+ Post new Ad
VTG NOS Snap-On 3 Jaw Geared Type Drill Chuck W/Key Original Box DCA 500, US $330 – Picture 0
VTG NOS Snap-On 3 Jaw Geared Type Drill Chuck W/Key Original Box DCA 500, US $330 – Picture 0

Vtg Nos Snap-on 3 Jaw Geared Type Drill Chuck W/key Original Box Dca 500

US $330

  • Northbrook, Illinois, United States
  • Jun 10th
Open on mobile:
QR code
VTG NOS Snap-On 3 Jaw Geared Type Drill Chuck W/Key Original Box DCA 500 We travel the States of Florida, Illinois and Michigan, depending on the season, seeking unique vintage collectible items to offer for sale. Almost all are used and vintage with age appropriate wear. Check the pictures and complete description to see what you will receive. We appreciate your looking at our items. We are back in Chicago for the summer and have already found lots of treasures.Check our feedback on this new load of vintage tools.We just purchased an estate lot of antique and vintage Machinist and other  tools,gauges etc.Lots of the old manufacturers included.Lots of original boxes and cases, and there is some musty smells on some that will need to be aired out as these pieces have not seen the light in a long time.Check the description and pictures.What you see is what you will get.We will combine to save on shipping where ever we can.Let us know if you have any questions, we are not very knowledgible about these tools but will try to get the answers. You are bidding on a vintage New Old Stock Snap-On DCA 500 3 Jaw Geared Type Drill Chuck With Key. The label says 1/16-1/2 Cap.Still in the original box which is in pretty good vintage condition.Check the pictures. Pictures sell! Auctiva Free Image Hosting. Show off your items with Auctiva's Listing Templates Auctiva, THE simple solution for eBay sellers.

Directions

Similar products from Boring Chucks

Albrecht 75404 Key-Lock CNC Drill Chuck, Capacity: 1/32'-5/8'

Albrecht 75404 Key-Lock CNC Drill Chuck, Capacity: 1/32'-5/8'

  • Duncan, South Carolina, United States
  • Jun 10th
3/4" Jacobs Chuck

3/4" Jacobs Chuck

  • Whitehouse, Ohio, United States
  • Jun 10th
Jacobs #18 lathe chuck ball bearing super

Jacobs #18 lathe chuck ball bearing super

  • New Baltimore, Michigan, United States
  • Jun 10th
Jacobs ball Bearing Super Chuck #14 with #3 morse lathe

Jacobs ball Bearing Super Chuck #14 with #3 morse lathe

  • New Baltimore, Michigan, United States
  • Jun 10th
Jacobs #6A Drill Chuck

Jacobs #6A Drill Chuck

  • Whitehouse, Ohio, United States
  • Jun 10th
Jacobs Chuck with egg beater drill USA Multicraft 0-1/4 in 0-65mm CAP 3/8-24 THD

Jacobs Chuck with egg beater drill USA Multicraft 0-1/4 in 0-65mm CAP 3/8-24 THD

  • Colfax, California, United States
  • Jun 10th
Jacobs 0-1/2" Lathe Drill Chuck 34-06

Jacobs 0-1/2" Lathe Drill Chuck 34-06

  • Boaz, Alabama, United States
  • Jun 10th
1 Lot of 2 Jacobs Drill Chucks Models 6A and 32B please read full description

1 Lot of 2 Jacobs Drill Chucks Models 6A and 32B please read full description

  • Simi Valley, California, United States
  • Jun 10th
VINTAGE JACOBS CHUCKS MODEL 34 PLAIN BEARING CHUCK

VINTAGE JACOBS CHUCKS MODEL 34 PLAIN BEARING CHUCK

  • Wellsville, New York, United States
  • Jun 10th
Vintage Starrett No.234 Micrometer Standards Orig Wood Case for 1" to 5" Mics

Vintage Starrett No.234 Micrometer Standards Orig Wood Case for 1" to 5" Mics

  • Northbrook, Illinois, United States
  • Jun 10th
K4 CHUCK KEY FOR DRILL

K4 CHUCK KEY FOR DRILL

  • Gatlinburg, Tennessee, United States
  • Jun 10th
Jacobs 14n super chuck

Jacobs 14n super chuck

  • Temperance, Michigan, United States
  • Jun 10th
Drill America DEWA0304 Qualtech Drill Chuck Arbor, #3 Morse Taper Shank To #4

Drill America DEWA0304 Qualtech Drill Chuck Arbor, #3 Morse Taper Shank To #4

  • USA, United States
  • Jun 10th
KENNAMETAL CV40DC13M12 1/2 SPEED DRILL CHUCK KEYLESS CHUCK

KENNAMETAL CV40DC13M12 1/2 SPEED DRILL CHUCK KEYLESS CHUCK

  • Collinsville, Oklahoma, United States
  • Jun 10th
vintage JACOBS CHUCK No.1A 0-3/4" LOT 20

vintage JACOBS CHUCK No.1A 0-3/4" LOT 20

  • Grayling, Michigan, United States
  • Jun 9th
Used Jacob's Multi-craft drill chuck 1/16" -3/8" cap 3/8"x 24 thread MT LOT 4

Used Jacob's Multi-craft drill chuck 1/16" -3/8" cap 3/8"x 24 thread MT LOT 4

  • Grayling, Michigan, United States
  • Jun 9th
Used Jacob's Multi-craft drill chuck 1/16" -3/8" cap 3/8"x 24 thread MT LOT 6

Used Jacob's Multi-craft drill chuck 1/16" -3/8" cap 3/8"x 24 thread MT LOT 6

  • Grayling, Michigan, United States
  • Jun 9th
Used JACOBS Multi-craft drill chuck 1/16" -3/8" cap 3/8"x 24 thread MT LOT 12

Used JACOBS Multi-craft drill chuck 1/16" -3/8" cap 3/8"x 24 thread MT LOT 12

  • Grayling, Michigan, United States
  • Jun 9th
Used Jacob's Multi-craft drill chuck 1/16" -3/8" cap 3/8"x 24 thread MT LOT 1

Used Jacob's Multi-craft drill chuck 1/16" -3/8" cap 3/8"x 24 thread MT LOT 1

  • Grayling, Michigan, United States
  • Jun 9th
JACOBS Drill Chuck With Key NO 32 - Cap 0"-3/8" THREAD LOT 19

JACOBS Drill Chuck With Key NO 32 - Cap 0"-3/8" THREAD LOT 19

  • Grayling, Michigan, United States
  • Jun 9th

People who viewed this item also vieved

NOS NEW ARBOR PRESS RKB PRODUCTS RK100 MACHINIST PRESS FIT SHOP BEARING RACE

NOS NEW ARBOR PRESS RKB PRODUCTS RK100 MACHINIST PRESS FIT SHOP BEARING RACE

  • Ridgefield, Washington, United States
  • Jan 30th
HARDINGE 16C - 5C COLLET ADAPTER + FACE PLATE CNC LATHE

HARDINGE 16C - 5C COLLET ADAPTER + FACE PLATE CNC LATHE

  • Highland, New York, United States
  • Jan 30th
Iscar 5/8" x 7" Boring Bar BBN-10

Iscar 5/8" x 7" Boring Bar BBN-10

  • Johnson City, New York, United States
  • Jan 30th
Kennametal 5/8" x 6.5" Boring Bar A10 SCLPL3

Kennametal 5/8" x 6.5" Boring Bar A10 SCLPL3

  • Johnson City, New York, United States
  • Jan 30th
2 PCS. CAT50 LONG TOOL HOLDER 3/8 & 1/2 CT50 haas fadal mazak mori cnc mill LMSI

2 PCS. CAT50 LONG TOOL HOLDER 3/8 & 1/2 CT50 haas fadal mazak mori cnc mill LMSI

  • Sun Valley, California, United States
  • Jan 30th
UNIVERSAL 2PCS COLLET CAT50 CT50 TOOL HOLDER haas fadal mazak mori cnc mill LMSI

UNIVERSAL 2PCS COLLET CAT50 CT50 TOOL HOLDER haas fadal mazak mori cnc mill LMSI

  • Sun Valley, California, United States
  • Jan 30th
FALK 351271 BUSHING *NEW IN A BOX*

FALK 351271 BUSHING *NEW IN A BOX*

  • Camarillo, California, United States
  • Jan 30th
DODGE 3020 X 75MM BUSHING *NEW IN A BOX*

DODGE 3020 X 75MM BUSHING *NEW IN A BOX*

  • Camarillo, California, United States
  • Jan 30th
NICE KOMET Dihart 545.87.004 DHA 115 CAT50 Tool Holder 545.40.004A ABS50 Reaming

NICE KOMET Dihart 545.87.004 DHA 115 CAT50 Tool Holder 545.40.004A ABS50 Reaming

  • Hopkins, Minnesota, United States
  • Jan 30th
(5) CAT50 Morse Taper #4 Tool Holder, Parlec C50-04MT3, MT4 MT3 MT2 adapters

(5) CAT50 Morse Taper #4 Tool Holder, Parlec C50-04MT3, MT4 MT3 MT2 adapters

  • Hopkins, Minnesota, United States
  • Jan 30th
Valenite 3" dia. indexable Face mill cutter # mcn90-306 5r3-125f

Valenite 3" dia. indexable Face mill cutter # mcn90-306 5r3-125f

  • Columbia, Kentucky, United States
  • Jan 30th
FACE MILLING CUTTER 3-7/8" DIAMETER INDEXABLE MODEL GFSM4000 1-1/2" BORE +INSERT

FACE MILLING CUTTER 3-7/8" DIAMETER INDEXABLE MODEL GFSM4000 1-1/2" BORE +INSERT

  • Jamestown, New York, United States
  • Jan 30th
SUNNEN Mandrel K10 323AH <1571>

SUNNEN Mandrel K10 323AH <1571>

  • Saint Louis, Missouri, United States
  • Jan 30th
8&#034; SLOTTED MANDREL 1/4&#034; SHANK &amp; BODY SLOTTED HEAD CORE SANDING INTERNAL HOLES

8" SLOTTED MANDREL 1/4" SHANK & BODY SLOTTED HEAD CORE SANDING INTERNAL HOLES

  • North Hollywood, California, United States
  • Jan 30th
EDM Electrical Discharge Machine Agie Elox Mondo 3

EDM Electrical Discharge Machine Agie Elox Mondo 3

  • Montreal-Nord, Quebec, Canada
  • Jan 30th
Jet 660012 CK-12 Clamping Kit 52 pc w/ Tray

Jet 660012 CK-12 Clamping Kit 52 pc w/ Tray

  • Chillicothe, Missouri, United States
  • Jan 30th
USED EMCO VDI 30 SQUARE SHANK TOOL HOLDER 436430

USED EMCO VDI 30 SQUARE SHANK TOOL HOLDER 436430

  • Valley View, Pennsylvania, United States
  • Jan 30th
ALORIS DA #7 UNIVERSAL PARTING BLADE HOLDER 1-1/8&#034; BLADE HEIGHT CNC LATHE USA

ALORIS DA #7 UNIVERSAL PARTING BLADE HOLDER 1-1/8" BLADE HEIGHT CNC LATHE USA

  • Portland, Oregon, United States
  • Jan 30th
SAUTER SPINDLE UNIT 0.5.934.106-103832

SAUTER SPINDLE UNIT 0.5.934.106-103832

  • Glassboro, New Jersey, United States
  • Jan 30th
HK PRAZISIONSTECHNIK GMBH 242-50 MULTISPINDLE HEAD

HK PRAZISIONSTECHNIK GMBH 242-50 MULTISPINDLE HEAD

  • Sunman, Indiana, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies