+ Post new Ad
Valve Seat Cutter 45 Degrees 3-1/16" Hardened Steel Vintage Jeep, Cars, US $770 – Picture 0
Valve Seat Cutter 45 Degrees 3-1/16" Hardened Steel Vintage Jeep, Cars, US $770 – Picture 0

Valve Seat Cutter 45 Degrees 3-1/16" Hardened Steel Vintage Jeep, Cars

US $770

  • New Delhi, India
  • May 24th
Open on mobile:
QR code
Valve Seat Cutter 45 Degrees 3-1/16" Hardened Steel Vintage Jeep, Cars Product Description VINTAGE JEEP, CARS VALVE SEAT CUTTER 45 DEGREES 3-1/16" HARDENED STEEL  Grab this high quality brand new unused Valve Seat Cutter set -  essential tool for restoring Vintage Cars, Jeeps, Tractors and Motorcycles.   Manufactured in India using high quality carbon steel, properly hardened and tempered, each cutter in accurately grade for best results. This is must for Vintage Car and Bikes Restorers Product specifications: Size: 3-1/16? Degree: 45 WEIGHT-312 gms Applications: Suitable for all Vintage Cars, Jeeps, Tractors, Trucks and Motorcycles like Jeep, Vintage Morris, Mini, Mercedes, Perkins P-6, Leyland and many other. Please Note: These Valve Seat Cutters are not suited to modern hardened seats. These will cut only soft seats which came in most Vintage Car and Motor Bikes. Please note that the  valve cutter set are covered by grease to avoid rust, you need to clean before using. Loose Valve Cutters, Handles and Rods are also available at special request, we can also produce Valve Cutters in special sizes if required. inkfrog terapeak inkFrog Analytics

Directions

Similar products from Other Cutting Equipment & Expendables

B & S No 1 - 7P 135 To Rack Depth .308 Involute Gear Cutters HS -12 Gear Cutter

B & S No 1 - 7P 135 To Rack Depth .308 Involute Gear Cutters HS -12 Gear Cutter

  • Buffalo, Minnesota, United States
  • May 24th
THURSTON 2 3/4" x .102" x 1" STRAIGHT TOOTH Side Milling Cutter USED in EX COND

THURSTON 2 3/4" x .102" x 1" STRAIGHT TOOTH Side Milling Cutter USED in EX COND

  • Buffalo, Minnesota, United States
  • May 24th
B & S No 4 - 20P 26 To 34T Depth .108 Involute Gear Cutters HS -12 Gear Cutter

B & S No 4 - 20P 26 To 34T Depth .108 Involute Gear Cutters HS -12 Gear Cutter

  • Buffalo, Minnesota, United States
  • May 24th
GOODARD 6" x 5/16" x 1 1/4" STAGGERED TOOTH Side Milling Cutter HSS

GOODARD 6" x 5/16" x 1 1/4" STAGGERED TOOTH Side Milling Cutter HSS

  • Buffalo, Minnesota, United States
  • May 24th
MORSE No 5 - 11P 21 TO 25T Depth .196 Involute Gear Cutters HS -12 Gear Cutter

MORSE No 5 - 11P 21 TO 25T Depth .196 Involute Gear Cutters HS -12 Gear Cutter

  • Buffalo, Minnesota, United States
  • May 24th
MORSE No 5 - 9P 21 To 25T Depth .240 Involute Gear Cutters HS -12 Gear Cutter

MORSE No 5 - 9P 21 To 25T Depth .240 Involute Gear Cutters HS -12 Gear Cutter

  • Buffalo, Minnesota, United States
  • May 24th
B & S No 6 - 10P 17 TO 20T Involute Gear Cutters HS -12 Gear Cutter

B & S No 6 - 10P 17 TO 20T Involute Gear Cutters HS -12 Gear Cutter

  • Buffalo, Minnesota, United States
  • May 24th
NIAGARA 4" x 1" x 1 1/4" STAGGERED TOOTHSide Milling Cutter USED in EX CON

NIAGARA 4" x 1" x 1 1/4" STAGGERED TOOTHSide Milling Cutter USED in EX CON

  • Buffalo, Minnesota, United States
  • May 24th
MORSE 5" x 1/2" x 1 1/4" STAGGERED TOOTH Side Milling Cutter USED in EX CON

MORSE 5" x 1/2" x 1 1/4" STAGGERED TOOTH Side Milling Cutter USED in EX CON

  • Buffalo, Minnesota, United States
  • May 24th
B & S No 2 - 20P 55 To 134T .108 Depth Involute Gear Cutters HS -12 Gear Cutter

B & S No 2 - 20P 55 To 134T .108 Depth Involute Gear Cutters HS -12 Gear Cutter

  • Buffalo, Minnesota, United States
  • May 24th
Valve Seat Cutter 3-1/16 Inches Hardened Steel 45 Deg

Valve Seat Cutter 3-1/16 Inches Hardened Steel 45 Deg

  • New Delhi, India
  • May 24th
Valve Seat Cutter Hardened Steel 2 - 7/8” Perkins P-6, Leyland 45 Degree

Valve Seat Cutter Hardened Steel 2 - 7/8” Perkins P-6, Leyland 45 Degree

  • New Delhi, India
  • May 24th
Valve Seat Cutter 2-5/16 Inch Hardened Steel 45Deg

Valve Seat Cutter 2-5/16 Inch Hardened Steel 45Deg

  • New Delhi, India
  • May 24th
Hardened Steel Valve Seat Cutter 1-1/8” Perkins P-6, Leyland Engine

Hardened Steel Valve Seat Cutter 1-1/8” Perkins P-6, Leyland Engine

  • New Delhi, India
  • May 24th
New Valve Seat Cutter 1inch Harden Steel 45 Deg. - Vintage Morris, Mercedes

New Valve Seat Cutter 1inch Harden Steel 45 Deg. - Vintage Morris, Mercedes

  • New Delhi, India
  • May 24th
METAL KNURLING CUTTERS LOT, 6 PIECES RANDOM PATTERN FOR LATHES MILLING MACHINES

METAL KNURLING CUTTERS LOT, 6 PIECES RANDOM PATTERN FOR LATHES MILLING MACHINES

  • Mountain View, California, United States
  • May 24th
Quality Harden Steel Valve Seat Cutter 1 Inches Degree - 45

Quality Harden Steel Valve Seat Cutter 1 Inches Degree - 45

  • New Delhi, India
  • May 24th
Harden Steel Valve Seat Cutter 1-1/16 Inch 45 Degree for Best Quality Cutter

Harden Steel Valve Seat Cutter 1-1/16 Inch 45 Degree for Best Quality Cutter

  • New Delhi, India
  • May 24th
X 70 STEEL WEDGE SHIM SPACER 1" X 1" FOR 5/16 BOLT 1/4 TO 1/8 WEDGE NOS

X 70 STEEL WEDGE SHIM SPACER 1" X 1" FOR 5/16 BOLT 1/4 TO 1/8 WEDGE NOS

  • Vera, Oklahoma, United States
  • May 24th
Fellows #7 Type 7 High Speed Gear Shaver 240v 3 Ph Cutter

Fellows #7 Type 7 High Speed Gear Shaver 240v 3 Ph Cutter

  • Millstadt, Illinois, United States
  • May 24th

People who viewed this item also vieved

Hassay-Savage 0.6560" Diameter Spline Pull Broach 2625

Hassay-Savage 0.6560" Diameter Spline Pull Broach 2625

  • Glassboro, New Jersey, United States
  • Jan 30th
Hassay-Savage 0.6565" Diameter Spline Pull Broach 26010

Hassay-Savage 0.6565" Diameter Spline Pull Broach 26010

  • Glassboro, New Jersey, United States
  • Jan 30th
5 SEALED PACKS 50 INSERTS TUNGALOY CERAMIC INSERTS SPGN 324 (CARBIDE)

5 SEALED PACKS 50 INSERTS TUNGALOY CERAMIC INSERTS SPGN 324 (CARBIDE)

  • New Oxford, Pennsylvania, United States
  • Jan 30th
SUMITOMO CARBIDE INSERTS TNMG 432 GRADE G10E PACK OF 9

SUMITOMO CARBIDE INSERTS TNMG 432 GRADE G10E PACK OF 9

  • New Oxford, Pennsylvania, United States
  • Jan 30th
NTK Ceramic Grooving Inserts VDB188 HC2 Qty 6 <1537C>

NTK Ceramic Grooving Inserts VDB188 HC2 Qty 6 <1537C>

  • Saint Louis, Missouri, United States
  • Jan 30th
NTK Ceramic Grooving Inserts VDB188 HC2 Qty 10 &lt;1537C&gt;

NTK Ceramic Grooving Inserts VDB188 HC2 Qty 10 <1537C>

  • Saint Louis, Missouri, United States
  • Jan 30th
5 NEW 3/16&#034; DIAMETER CARBIDE END MILLS. 4 FLUTE. 3/16&#034; SHANK. MADE IN USA [E268]

5 NEW 3/16" DIAMETER CARBIDE END MILLS. 4 FLUTE. 3/16" SHANK. MADE IN USA [E268]

  • Mentor, Ohio, United States
  • Jan 30th
4 NEW 5/32&#034; SHANK CARBIDE ENDMILLS. 4 FLUTE. DOUBLE END MADE IN USA {E986}

4 NEW 5/32" SHANK CARBIDE ENDMILLS. 4 FLUTE. DOUBLE END MADE IN USA {E986}

  • Mentor, Ohio, United States
  • Jan 30th
PERFORATING PUNCHES YCP 62 3110 .328 PIVOT PUNCH (LOT OF 6) #3133A

PERFORATING PUNCHES YCP 62 3110 .328 PIVOT PUNCH (LOT OF 6) #3133A

  • Resaca, Georgia, United States
  • Jan 30th
25/32-32 1-5/8&#034; hex die NEW Widell USA (930-29B)

25/32-32 1-5/8" hex die NEW Widell USA (930-29B)

  • Oxford, Pennsylvania, United States
  • Jan 30th
Hanson 11214 1/8&#034; To 1/2&#034; Repair Reamer

Hanson 11214 1/8" To 1/2" Repair Reamer

  • United States
  • Jan 30th
machinists reamers

machinists reamers

  • Ashland, Kentucky, United States
  • Jan 30th
STARRET Duratec SFB 8&#039; 9&#034; x 3/8&#034; x .025 10 TEETH FLEXBACK BANDSAW BLADE * NEW

STARRET Duratec SFB 8' 9" x 3/8" x .025 10 TEETH FLEXBACK BANDSAW BLADE * NEW

  • New Freedom, Pennsylvania, United States
  • Jan 30th
NOS! LOT of (6) Marvel 21&#034; POWER HACK SAW BLADES, No. 2106-T, 21&#034;x1-3/4&#034;x.088&#034;

NOS! LOT of (6) Marvel 21" POWER HACK SAW BLADES, No. 2106-T, 21"x1-3/4"x.088"

  • Bremen, Indiana, United States
  • Jan 30th
10 pcs Carbide Endmill Double Flute Spiral CNC Router Bits 3.175x2x22mm 1/8&#039;&#039;

10 pcs Carbide Endmill Double Flute Spiral CNC Router Bits 3.175x2x22mm 1/8''

  • Shandong, China
  • Jan 30th
BRAZED CARBIDE TIPPED TOOL BIT GL16 C6 LATHE TURNING 1&#034; USA GL-16

BRAZED CARBIDE TIPPED TOOL BIT GL16 C6 LATHE TURNING 1" USA GL-16

  • Tujunga, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies