Vibralign Belt Hog Laser Belt Alignment Tool

US $336

White Marsh, Virginia, United States
Oct 28th

Open on mobile:
QR code

Description: USED ITEM. SOME SIGN OF USE SEE PICTURES Comes with everything pictured. Item works as it should with no issues. Belt Hog Laser Pulley Alignment Tool Minimize Downtime Use pulley groove as reference point Minimal Training Needed Reduce bearing wear and vibration levels while extending bearing lifespan Minimizes Unscheduled Stops Accurate, measures from the pulley grooves where the belts operate VibrAlign Belt Hog Laser Pulley Alignment Tool The VibrAlign Belt Hog uses the pulley groove as the reference, allowing you to achieve a precise belt alignment which reduces wear, bearing failures and vibrations. With the Belt Hog you are never in doubt on whether your belt transmissions are aligned or not. By using the groove as reference you will achieve a precise alignment which reduces belt wear, bearing failures and vibrations. Belt Hog Pulley Alignment Tool Squealing, shaking, out-of-line belts and pulleys are more than a nuisance. They're the cause of expensive downtime, shortened equipment life, and inefficient operation. If you ever have those problems, it's time to holler for the Belt Hog. The Belt Hog makes it simple to align belts and pulleys. You won't have to remove the belts to make quick, accurate adjustments over distances of 6" to 20 feet. One person can accomplish an alignment with no training other than reading the short instruction manual. Belt Hog mounts in the grooves-right where the power is transferred. Groove mounting makes it simpler to keep everything parallel. Belt guards can often be left on, and pulleys on shafts set in different directions can be aligned just as easily. Bright dual LASER beams let you know when you've got things straight. Belt Hog Benefits: This little 1.6-pound tool is a heavyweight when it comes to making things simple. You've heard of living high on the hog? Welcome to working high on the Hog. Benefits of good alignment: Reduces downtime Extends belt and pulley life Reduces vibration and belt noise Minimizes unscheduled stops Advantages of the Belt Hog: Accurate, measures from the pulley grooves where the belts operate Easy to use, no training required Fast, one person operation No need to remove the belts Measures vertical angle, horizontal angle and offset simultaneously Measures distances from 6" to 20 feet Measures pulley diameters 3" and larger Belt Hog Alignment Procedure The Belt Hog uses two LASER transmitter for projecting of LASER lines on the opposite LASER unit. By adjusting the pulleys so that the laser line coincides with the reference line on the opposite LASER unit, the pulleys are aligned. Mounting of the Belt Hog units: Note: The magnets, which holds the unit to the pulley, are very strong. Do not pinch your fingers! 1. Position both units with the spring action probes resting in the same groove on both pulleys and the units are facing each other as shown below. When the units are mounted, turn on the LASERS. Each LASER generates a line on the opposite unit. When correctly aligned the lines coincide with the reference marks on the labels on both units. If the belt transmission is mis-aligned, start by correcting the angular error. It is important that the pulleys are mounted correctly on the shafts and that the shafts are straight before starting the alignment process. Wobbling or warped pulleys affects the alignment quality severely.