+ Post new Ad
White Oak wood veneer 5" x 12" on paper backer "A" grade quality 1/40th" thick, US $120 – Picture 0
White Oak wood veneer 5" x 12" on paper backer "A" grade quality 1/40th" thick, US $120 – Picture 0

White Oak Wood Veneer 5" X 12" On Paper Backer "a" Grade Quality 1/40th" Thick

US $120

  • Louisville, Kentucky, United States
  • Jun 3rd
Open on mobile:
QR code
White Oak wood veneer 5" x 12" (or larger) with paper backer. "A" grade 1/40th" thickness). ONE piece per price. The various pictures are there to provide a range of color and grain appearance. Will be "A" grade quality wood veneer and each piece may vary in color and grain. Picture isn't very good, but the veneer looks good. About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.  Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.   Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40”   Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” Phenolic backed veneer = 1/16th"-1/25th" How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly.   Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection

Directions

Similar products from Industrial Wood & Interline

Wood Veneer Mahogany 14x100 6Pcs Total Raw Veneer "EXOTIC" MAH.S3 5-3-16

Wood Veneer Mahogany 14x100 6Pcs Total Raw Veneer "EXOTIC" MAH.S3 5-3-16

  • Jeffersonville, Indiana, United States
  • Jun 4th
Wood Veneer Red Birch 48x98 1 Piece 10Mil Paper Backed "EXOTIC" HIV 17

Wood Veneer Red Birch 48x98 1 Piece 10Mil Paper Backed "EXOTIC" HIV 17

  • Jeffersonville, Indiana, United States
  • Jun 4th
Wood Veneer Striped Sapele 48x98 1 Piece Wood Backed "EXOTIC" HIV 53

Wood Veneer Striped Sapele 48x98 1 Piece Wood Backed "EXOTIC" HIV 53

  • Jeffersonville, Indiana, United States
  • Jun 4th
Wood Maple Veneer 114x9,12,16 total 3pcs RAW VENEER 1/46 N962.

Wood Maple Veneer 114x9,12,16 total 3pcs RAW VENEER 1/46 N962.

  • Clarksville, Indiana, United States
  • Jun 3rd
Wood Maple Veneer 113x10,13,15 total 3pcs RAW VENEER 1/46 N963.

Wood Maple Veneer 113x10,13,15 total 3pcs RAW VENEER 1/46 N963.

  • Clarksville, Indiana, United States
  • Jun 3rd
Wood Maple Veneer 114x11,13,15 total 3pcs RAW VENEER 1/46 N964.

Wood Maple Veneer 114x11,13,15 total 3pcs RAW VENEER 1/46 N964.

  • Clarksville, Indiana, United States
  • Jun 3rd
Wood Maple Veneer 114x10,16,20 total 3pcs RAW VENEER 1/46 N965.

Wood Maple Veneer 114x10,16,20 total 3pcs RAW VENEER 1/46 N965.

  • Clarksville, Indiana, United States
  • Jun 3rd
Carpathian Elm Burl wood veneer 6" x 6" raw with no backing 1/42" thickness "AA"

Carpathian Elm Burl wood veneer 6" x 6" raw with no backing 1/42" thickness "AA"

  • Louisville, Kentucky, United States
  • Jun 3rd
Maple Curly Figured wood veneer 6" x 17" raw with no backing "A" grade 1/42"

Maple Curly Figured wood veneer 6" x 17" raw with no backing "A" grade 1/42"

  • Louisville, Kentucky, United States
  • Jun 3rd
Curly Maple Tiger Figured wood veneer 9.5" x 4.5" no backing "AA" grade 1/42"

Curly Maple Tiger Figured wood veneer 9.5" x 4.5" no backing "AA" grade 1/42"

  • Louisville, Kentucky, United States
  • Jun 3rd
Rosewood wood veneer 10" x 5" with no backer "A" grade quality 1/32"-1/42"

Rosewood wood veneer 10" x 5" with no backer "A" grade quality 1/32"-1/42"

  • Louisville, Kentucky, United States
  • Jun 3rd
Walnut wood veneer 24" x 24" on paper backer "A" grade quality 1/40th" thickness

Walnut wood veneer 24" x 24" on paper backer "A" grade quality 1/40th" thickness

  • Louisville, Kentucky, United States
  • Jun 3rd
Cherry wood veneer 24" x 24" on paper backer "A" grade quality 1/40th" thickness

Cherry wood veneer 24" x 24" on paper backer "A" grade quality 1/40th" thickness

  • Louisville, Kentucky, United States
  • Jun 3rd
Red Oak wood veneer 4" x 14" on paper backer "A" grade quality 1/40th" thickness

Red Oak wood veneer 4" x 14" on paper backer "A" grade quality 1/40th" thickness

  • Louisville, Kentucky, United States
  • Jun 3rd
Carpathian Elm Burl wood veneer 3" x 7" raw with no backing 1/32"-1/42" thick

Carpathian Elm Burl wood veneer 3" x 7" raw with no backing 1/32"-1/42" thick

  • Louisville, Kentucky, United States
  • Jun 3rd
African Mahogany wood veneer 7" x 6" on phenolic backer "A" grade quality

African Mahogany wood veneer 7" x 6" on phenolic backer "A" grade quality

  • Louisville, Kentucky, United States
  • Jun 3rd
Red Oak wood veneer 6" x 11" on paper backer "A" grade quality 1/40th"

Red Oak wood veneer 6" x 11" on paper backer "A" grade quality 1/40th"

  • Louisville, Kentucky, United States
  • Jun 3rd
Maple wood veneer 4" x 9" with phenolic backer "A" grade quality 1/20th" thick

Maple wood veneer 4" x 9" with phenolic backer "A" grade quality 1/20th" thick

  • Louisville, Kentucky, United States
  • Jun 3rd
Rosewood wood veneer 18" x 1.25" with paper backer "A" grade quality 1/40th"

Rosewood wood veneer 18" x 1.25" with paper backer "A" grade quality 1/40th"

  • Louisville, Kentucky, United States
  • Jun 3rd
Maple wood veneer 5" x 8" with phenolic backer"A" grade quality 1/20th" thick

Maple wood veneer 5" x 8" with phenolic backer"A" grade quality 1/20th" thick

  • Louisville, Kentucky, United States
  • Jun 3rd

People who viewed this item also vieved

MK Diamond 137158 MK-200 Premium 8-Inch Wet Cutting Continuous Rim Saw Blade wit

MK Diamond 137158 MK-200 Premium 8-Inch Wet Cutting Continuous Rim Saw Blade wit

  • United States
  • Jan 30th
Freud T25397 7-1/4" x 5/8" 44t MTCG .063 Composite Decking Blade

Freud T25397 7-1/4" x 5/8" 44t MTCG .063 Composite Decking Blade

  • United States
  • Jan 30th
*LOT OF 2* REBEL BUTCHER 601-939-2214 6019392214 5/8" BANDSAW BLADES 3 TEETH NEW

*LOT OF 2* REBEL BUTCHER 601-939-2214 6019392214 5/8" BANDSAW BLADES 3 TEETH NEW

  • Chandler, Arizona, United States
  • Jan 30th
180Kg/396Lbs Holding Capacity Quick Release Latch Type Toggle Clamp GH-40323

180Kg/396Lbs Holding Capacity Quick Release Latch Type Toggle Clamp GH-40323

  • HK, Hong Kong
  • Jan 30th
NEW GLUING PIPE CLAMPS (4 CLAMPS) woodworking black iron pipes tool tools 3/4"

NEW GLUING PIPE CLAMPS (4 CLAMPS) woodworking black iron pipes tool tools 3/4"

  • Clarks Summit, Pennsylvania, United States
  • Jan 30th
CABINET FACE FRAME GLUE CLAMP FOR WOOD WOODWORKING CABINETMAKER'S GLUING TOOL

CABINET FACE FRAME GLUE CLAMP FOR WOOD WOODWORKING CABINETMAKER'S GLUING TOOL

  • Vancouver, Washington, United States
  • Jan 30th
1" Mortising Chisel Bit w 2 carbide tip augers commercial Steel Mortise waxed

1" Mortising Chisel Bit w 2 carbide tip augers commercial Steel Mortise waxed

  • Greenville, South Carolina, United States
  • Jan 30th
Irwin E88 Electric Drill Bill Extension 88 Series Wood Bits Made in USA

Irwin E88 Electric Drill Bill Extension 88 Series Wood Bits Made in USA

  • Chelsea, Alabama, United States
  • Jan 30th
3/16 X 12" LONG DRILL BIT

3/16 X 12" LONG DRILL BIT

  • Belding, Michigan, United States
  • Jan 30th
WALKER TURNER 6" Jointer Instructions & Parts Manual

WALKER TURNER 6" Jointer Instructions & Parts Manual

  • Nixa, Missouri, United States
  • Jan 30th
WALKER TURNER 6 inch Jointer P908 & P910 Instructions & Parts Manual 0746

WALKER TURNER 6 inch Jointer P908 & P910 Instructions & Parts Manual 0746

  • Nixa, Missouri, United States
  • Jan 30th
WALKER TURNER 3110 12" Band Saw Parts Manual 0745

WALKER TURNER 3110 12" Band Saw Parts Manual 0745

  • Nixa, Missouri, United States
  • Jan 30th
5 Micron Outter Filter for W1690 Air Cleaner / Shop Fox #D3210

5 Micron Outter Filter for W1690 Air Cleaner / Shop Fox #D3210

  • Sturgis, Michigan, United States
  • Jan 30th
1 Micron Inner Filter for W1690 Air Cleaner / Shop Fox #D3209

1 Micron Inner Filter for W1690 Air Cleaner / Shop Fox #D3209

  • Sturgis, Michigan, United States
  • Jan 30th
Midwesco Dust Collector Air Filter Bags Cloth O.D 48"L x 7" Opening

Midwesco Dust Collector Air Filter Bags Cloth O.D 48"L x 7" Opening

  • New Paris, Indiana, United States
  • Jan 30th
3/4 INCH NEW DOVETAIL BIT 2 FLUTES CARBIDE # 7709

3/4 INCH NEW DOVETAIL BIT 2 FLUTES CARBIDE # 7709

  • Las Vegas, Nevada, United States
  • Jan 30th
Lot of 6 - Tadco Lamination Items (B2)

Lot of 6 - Tadco Lamination Items (B2)

  • Broomfield, Colorado, United States
  • Jan 30th
LMT Onsrud 41-01 1" Double Edge Carbide Tipped Cove Router Bit

LMT Onsrud 41-01 1" Double Edge Carbide Tipped Cove Router Bit

  • Waukegan, Illinois, United States
  • Jan 30th
5pcs 1/4*3/8 Woodwork cutters woodworking opening Tools CNC machine

5pcs 1/4*3/8 Woodwork cutters woodworking opening Tools CNC machine

  • shenzhen, China
  • Feb 14th
2 Flute Ball Nosed End Mill Cutter 3.175*1.5*6mm CNC Milling Tools

2 Flute Ball Nosed End Mill Cutter 3.175*1.5*6mm CNC Milling Tools

  • shenzhen, China
  • Feb 14th
2 Flute Ball Nosed End Mill Cutter 3.175*1.0*4mm CNC Milling Tools

2 Flute Ball Nosed End Mill Cutter 3.175*1.0*4mm CNC Milling Tools

  • shenzhen, China
  • Feb 14th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies