Wessel Lba805 Cnc Drill/route/ Programmer

US $3,200.00

Bolingbrook, Illinois, United States
Jan 30th

Open on mobile:
QR code

Used ELMAR WESSEL LBA 805, CNC Router, Single Spindle; S/N 841207 Fully Functional. Comes with all manuals and prints. Specifications: Max. Positioning Speed in X & Y Axes......12 m/min Max. Feed Rate in Z Axis.........................15 m/min X & Y Resolution......................................0.01 mm Z Resolution............................................0.1 mm Motor: Starting Torque...................................1.5 Nm (13.3 in./lbs.) Starting Current..................................3.8 Amps Max. Speed.........................................1450 RPM Voltage regulator?...............................42.0 Electrical Characteristics......................220 VAC / 60 Cycle / 2 kVA Control Box: Electrical Characteristics......................220/240 VAC / 50 Cycle / with Euro Plug Dimensions...............................................44 1/2" W x 40 3/4" D x 55 3/4" H F.O.B.........................................................Plainfield, Illinois 1. SPECIFICATIONS The CCC 82.06 is a 2-axis (X-Y) continuous path control with electronic drill stroke control (Z axis), incorporating many special functions for drilling and routing PC boards described below. The entire control is contained in a handy control box (500x170x105 mm) which is ideally located directly on the machine. The CompacTrol CCC 82.06 consists of the following 1.1 Central Processing Unit The CPU is equipped with a microprocessor and a memory capacity for up to 6000 data blocks. The standard software includes the following functions: A. # Point-to-point control for 2 axis, X and Y # Drill stroke control, Z axis . # Automatic grid system programming with freely selectable grid # Automatic IC programming with freely selectable hole spacing # Automatic Single-in-line programming even for oblique patterns # 8 times nested step-and-repeat functions (8 brackets within brackets) with mirror image capability in X and Y and program rotation by g0 degrees # Scale correction, separate shrink and expand for X and Y # Tool constants store for 25 different tool diameters with automatic tool change # Freely programmable assignment of several tool magazines to a specific T-function, with automatic sequencing of the magazine numbers upon reaching the predetermined life of the particular tool # Programmable tool life for drills and routing cutters # Editor program for selective search, cancellation and insertion of data blocks # Drill stroke counter for each tool # Freely selectable spindle speed (15000 to 60000 rpm) # Freely selectable feed rate in mm/sec for drilling and routing # Programmable drill stroke (different depths with a single tool) # Park positions at freely selectable X and Y coordinates # Full floating zero # Zero shift of individual parts of the program # Combination of several programs # Drag error free continuous path control with circular interpolation # Automatic cutter radius compensation # Status change # Addition of offsets # Programmable routing level # Incremental or absolute programming for drilling and routing # Programming full circles # Programming squares and rectangles # Rounding off corners tangentially with any radius # Programming limbs by putting in two base points connected by the radius # Programming quarter circles # Automatic approach of circles, squares or rectangles from inside or outside # String data search of particular commands Continuous block number display # Continuous status display # Position control of the joystick # Software controlled monitoring of the work area # Selfcheck of hardware # Software controlled program preparation # Automatic check of magnetic tape cassette write and read procedures # Automatic check of positioning accuracy in X and Y # Automatic display of more than 30 error messages for hardware faults or programming mistakes # Connection for external video display unit # Connection for fully automatic centering scope # RS 232/V24 interface for peripherals and DNC # Option to connect a perforated tape reader or perforator with up to 1000 characters/second # Option to connect a printer # Automatic software controlled compensation between mechanics and electronics B. Special software may be provided for: 1. special customer requirements 2. Macro technique 3. Direct on-line communication with central computers, CAD systems, other controls or computers 4. The following non-WESSEL codes may be read and processed using special optional software editions. Code conversion to WESSEL CCC requirements is done automatically during the 1000 char/sec reading process. a) Excellon Format 1 b) Excellon Format 2 c) Sieb + Meyer punched tape NC, CNC Format 1000, CNC Format 3000 d) Sieb + Meyer magnetic tape cassettes Formats 1000 and Format 3000 e) NEDAC f) RETAB g) TRUDRIL (Advanced Controls) Other code conversion software may be quoted upon request. Perforated tapes may be in EIA, ISO or ASCII and as well in inches, metric, step-and-repeat, with leading zeros, trailing zeros and programmed in 0.01 or 0.001 resolutions. Data transmission is per RS232C (compatible to V24). 1.2 3-Axis Motor Control The maximum positioning speed in X and Y is 12 m/min and the maximum feed rate for Z is 15 m/min. The resolution in X and Y is 0.01 mm. The Z axis resolution of 0.1 is obtained by an analogue measuring system. 1.3 Magnetic Tape Cassette Unit The cassette unit is designed to accept standard Compact Cassettes C60. Use cassettes marked "SM" (for security mechanism), e.g. BASF Ferro Super LH (SM). The writing or reading time is approx. 15 sec for 1000 data blocks. Insert cassettes with full spool towards the rear of the machine to avoid time consuming rewinding processes. 1.4 Compact Housing It is designed as a compact, space saving, handy control panel with all operational controls and the read-out. Note: Buyer is responsible for arranging shipment and shipping cost on this item. For more information you can contact Gary @ cncwizard@sbcglobal.net

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Wessel
Country/Region of Manufacture	Germany
Model	LBA805