For sale is a 60 watt 12 volt silicone pad fuel line heater with 3M adhesive on the back side. This can be secured along fuel lines using Kapton high temperature tape. It gets up to and holds 160 degrees Celsius or 320 degrees Fahrenheit .
the 12 inch piece will be CUT from the pictured roll PTFE Coated Fiberglass Fabric With Silicone Adhesive Tape12" x 13mm widePTFE is the generic term for Teflon i used this to replace the strip under the heating wire on a heat seal unitit was slightly wider than i needed but it doesnt matter as long as it stays put
This is a 5-pack of unused self-adhesive type T thermocouples. you could buy it new from Omega for $63.00 or get this one from me for a lot less. Better than 0.3s response time!
Poxy Coat is a one component protective coating consisting of epoxy ester and silicone alkyd resins allowing for maximum adhesion and hardness. No baking or mixing of two parts. Poxy Coat produces an armor-hard, flexible, waterproof coating.
Counter Pastry Mat, Long 30-7/8''/ 23'' wide. This unique mat is composed of fiberglass and is coated on both sides with non stick silicone, allowing for the dough to be rolled ou
For sale is a 200 watt 120 volt silicone fuel filter heater with spring and hook attachments. These prevent fuel from gelling inside the filter on cold days. These can be used for waste vegetable oil , biodiesel or diesel fuel.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.