+ Post new Ad
WHITNEY TOOL 96099 9' Tap Extensions - OUTSIDE DIAMETER : 1/4', US $24 – Picture 0
WHITNEY TOOL 96099 9' Tap Extensions - OUTSIDE DIAMETER : 1/4', US $24 – Picture 0

Whitney Tool 96099 9' Tap Extensions - Outside Diameter : 1/4'

US $24

  • Duncan, South Carolina, United States
  • May 31st
Open on mobile:
QR code
Benefits Compression cap for easy tightening. No wrench required. Very effective tool at low cost. Applications The slim profile lets you fit into places not accessible to conventional tap extensions. Features Made from tool steel. Internal square drive for positive tap drive. Integral compression collet eliminates the need for bulky collet nuts. Product Specifications Product Specifications Brand WHITNEY TOOL Tap Size Range #0-#6 Outside Diameter 1/4" Drive End Outside Diameter .194" Drive End Square Size .152" Tap Driving End Inside Diameter 7/8" Tap Driving End Outside Diameter .141" Tap Driving End Square Size .152" Square Diameter .152" Body Diameter 1/4" Depth 7/8" Overall Length 9" Tap Shank Diameter .141" Tap Size #0-#6 Tool Material Tool Steel Weight 0.1 lbs. Country of Origin UNITED STATES OF AMERICA Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution for Online Merchants

Directions

Similar products from Other Threading Taps

WALTON EDP40075 8' Tap Extension - Outside Diameter : 7/8'

WALTON EDP40075 8' Tap Extension - Outside Diameter : 7/8'

  • Duncan, South Carolina, United States
  • May 31st
WALTON 12873 Tap Extra Fingers - Number of Flutes: 3-Flute Size : 7/8'

WALTON 12873 Tap Extra Fingers - Number of Flutes: 3-Flute Size : 7/8'

  • Duncan, South Carolina, United States
  • May 31st
WALTON EDP40006 8' Tap Extension - Outside Diameter : 5/16'

WALTON EDP40006 8' Tap Extension - Outside Diameter : 5/16'

  • Duncan, South Carolina, United States
  • May 31st
WALTON EDP40087 8' Tap Extension - Outside Diameter : 1-1/16'

WALTON EDP40087 8' Tap Extension - Outside Diameter : 1-1/16'

  • Duncan, South Carolina, United States
  • May 31st
WALTON EDP40100 8' Tap Extension - Outside Diameter : 1-1/16'

WALTON EDP40100 8' Tap Extension - Outside Diameter : 1-1/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96090 5' Tap Extensions - OUTSIDE DIAMETER : 5/16'

WHITNEY TOOL 96090 5' Tap Extensions - OUTSIDE DIAMETER : 5/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96091 5' Tap Extensions - OUTSIDE DIAMETER : 3/8'

WHITNEY TOOL 96091 5' Tap Extensions - OUTSIDE DIAMETER : 3/8'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96096 5' Tap Extensions - OUTSIDE DIAMETER : 1/2'

WHITNEY TOOL 96096 5' Tap Extensions - OUTSIDE DIAMETER : 1/2'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96097 5' Tap Extensions - OUTSIDE DIAMETER : 9/16'

WHITNEY TOOL 96097 5' Tap Extensions - OUTSIDE DIAMETER : 9/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96098 5' Tap Extensions - OUTSIDE DIAMETER : 1/2'

WHITNEY TOOL 96098 5' Tap Extensions - OUTSIDE DIAMETER : 1/2'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96100 9' Tap Extensions - OUTSIDE DIAMETER : 5/16'

WHITNEY TOOL 96100 9' Tap Extensions - OUTSIDE DIAMETER : 5/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96103 9' Tap Extensions - OUTSIDE DIAMETER : 7/16'

WHITNEY TOOL 96103 9' Tap Extensions - OUTSIDE DIAMETER : 7/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96104 9' Tap Extensions - OUTSIDE DIAMETER : 1/2'

WHITNEY TOOL 96104 9' Tap Extensions - OUTSIDE DIAMETER : 1/2'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96107 9' Tap Extensions - OUTSIDE DIAMETER : 9/16'

WHITNEY TOOL 96107 9' Tap Extensions - OUTSIDE DIAMETER : 9/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96105 9' Tap Extensions - OUTSIDE DIAMETER : 9/16'

WHITNEY TOOL 96105 9' Tap Extensions - OUTSIDE DIAMETER : 9/16'

  • Duncan, South Carolina, United States
  • May 31st
LOT (10) CLEVELAND 1/4-20 TAPER H3 HAND TAP NOS

LOT (10) CLEVELAND 1/4-20 TAPER H3 HAND TAP NOS

  • UNITED STATES, United States
  • May 31st
M5-M12 REVERSIBLE TAPPING HEAD, R8 SHANK-M16 & 2 COLLETS (3900-0256)

M5-M12 REVERSIBLE TAPPING HEAD, R8 SHANK-M16 & 2 COLLETS (3900-0256)

  • Chino, California, United States
  • May 31st
OSG EXOTAP 7/8-9 3/4-10 1-8 3Pcs

OSG EXOTAP 7/8-9 3/4-10 1-8 3Pcs

  • Porter, Texas, United States
  • May 31st
NATC HSS 4-flute Straight Thru Tap GH-7 7/8 - 9 NC Flute

NATC HSS 4-flute Straight Thru Tap GH-7 7/8 - 9 NC Flute

  • Maineville, Ohio, United States
  • May 31st
ACE 5/16" HAND TAP TAPPING HANDLE 9-1/4" OVERALL LENGTH

ACE 5/16" HAND TAP TAPPING HANDLE 9-1/4" OVERALL LENGTH

  • Chino, California, United States
  • May 31st

People who viewed this item also vieved

Hand Tap Warrior England 5/8x10 NS Special Size G.H.1 HSS GRD

Hand Tap Warrior England 5/8x10 NS Special Size G.H.1 HSS GRD

  • Sacramento, California, United States
  • Jan 30th
"WIDELL" 2-1/4"3 ACME Threading Tap 4 Flute Tanden

"WIDELL" 2-1/4"3 ACME Threading Tap 4 Flute Tanden

  • Coventry, Rhode Island, United States
  • Jan 30th
Lot 1pcs Metric HSS(M2) Plug Taps M27 M27x2.0mm Right Hand Machine Tap Cheaper

Lot 1pcs Metric HSS(M2) Plug Taps M27 M27x2.0mm Right Hand Machine Tap Cheaper

  • JN,SD, China
  • Jan 30th
M27 x 2.0 Metric Plug/ Bottoming Tap

M27 x 2.0 Metric Plug/ Bottoming Tap

  • Rutland, Massachusetts, United States
  • Jan 30th
M18 X 1.0 18mm X 1.0 D5 HS METRIC HAND TAP BOTTOM 311-4392 ENCO EN601D03CO NEW

M18 X 1.0 18mm X 1.0 D5 HS METRIC HAND TAP BOTTOM 311-4392 ENCO EN601D03CO NEW

  • Cerritos, California, United States
  • Jan 30th
NEW MEDA ROUND DIE STOCK HANDLE (For 1" round dies) 2320010 INDIA

NEW MEDA ROUND DIE STOCK HANDLE (For 1" round dies) 2320010 INDIA

  • Fairfield, Iowa, United States
  • Jan 30th
TAP & DIE 60 PC SET ALLOY STEEL BOTH SAE & METRIC THREAD SIZES W/CASE HUGE KIT

TAP & DIE 60 PC SET ALLOY STEEL BOTH SAE & METRIC THREAD SIZES W/CASE HUGE KIT

  • Tampa, Florida, United States
  • Jan 30th
NEW 60 PIECE ALLOY STEEL SAE & METRIC TAP & DIE SET WITH CASE

NEW 60 PIECE ALLOY STEEL SAE & METRIC TAP & DIE SET WITH CASE

  • Worcester, Massachusetts, United States
  • Jan 30th
Vintage Snap-on Metric Spark Plug Tap Set #TDM-13A 6pcs in box

Vintage Snap-on Metric Spark Plug Tap Set #TDM-13A 6pcs in box

  • Burnaby, BC, Canada
  • Jan 30th
NAPA (New Britain) metric TAP made in the USA M11-1.50

NAPA (New Britain) metric TAP made in the USA M11-1.50

  • Sammamish, Washington, United States
  • Jan 30th
Pipe Taps 3/4-14 5FL HSS NPTF 3-1/4" OAL Qty 3 <1588>

Pipe Taps 3/4-14 5FL HSS NPTF 3-1/4" OAL Qty 3 <1588>

  • Saint Louis, Missouri, United States
  • Jan 30th
NORTH AMERICAN Tap M20x2.5 HSS 4FL D6 4-1/2&#034; OAL 211645 USA &lt;1610&gt;

NORTH AMERICAN Tap M20x2.5 HSS 4FL D6 4-1/2" OAL 211645 USA <1610>

  • Saint Louis, Missouri, United States
  • Jan 30th
Pipe Taps 3/4-14 5FL HSS NPTF 3-1/4&#034; OAL Qty 2 &lt;1588&gt;

Pipe Taps 3/4-14 5FL HSS NPTF 3-1/4" OAL Qty 2 <1588>

  • Saint Louis, Missouri, United States
  • Jan 30th
Pipe Taps 1/2-14 4FL HSS NPSM 3-1/8&#034; OAL Qty 3 &lt;1590&gt;

Pipe Taps 1/2-14 4FL HSS NPSM 3-1/8" OAL Qty 3 <1590>

  • Saint Louis, Missouri, United States
  • Jan 30th
Greenfield 16240 7-flute 1-1/2&#034; Pipe Tap 1-1/2&#034;-11 HS 0Z G E3 USA made

Greenfield 16240 7-flute 1-1/2" Pipe Tap 1-1/2"-11 HS 0Z G E3 USA made

  • Saint Louis, Missouri, United States
  • Jan 30th
5 pcs OSG HY-PRO 10mm Metric 10 MM H6 Plug 3 Flutes Spiral Point Taps 2591701

5 pcs OSG HY-PRO 10mm Metric 10 MM H6 Plug 3 Flutes Spiral Point Taps 2591701

  • Champlain, New York, United States
  • Jan 30th
5 new OSG 5/16&#034; - 18 UNC general purpose spiral point PLUG TAPS HSS 7015300

5 new OSG 5/16" - 18 UNC general purpose spiral point PLUG TAPS HSS 7015300

  • Champlain, New York, United States
  • Jan 30th
5 pcs UB UNION BUTTERFIELD 6-32 NC APPLIX Taps H2P Spiral Point 2 Flutes 1710933

5 pcs UB UNION BUTTERFIELD 6-32 NC APPLIX Taps H2P Spiral Point 2 Flutes 1710933

  • Champlain, New York, United States
  • Jan 30th
1 OSG 5/8-18 H5 4FL UNF Modified Bottoming Spiral Flute point Tap oxide 1705101

1 OSG 5/8-18 H5 4FL UNF Modified Bottoming Spiral Flute point Tap oxide 1705101

  • Champlain, New York, United States
  • Jan 30th
new OSG EXO 5/8-18 UNF GH3 4FX Modified Bottoming Spiral Flute Tap oxide 1753701

new OSG EXO 5/8-18 UNF GH3 4FX Modified Bottoming Spiral Flute Tap oxide 1753701

  • Champlain, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies