+ Post new Ad
WHITNEY TOOL 96090 5' Tap Extensions - OUTSIDE DIAMETER : 5/16', US $35 – Picture 0
WHITNEY TOOL 96090 5' Tap Extensions - OUTSIDE DIAMETER : 5/16', US $35 – Picture 0

Whitney Tool 96090 5' Tap Extensions - Outside Diameter : 5/16'

US $35

  • Duncan, South Carolina, United States
  • May 31st
Open on mobile:
QR code
Benefits Compression cap for easy tightening. No wrench required. Very effective tool at low cost. Applications The slim profile lets you fit into places not accessible to conventional tap extensions. Features Made from tool steel. Internal square drive for positive tap drive. Integral compression collet eliminates the need for bulky collet nuts. Product Specifications Product Specifications Brand WHITNEY TOOL Tap Size Range #8 Outside Diameter 5/16" Drive End Outside Diameter .194" Drive End Square Size .152" Tap Driving End Inside Diameter 7/8" Tap Driving End Outside Diameter .168" Tap Driving End Square Size .152" Square Diameter .152" Body Diameter 5/16" Depth 7/8" Overall Length 5" Tap Shank Diameter .168" Tap Size 8 Tool Material Tool Steel Weight 0.05 lbs. Country of Origin UNITED STATES OF AMERICA Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution for Online Merchants

Directions

Similar products from Other Threading Taps

3 -1 1/8th AND 1-1" 8NC HS PLUG TAPS READ FORMS, MEDCO, WIDELL, R&N

3 -1 1/8th AND 1-1" 8NC HS PLUG TAPS READ FORMS, MEDCO, WIDELL, R&N

  • Salina, Kansas, United States
  • Jun 1st
MACHINIST NEW NAPA T-440 TAP MADE IN USA 1/8" x 27 NPT HSS PIPE TAP

MACHINIST NEW NAPA T-440 TAP MADE IN USA 1/8" x 27 NPT HSS PIPE TAP

  • USA, United States
  • Jun 1st
5 Pcs Tap Wrench/Chucks Millers Falls and others

5 Pcs Tap Wrench/Chucks Millers Falls and others

  • Edison, New Jersey, United States
  • Jun 1st
WALTON 18015 Tap Extractors Sets, Size: Assorted

WALTON 18015 Tap Extractors Sets, Size: Assorted

  • Duncan, South Carolina, United States
  • May 31st
WALTON EDP40056 8' Tap Extension - Outside Diameter : 11/16'

WALTON EDP40056 8' Tap Extension - Outside Diameter : 11/16'

  • Duncan, South Carolina, United States
  • May 31st
WALTON EDP40075 8' Tap Extension - Outside Diameter : 7/8'

WALTON EDP40075 8' Tap Extension - Outside Diameter : 7/8'

  • Duncan, South Carolina, United States
  • May 31st
WALTON 12873 Tap Extra Fingers - Number of Flutes: 3-Flute Size : 7/8'

WALTON 12873 Tap Extra Fingers - Number of Flutes: 3-Flute Size : 7/8'

  • Duncan, South Carolina, United States
  • May 31st
WALTON EDP40006 8' Tap Extension - Outside Diameter : 5/16'

WALTON EDP40006 8' Tap Extension - Outside Diameter : 5/16'

  • Duncan, South Carolina, United States
  • May 31st
WALTON EDP40087 8' Tap Extension - Outside Diameter : 1-1/16'

WALTON EDP40087 8' Tap Extension - Outside Diameter : 1-1/16'

  • Duncan, South Carolina, United States
  • May 31st
WALTON EDP40100 8' Tap Extension - Outside Diameter : 1-1/16'

WALTON EDP40100 8' Tap Extension - Outside Diameter : 1-1/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96091 5' Tap Extensions - OUTSIDE DIAMETER : 3/8'

WHITNEY TOOL 96091 5' Tap Extensions - OUTSIDE DIAMETER : 3/8'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96096 5' Tap Extensions - OUTSIDE DIAMETER : 1/2'

WHITNEY TOOL 96096 5' Tap Extensions - OUTSIDE DIAMETER : 1/2'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96097 5' Tap Extensions - OUTSIDE DIAMETER : 9/16'

WHITNEY TOOL 96097 5' Tap Extensions - OUTSIDE DIAMETER : 9/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96098 5' Tap Extensions - OUTSIDE DIAMETER : 1/2'

WHITNEY TOOL 96098 5' Tap Extensions - OUTSIDE DIAMETER : 1/2'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96099 9' Tap Extensions - OUTSIDE DIAMETER : 1/4'

WHITNEY TOOL 96099 9' Tap Extensions - OUTSIDE DIAMETER : 1/4'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96100 9' Tap Extensions - OUTSIDE DIAMETER : 5/16'

WHITNEY TOOL 96100 9' Tap Extensions - OUTSIDE DIAMETER : 5/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96103 9' Tap Extensions - OUTSIDE DIAMETER : 7/16'

WHITNEY TOOL 96103 9' Tap Extensions - OUTSIDE DIAMETER : 7/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96104 9' Tap Extensions - OUTSIDE DIAMETER : 1/2'

WHITNEY TOOL 96104 9' Tap Extensions - OUTSIDE DIAMETER : 1/2'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96107 9' Tap Extensions - OUTSIDE DIAMETER : 9/16'

WHITNEY TOOL 96107 9' Tap Extensions - OUTSIDE DIAMETER : 9/16'

  • Duncan, South Carolina, United States
  • May 31st
WHITNEY TOOL 96105 9' Tap Extensions - OUTSIDE DIAMETER : 9/16'

WHITNEY TOOL 96105 9' Tap Extensions - OUTSIDE DIAMETER : 9/16'

  • Duncan, South Carolina, United States
  • May 31st

People who viewed this item also vieved

20690, 5/8"-11, 4 Flute, HSS, BPT Hand Tap Set

20690, 5/8"-11, 4 Flute, HSS, BPT Hand Tap Set

  • Chillicothe, Missouri, United States
  • Jan 30th
Greenfield Tool & Die, 28639, 1 1/2"-8N, 4 Flute, Bottoming Hand Tap

Greenfield Tool & Die, 28639, 1 1/2"-8N, 4 Flute, Bottoming Hand Tap

  • Chillicothe, Missouri, United States
  • Jan 30th
VINTAGE NAREX W-1 TAP AND DIE TOOL KIT/SET (33 pieces) MADE IN CZECHOSLOVAKIA

VINTAGE NAREX W-1 TAP AND DIE TOOL KIT/SET (33 pieces) MADE IN CZECHOSLOVAKIA

  • Newburgh, New York, United States
  • Jan 30th
Hand Tap Warrior England 5/8x10 NS Special Size G.H.1 HSS GRD

Hand Tap Warrior England 5/8x10 NS Special Size G.H.1 HSS GRD

  • Sacramento, California, United States
  • Jan 30th
"WIDELL" 2-1/4"3 ACME Threading Tap 4 Flute Tanden

"WIDELL" 2-1/4"3 ACME Threading Tap 4 Flute Tanden

  • Coventry, Rhode Island, United States
  • Jan 30th
5/8 11 NC 3 THREAD RING GAGE NO GO ONLY .625 P.D. = .5618 SHOP INSPECTION TOOL

5/8 11 NC 3 THREAD RING GAGE NO GO ONLY .625 P.D. = .5618 SHOP INSPECTION TOOL

  • Xenia, Ohio, United States
  • Jan 30th
10-pc Mixed Taps by Besly ~ 3/8 -16 ~ 3/8 -24 ~ 15/16-18 ~ 1/4 -20 ~ 10-32 ~ 8-32 ~ 6-32

10-pc Mixed Taps by Besly ~ 3/8 -16 ~ 3/8 -24 ~ 15/16-18 ~ 1/4 -20 ~ 10-32 ~ 8-32 ~ 6-32

  • Wood River, Illinois, United States
  • Jan 30th
NEW MEDA ROUND DIE STOCK HANDLE (For 1" round dies) 2320010 INDIA

NEW MEDA ROUND DIE STOCK HANDLE (For 1" round dies) 2320010 INDIA

  • Fairfield, Iowa, United States
  • Jan 30th
TAP & DIE 60 PC SET ALLOY STEEL BOTH SAE & METRIC THREAD SIZES W/CASE HUGE KIT

TAP & DIE 60 PC SET ALLOY STEEL BOTH SAE & METRIC THREAD SIZES W/CASE HUGE KIT

  • Tampa, Florida, United States
  • Jan 30th
NEW 60 PIECE ALLOY STEEL SAE & METRIC TAP & DIE SET WITH CASE

NEW 60 PIECE ALLOY STEEL SAE & METRIC TAP & DIE SET WITH CASE

  • Worcester, Massachusetts, United States
  • Jan 30th
USED PARLEC / INGERSOLL NUMERTAP 770 1-1/8" & 1-1/16" HAND TAP COLLET 7716-1062C

USED PARLEC / INGERSOLL NUMERTAP 770 1-1/8" & 1-1/16" HAND TAP COLLET 7716-1062C

  • Fairfield, Iowa, United States
  • Jan 30th
New Berkley Pipe Dies Set 1/2" NPT H.S.S Bt-00003

New Berkley Pipe Dies Set 1/2" NPT H.S.S Bt-00003

  • Parkersburg, West Virginia, United States
  • Jan 30th
Pipe Taps 3/4-14 5FL HSS NPTF 3-1/4" OAL Qty 3 <1588>

Pipe Taps 3/4-14 5FL HSS NPTF 3-1/4" OAL Qty 3 <1588>

  • Saint Louis, Missouri, United States
  • Jan 30th
NORTH AMERICAN Tap M20x2.5 HSS 4FL D6 4-1/2&#034; OAL 211645 USA &lt;1610&gt;

NORTH AMERICAN Tap M20x2.5 HSS 4FL D6 4-1/2" OAL 211645 USA <1610>

  • Saint Louis, Missouri, United States
  • Jan 30th
Pipe Taps 3/4-14 5FL HSS NPTF 3-1/4&#034; OAL Qty 2 &lt;1588&gt;

Pipe Taps 3/4-14 5FL HSS NPTF 3-1/4" OAL Qty 2 <1588>

  • Saint Louis, Missouri, United States
  • Jan 30th
EMUGE CORP #5-40 NC Course 2B Spiral Point Tap Black Oxide number 5-40

EMUGE CORP #5-40 NC Course 2B Spiral Point Tap Black Oxide number 5-40

  • Champlain, New York, United States
  • Jan 30th
DORMER # 2-56 NC E026 Blue GH2 Gun Tap 2 Flutes EM-SS Surface Treated

DORMER # 2-56 NC E026 Blue GH2 Gun Tap 2 Flutes EM-SS Surface Treated

  • Champlain, New York, United States
  • Jan 30th
5 pcs OSG HY-PRO 10mm Metric 10 MM H6 Plug 3 Flutes Spiral Point Taps 2591701

5 pcs OSG HY-PRO 10mm Metric 10 MM H6 Plug 3 Flutes Spiral Point Taps 2591701

  • Champlain, New York, United States
  • Jan 30th
5 new OSG 5/16&#034; - 18 UNC general purpose spiral point PLUG TAPS HSS 7015300

5 new OSG 5/16" - 18 UNC general purpose spiral point PLUG TAPS HSS 7015300

  • Champlain, New York, United States
  • Jan 30th
5 pcs UB UNION BUTTERFIELD 6-32 NC APPLIX Taps H2P Spiral Point 2 Flutes 1710933

5 pcs UB UNION BUTTERFIELD 6-32 NC APPLIX Taps H2P Spiral Point 2 Flutes 1710933

  • Champlain, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies