keo tools for sale, brand-new and used.

This is a USED Starrett No.278 1"(25mm) capacity V-Block set. Each block is 1-1/4" square and 1-5/8" long. These are precision ground to extreme accuracy.

This is a USED Albrecht 1/8" to 5/8" 6 Jacobs taper Classic Keyless Drill chuck made in Germany! The chuck turns smoothly like new and the jaws show no sign of wear. Currently these chucks are selling new for $420.00.

This is a USED Albrecht 0-3/8" model number 100-J33 Classic Keyless drill chuck. Included is a 5/8" straight shank arbor. The scroll moves very smooth, almost like new!, & the jaws close down very tight.

This is a USED 3-1/2" Boring Head with a R8 integral shank. This head will hold 3/4" shank boring bars. There are no marking on the head so we cannot identify the brand name.

This is a USED Heavy-Duty 4" Cam Action Drill Press Vise. It shows signs of wear, but slides like new! The jaws are 4" wide, it has a 4-1/4" opening, & the jaw depth is 1-3/8".

This is a USED Hermann Schmidt precision grinding vise in the original wooden case! There is a small mark that you can see in the pictures. New this vise is $825.00.

These "ARE NOT" your normal lifting straps! They were made for the military in a army green and are labeled "Projectile Lifting Straps". The laminated instructions show them lifting loads of military shells!

This is a USED George Scherr Company 10-Piece Rectangular steel gage block set in the case that also includes a 1" round check block. The round block must have been misplaced over time and replaced with the Brown & Sharpe equivalent that is now in the set. The rectangular blocks included are 2", 1", .500", .300", .250", .200", .125", .100", and .0625".

This is a USED 1-5/8"x6"x6"x8" Precision Steel Angle Plate with a wood storage box. There are 121 3/8"-16 tapped holes on the face, and the holes on the sides are tapped 1/4"-20. This is a very, very unique angle plate with all these holes and the plate is hardened!

This is a pair of stepped groove V-blocks that includes the 2 blocks, 1 clamp, and 2 step blocks for the V. The dimensions measure 2-1/2" long, 2-3/4" wide, and 2" high. The are also 5/16-18 tapped holes on the ends and the bottom of each block.

This is a slightly USED 3/4" Shank Fly Cutter set. It includes 3 cutter that are 2-1/2", 2", 1-1/2", and the wooden stand. The 1-1/2" is the only cutter in the set that has been used, and the wear can be seen in the pictures.

This is a full box of 2000 Marson Aluminum Pop Rivets, Marsons part number AB8-4A. The diameter of the body is 1/8", the grip range is .062"-.250", the head diameter is .500", the head height is .080", and it is a button-head style rivet. Sales Tax will be charged for shipments within OHIO unless Buyer has established account with T&S Tool & Supply or has a tax exempt form on file with us.

This is a BRAND NEW set of 3 flat-end chuck jaws for a Suga 8" chuck. The serrations are 1.5mm x 60?. They are made of steel and the dimensions are as follows: G: .551" E: 10mm D: 1.181" J: 1.970" C: 1.500" B: 3.750" A: 4.000"

This is a set of 4 T-slot Table Face Plate Jaws, USA made by Skinner Chuck Company of Connecticut. Here are some of the specifications on the individual jaws;5" Jaw Length1-3/8" Jaw Width 2-3/8" Serrated Jaw Face Height 5-1/8" Total Height on each assembly to top of Jaw1-1/4" Bottom T-Slot Width7-7/8" appro. center hole distance13/16" hole diameter9-5/8" overall len