1.420 for sale, brand-new and used.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

Wire EDM Large Part Fixture All parts are made with 420 stainless steel and hardened to 45-55 RC (unless specified) precision ground +/-.0002" flat/parallel. 1- Fixture 2- Sloted clamp 5mm SHCS(stainless) for mounting clamps, and a stop 5mm set screws(stainless) for holding part Hieght is 2 inch, width is 2 inch, lenght is 6 inch part step is 1.25 inch X 1.25 inch (size may vary) The two screw counter bores are for 8mm x1.25 screws and they are 50mm apart.

Check out my other items! Company: EDM Basics (located in Rochester New York) &

Wire EDM Small Part Fixture Cost: $200 All parts are made with 420 stainless steel and hardened to 45-55 RC (unless specified) precision ground +/-.0002" flat/parallel. 1- Fixture 1- Sloted clamp 1- side clamp 4- 5mm SHCS(stainless) for mounting clamps, and a stop 3- 5mm SHCH(stainless) for holding part Hieght is 1 inch, width is 1.25 inch, lenght is 6 inch part step is .5 inch X .8 inch (size may vary) The two screw counter bores are for 8mm x1.25 screws and they are 50mm apart.

Wire EDM V-Block 1.5 X 5 X 5 (inch) Will hold up to a 3 inch diameter. 420 stainless steel (hardened 48-52RC) With - clamp - set up rail - stainless socket head cap screws - side rail (for standing block up or on its side) - (3) clamp screws The slotted screws are for M8 and M6 socket head caps screws they are machined 50 mm apart so these will work in any Wire EDM machine. Main Block is precision ground +/- .0002" flat/parallel

Bought the Taig around 2000 from Nick Carter Co. Check his site to verify my prices. Purchased to make minature engines but never got away from the real ones.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

Gold International Machinery Corporation GOLDMACHINERY.COM | DGOLD@GOLDMACHINERY.COM

Made in the UK by Renishaw. This is a CNC Machining Center Inspection Probe w/ BT40 Shank. Model #: MP9 Serial #: F08094 SPECIFICATIONS: Primary application: Work piece set-up and inspection for CNC machining centres Operating Range (Min/Max): 10mm / 3m REPEATABILITY Max 2 sigma (2?) valueRepeatability of 1.0 µm (40 µin) is valid for test velocityof 480 mm/min (1.57 ft/min) at stylus tip, using stylus50 mm (1.97 in) long.

Brand new 12pc micro checking set For checking various spindle positions of entire micrometer range Meet or exceeds U.S. Federal specification GGG-G-15C and ISO 9000 requirements Gauge blocks include: .105, .210, .315, .420, .500, .605, .710, .815, .920 & 1.000" Optical flats for checking micrometer flatness are .500 & .5125" Manufacturer's calibration certificate included

***Used CNC Parts*** Specializing in selling quali