1/4 threaded rod for sale, brand-new and used.

5/8-11" Threaded Rod Hanger For Metal Deck, Roof & Floors ( Cast In Place ) Box Of 50 Cooper B-line Bang-It anchors 5/8-11" RED Part# ACPD-62, Comparable to Simpson's BBMD6275, Powers' 7546 Bang-It concrete inserts are designed for installation in and through metal composite deck used to support newly poured concrete floors or roof slabs. After installation, the protective sleeve of the insert protrudes below the surface of the deck

Hang ceiling wire & jack chain, threaded rod and eye lag screws. Our hardware is designed for the most efficient, secure and cost effective solution. High quality all steel construction Threaded and non-threaded holes to accommodate jack chain, ceiling wire or threaded rod APPLICATION Vertical Overhangs Hammer-on Threaded Rod Powder Actuated Eye Lag Screws Threaded Rod Pressed Beam Clamps

ebay template YOU ARE BUYING ONE PHD 16020-2-0001 ROD ESCAPEMENT 3/4" BORE & STROKE. ROD END OPTION: FLATS AND THREADED HOLES 4 SIDES AND ENDS, CAP OPTION: STANDARD CAP. THE PHD SERIES 160 DOUBLE ROD ESCAPEMENT PROVIDES A SIMPLE, RELIABLE MEANS TO ISOLATE AND RELEASE PARTS FROM VARIOUS TYPES OF FEEDING MECHANISMS.

ebay template YOU ARE BUYING ONE NEW PHD 13610-1-0102 ROD ESCAPEMENT 3/4" BORE & STROKE. ROD END OPTION: FLATS AND THREADED HOLES 4 SIDES AND ENDS, CAP OPTION: CAP WITH FLOW CONTROLS AND STROKE ADJUSTMENT. THE PHD SERIES 160 DOUBLE ROD ESCAPEMENT PROVIDES A SIMPLE, RELIABLE MEANS TO ISOLATE AND RELEASE PARTS FROM VARIOUS TYPES OF FEEDING MECHANISMS.

Caddy 6TA24 H-Ti/T Rod to Flange Clip - 237 Pcs Features Suspends threaded rod from beam flanges Threaded rod hanger can swivel to provide a vertical dropdown Requires only a hammer to install Retails $121.40 per 100

Easily locate fish rod end in dark spaces. The Illuminated Fish Rod tip from Klein Tools lights up for maximum visibility. You'll enjoy long life from the bright white, Omni-directional L

These Hangermate anchors are used to suspend a 1/4" threaded rod vertically into a wood structure. The machine screw end accepts a 1/4" - 20 threaded rod. The other end screws into wood, and does not require a pilot hole.

This is for a Large 316 Stainless Steel 1-3/4"-5 Threaded Rod x 19" Long with Nuts & Washers. The rod is threaded about 4-1/2" on each end with a flat washer and a nut on them. I have More stuff Similar to this so Don't for get to check out my eBay Store For More Unbelievable Great Deals!!!

40 Pk Steel Zinc Plated 1/4" 20 TPI Hexagonal Threaded Rod Coupler Nut N182667 Coupler

20 Pk Steel Zinc Plated 1/4" 20 TPI Hexagonal Threaded Rod Coupler Nut N182667 Coupler

I have approximately 150 EA of brand new, never used plastic tie rod, end caps or threaded bar nut caps. They are intended to attach on to an end of a threaded bar and seal/fill with grease so the metal bar will not corrode. These caps have removable plugs so that cert fittings can be added if necessary.

18-8 Stainless Steel Fully Threaded Rod, #10-32 Thread Size, 36" Length, Right Hand Threads Product Features

Simpson Strong Tie DIA50 Simpson Strong-Tie Carbon Steel Drop-In Anchor 1/2-inch Rod 2-inch body 50 per Box Product Features

Simpson Strong Tie DIA37 Simpson Strong-Tie Carbon Steel Drop-In Anchor 3/8-inch Rod 1-1/2-inch body 50 per Box Product Features

55 TON 6" STROKE SPX POWER TEAM C556C SA HYDRAULIC CYLINDER 9-8004-55-6 SINGLE ACTING 55 TON 6" STROKE HYDRAULIC CYLINDER Brand new,

Simpson Strong Tie THD50934RC 1/2-Inch by 9-3/4-Inch Titen HD Rod Coupler for Concrete/Masonry, 20 per Pack Brand new, opened box Product Description The Titen HD Rod Coupler is designed to be used in conjunction with a single or multi-story tie-down system. This anchor