plastic threaded rod for sale, brand-new and used.

AC100+ Gold® Vinylester Injection Adhesive Anchoring System The AC100+ Gold is a two-component adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The AC100+ Gold is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete base materials.

Anchoring elements: HIS-N internally-threaded inserts, HIT-V threaded rods, HIT-Z torque-controlled bonded anchors, Rebar Base material condition: Dry, Wet

Simpson 1/2" x 6" screen tubes for hollow masonry anchoring of rebar and threaded rod. Case of 100pcs for $100. Two cases available.

ULTRABOND 1 / 10 GALLON KIT Ultrabond 1 Epoxy Anchoring Gel is a two component (1:1 ratio), 100% solids, high modulus, structural epoxy gel. It is a solvent free, no odor, high strength, moisture insensitive, non-sag epoxy system.

HS-200 Epoxy Anchoring Gel is a two component (2:1 ratio), 100% solids, high modulus, structural epoxy gel. It is a solvent free, no odor, high strength, moisture insensitive, non-sag epoxy system. HS-200 has a long working time (20 minutes at 75° F), while providing an anchor that can be loaded in as little as 4 hours.

Base materials Concrete (cracked), Concrete (uncracked) Base material condition Dry, Wet

Brand new never opened.For Concrete and Masonry with Threaded Rod and Rebar This auction is for one 22 fl oz tube as pictured. Shipping to U.S. only, fast shipping!

AC100+ Gold® Vinylester Injection Adhesive Anchoring System The AC100+ Gold is a two-component adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The AC100+ Gold is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete base materials.

Milwaukee Magnetic Tape Measures are nothing but Heavy Duty. Using Nylon Blade Protection and a 5-Point Reinforced Frame, they offer up to 10X Longer Blade Life, by resisting contamination wear and increasing protection when dropped. To increase productivity on the jobsite, Milwaukee Magnetic Tapes feature a new-to-world Dual Magnets, which securely attaches to EMT sticks from below and steel studs in front.

Milwaukee Magnetic Tape Measures are Nothing But Heavy Duty. Using Nylon Blade Protection and a 5-Point Reinforced Frame, they offer up to 10X Longer Blade Life, by resisting contamination wear and increasing protection when dropped. To increase productivity on the jobsite, Milwaukee Magnetic Tapes feature a new-to-world Dual Magnets, which securely attaches to EMT sticks from below and steel studs in front.

The Action is for G33000-11 This 5/8 x 11 adapter will marry two female-threaded ends and will lengthen 2 poles mated together. Material: Al. Made of aluminum,silver anodieed.

NEW Roller for Standard Prism Rod Collecting Field Data - GPS / RTK / Total Station Replaces Prism Rod Tip to roll over smooth surfaces effortlessly. Adjust Prism HT and GO. Requires bolt as the assembly is not threaded.

UP FOR SALE IS A CRAIN UNIVERSAL TOP MOUNT FOR A CRAIN OR CST GRADE ROD. THESE MOUNT ON TOP OF YOUR ROD BY SCREWING INTO THE THREADED INSERT ON TOP OF THE ROD. THE RECEIVER WILL CLAMP ON TO THIS MOUNT.

Model CMR-50 Number of Sections: 11 Collapsed Length: 66-7/8" The CMR-50Ft / 15.24M Model 90182 is a great tool for fast accurate one-person measuring, the CMR Series is the tool for measuring heights, clearances and horizontal distances. The CMR Measuring Ruler is a direct reading rod at eye level. It is made of rugged, non-conductive fiberglass (NOTE: This product has not been electrically tested as a live line tool).

The carbon fiber and aluminum co The carbon fiber and aluminum construction makes these poles up to 30% lighter than similar poles. This pole is designed to be compatible with all targets, prisms, and GPS antennas. It's perfect for use with robotic total station.

The carbon fiber and aluminum co The carbon fiber and aluminum construction makes these robotic poles up to 30% lighter than similar poles. Highly visible exterior graduations are great for staking out "cut/fill" stakes or simply use them as a scale for offsets. It's perfect for use with GPS or robotic total station.

KOMORI ORIGINAL INK KEY MOTOR PART NUMBER: FIN-4071-013 CONDITION: NEW PLEASE CALL 1-800-991-0400 EXT O FOR MORE DETAILS

FLEX PC PART: NJ1L-RS4 COUNTRY OF ORIGIN: JAPAN CONDITION: NEW IN BOX PLEASE NOTE: OTHER MODELS AVAILABLE CALL US 1-800-991-0400 FOR MORE INFO