Ritchie Yellow Jacket 60331 Tubing Bender Kit, Used: This ratcheting tubing bender kit comes with 5 different size bending shoes: 3/8”; 1/2”; 5/8”; 3/4" and 7/8”. Normally this kit comes with a 1/4" shoe, but it is missing from the set. This set is designed to bend soft copper and soft aluminum.
This is a brand new Krowne Beverage center Model# KR18-W60D-10. It has so much I recommend you do a search of model # and look at them on line. This is one nice set up.
You are looking at a manual, hand operated tubing bender wood block good for aluminum and copper up to 7/8", used in great condition, the wood block is made out of solid oak hardwood, aluminum tubing illustrated in picture not included, block has three bolts and butterfly nuts to mount on a table or work bench,
The Eldex Column Heater improves the reproducibility of retention times in chromatography by providing a stable, temperature controlled environment, controlling temperatures from 5°C above ambient to 150°C. Insures Reproducible Analyses The Eldex column heater will accommodate up to four standard 30cm columns up to 3/8 inch O.D., plus guard columns. A variety of column sizes can be used in the same heater, as the aluminum inserts are interchangeable.
This is a complete Flaring tool made by Ridgid. I'm also including a set of swaging tools that were not included when I purchased this item, they are also made by ridgid. They include 1/4, 3/8, 1/2, and 5/8.
Ridgid 32573 118 Close Quarters Quick-Feed Cutter with Ratchet Handle New 2 In 1, Close Quarters Tube Cutter, Can Be Used Alone Or With The Ratchet Handle, Light & Ergonomic Accessory, Easy To Use In Hard To Reach Areas Because The Knob Only Needs To Be Tightened Once, Handle Works In Tights Spaces That Are Too Small To Rotate The Cutter By Hand, Adjustable To Any Size From 1/4" ???
CT-300AL Hydraulic Expander Flaring Tool Hydraulic Flare Tube Expanding Tool Kit Six Easy steps: 1.Deburr inside of tube. 2.Anneal the tube if necessary(for hard or thickwall tube). 3.Screw the expander head on expander.
CT-100AL/ML Lever Tube Expanding Tool Copper Pipe Expander Kit Six Easy Steps: Deburr inside of tube. To create perfectly expanded tubing for soldering or brazing, you must use soft copper or fully anneal end of tube to be expanded. Pull expander handle up to 90-degree position.
CT-364-10 Lever Type Copper Pipe Bending Tool Tube Bender For 5/8” Each tool bends one size. For bending soft copper, brass, aluminum, steel, stainless steel and other very thinner metals. Calibrated marking with red color to show angle of bend.
CT-364-08 Lever Type Copper Pipe Bending Tool Tube Bender Each tool bends one size. For bending soft copper, brass, aluminum, steel, stainless steel and other very thinner metals. Calibrated marking with red color to show angle of bend.
90 Degree 3-in-1 Pipe Bending Tool Tube Bender CT-368A-90 Aluminum alloy body. Open size-slips on tubing at any point, can bend 0.4mm thin tube without distortion. Calibrated markings for making accurate left-hand, right-hand, and offset bends 90 degree start requires less effort.
180 Degree 3-in-1 Copper Pipe Bending Tool Tubing Bender WK-N368-A-180 Aluminum alloy body. Open size-slips on tubing at any point, can bend 0.4mm thin tube without distortion. Calibrated markings for making accurate left-hand, right-hand, and offset bends 180 degree start requires less effort.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
