5 belt pulley for sale, brand-new and used.

Here is an original belt pulley that fits a 2-1/2hp to 12hp Hercules, Economy, or Jeager. There are NO cracks, breaks, or welds. Check out the pictures and see if you need it.

2010UD6G.13.40 New Sanyo Denki, Ball Bearing, 2 Phase, 42MM Sq. (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for a Factory Tray of (20) Motors.

For sale is a new unknown manufacturer 64 tooth Timing Pulley with a part number P6414M55F that is 11 5/8" in Diameter, 2 3/4" Thick with a 4 1/4" Diameter Bore. It weighs 55 lbs.

The super quiet Enduro™ Pro SM600-1 Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors. With the high and rising cost of electricity, you just can't afford to run a clutch motor any longer. The power and dependability of the brushless Enduro™ Pro SM600-1 is adequate for light duty sewing.

If you have Singer class 7,Consew 733 or comparable Seiko machine and you want servo motor,this will be your only choice.This is the 1400 Watts /1.87HP servo motor.All other brands comparable motors do not have a strange for this type machines. This motor pays for itself with the energy it saves! The super quiet Enduro™ Elite SM1050-2PF Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors.

Enduro Pro SM645-2P Energy saving, dependable and efficient Servo Motor for commercial sewing machines. These high torque motors result in better handling and increased production! 220 Volts 800 WATTS with Positioner Description: The super quiet Enduro™ Pro SM645-2P Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors.

This motor pays for itself with the energy it saves! The super quiet Enduro™ Elite SM1000-2 Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors. With the high and rising cost of electricity, you just can't afford to run a clutch motor any longer.

This is a rather hard to find original cast iron pulley for a Fuller and Johnson hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.

This is a rather hard to find original cast iron pulley for a hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.

This is a real nice original cast iron pulley for a York hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It measures 12 inches in diameter with a 5 inch face.

This is a rather hard to find original drive pulley for a Pickering or other make of governor. These governors were commonly used on steam engines and some larger gas engines and tractors. It is in excellent used condition with no cracks, breaks, or repairs of any kind.

Here is an original belt pulley that fits a 2-1/2hp IHC Famous or Titan Horizontal hopper cooled engine or a 3hp Vertical IHC Famous or Titan. There are NO cracks, breaks, or welds. Check out the pictures and see if you need it.

TS550 motor produces almost no noise, saves energy (60-80%) and is brushless, speed djustable and durable. It provides a high starting torque even at low speed or from a complete stop. By using a modern technologically advanced microprocessor,Hall sensor and Pulse-Width Modulation technology,the motor can be set to rotate at different maximum speeds, in either normal or reverse directions, and can start with different accelerating speeds.

Variable speed pulley, spring loaded, metric. 19mm Bore with 8mm keyway. Pulley OD 120mm (4.7") Will fit 16mm, (5/8") wide belt.

Office: 830-775-2580 - Customer Service drw02@kingsurplus.com - Shipping quotes: aking@kingsurplus.com Our Asset #:KSCU / 110 / 5 Qty available:1 V-Belt Pulley Bushing 3

All around the world people want to know how a single unit, like PulleyMan, can have all the functions of a winch, lift, and a hoist? How PulleyMan can run along a fixed

V-Belt Pulley, Quick Detachable Bushed Bore, Bore Dia. Bushing Required, SD Bushing Required, Outside Dia. 5.4 In., 4 Groove, Solid Construction, C or CX Belt Pitch Dia.