temperature 40 Degrees C, Ball Bearings, Shaft Dia.

Motenergy ME0909 PMDC Motor, 12-48V, 4 hp cont, 12.8 hp pk The Motenergy ME0909 is a Brush-Type, Permanent Magnet DC motor with very high efficiency. Capable of 4.8 KW continuous and 15 KW for 30 seconds. For voltages from 12 to 48 VDC input and 100 amps continuous (300 amps for 30 seconds).

welcome to smartbuyersstore