Zhla Conduit, Liquid Tight, 1/2 In, 6 Ft Liquatite

US $170

  • Costa Mesa, California, United States
  • Jun 11th
Up for consideration is ZHLA Conduit, Liquid Tight, 1/2 In, 6 Ft length. They appear to be unused, laying on top of each other on pallets, so there may be rubs/scuffs on outside. This listing is for 1, 6' length, larger quantities available. Check out my other listings, 10' sections also available. "TYPE - ZHLA Non-halogen, low smoke and low flame spread make Type ZHLA a proven choice for applications where limiting toxic materials of combustion are an important issue. Since ZHLA is also UL listed, it is ideal for field installation in confined, public areas such as subways, tunnels, etc. CONSTRUCTION: ZHLA has a flexible inner core made from a spiral wound strip of heavy-gauge, hot-dipped galvanized steel. The 3/8 through 1-1/4 inch trade sizes contain an integral bonding strip. The 1-1/2 inch and larger are designed with a fully interlocked strip. The specially formulated thermoplastic black polyurethane jacket has excellent flame resistance and low smoke & toxicity generation characteristics. It is also resistant to Ozone, Hydrocarbons, Moderate Chemicals, Oils and Fuels. APPLICATION: There are many situations and areas where PVC is not allowed for electrical construction. The jacketing material used for ZHLA virtually eliminates the release of acidic gases found in PVC products.    -Meets the requirements of Bombardier SMP 800-C for Toxic Gas Generation.   -Meets the requirements of both ASTM E162 for Flame Spread and ASTM E662 for Smoke Generation. This conduit is intended for installation in accordance Article 350 of the NEC (ANSI/NFPA-70):   -Permitted for use in exposed or concealed locations.   -Installations under raised floors in Data Processing Areas. Article 645.5(E)(2).   -Listed and marked for direct burial and in poured concrete.   -For containment of 1000 volts and lower potential circuits.    -Sunlight-resistant.    -Suitable as a grounding conductor when used for circuits rated up to 20A for the 3/8 & 1/2 inch trade sizes and 60A for the 3/4 through 1-1/4 inch trade sizes in lengths six feet or less per Article 250.118(6). Larger sizes require separate grounding conductor.    -Installations in hazardous (classified) locations:      Class I Div. 2: Article 501.10(B)(2) & 501.30(B)      Class II Div. 1: Article 502.10(A)(2) & 502.30(B) Div 2: 502.10(B)(2)      Class III Div. 1: Article 503.10(A)(2) & 503.30(B) Div 2: 503.10(A)(2)    -Elevators and Hoistways Article 620.21.   Meets the same specifications as Type LA. Listed File # E29278. Conforms to Underwriters Laboratories Standard ANSI/UL-360 for Liquidtight Flexible Steel Conduit. CSA Certified to C22.2 No.56 File# LL18858 This conduit is intended for use according to the Canadian Electrical Code as described in clause 12-1300 for dry, damp or wet locations and in hazardous areas where flexibility is necessary per 18-202(4)(b) and 18-302(4) for both Class II and Class III locations. FT1"

Directions

Similar products from Tubing & Conduit

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies