YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
UP FOR BIDS ONE CLUTCH PULLEY FOR A FAIRBANKS MORSE THROTTLE GOVERNED 3 HP Z ENGINE. No cracks/welds/braze that I can see. Very nice unmolested Fairbanks Morse Clutch Pulley for your 3 HP Z Engine.
Model Gas Engine Clutch Fully Functional!! Modeled after a Stickney clutch, can be engaged while the engine is running, the engine must be stopped to disengaged. Will accept a 5/8" diameter shaft with a 3/16" keyway, with a socket head set screw over the keyway for easy installation.
Here is a used pressed paper 5" in diameter and 5 3/4" surface pulley. The center hole is 1 1/8". It has 2 holes in the surface that looked to be drilled.
Here is a nice 5" diameter clutch pulley. I have never seen another clutch exactly like and as small as it is. I think it is in great shape and ready to use.
Here is an original clutch pulley that fits a 2-1/2hp to 12hp Hercules, Economy, or Jeager. It needs a little cleaning and such but it will make a nice pulley. The handle is loose, it spins and moves in and out but the pulley is stuck.
Here is a factory original clutch pulley for a 3hp Fairbanks Morse Z engine. This pulley bolts to the flywheel but has to slip over a crankshaft to work properly . The hole for the crankshaft is about 1-13/16" which should be standard for a 3hp FM Z.
Here is an original belt pulley that fits a 2-1/2hp to 12hp Hercules, Economy, or Jeager. There are NO cracks, breaks, or welds. Check out the pictures and see if you need it.
Here is an original belt pulley that fits a 2-1/2hp IHC Famous or Titan Horizontal hopper cooled engine or a 3hp Vertical IHC Famous or Titan. There are NO cracks, breaks, or welds. Check out the pictures and see if you need it.
New U.S, General 13 PC Bosch Type Alternator Pulley Kit This professional 13 piece Bosch type alternator pulley kit is used to replace free wheel pulleys on Bosch and Magnet Marelli type alternators. Interchangeable components work with Audi, BMW, Fiat, Mercedes, Renault, VW Stored in a plastic moulded storage case to keep all the components in one place.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.