+ Post new Ad
Used- Novatec Dessicant Drying System, Carbon Steel. Consisting of (1) Novatec d, US $2300 – Picture 0
Used- Novatec Dessicant Drying System, Carbon Steel. Consisting of (1) Novatec d, US $2300 – Picture 0

Used- Novatec Dessicant Drying System, Carbon Steel. Consisting Of (1) Novatec D

US $2300

  • Bensenville, Illinois, United States
  • Jun 7th
Open on mobile:
QR code
Used- Novatec Dessicant Drying System, Carbon Steel. Consisting of (1) Novatec d Click To Enlarge Used- Novatec Dessicant Drying System, Carbon Steel. Consisting of (1) Novatec dual tower desiccant bed dryer, model CDM-750, serial #12-798-0296, 750 CFM. Includes blower, cooling coil, two stage filter, Novatec MCD-3000 controller, and temperature controller. (1) Novatec indirect natural gas fired heater, model GFH-750, serial #12-708-0093, 750 CFM, 260,000 maximum BTU, temperature range 160 to 400 degrees F. (1) Novatec drying hopper, model NPH-HOPPER, serial #12-708-0077, 2,500 lbs capacity, with AEC vacuum chamber, model SRC30, 5.5 inlet/outlet. (1) Novatec vacuum chamber, model 02305-25, 1 cubic foot capacity. (1) Novatec hopper, 28" diameter x 28" straight side, with 36" long cone bottom, mounted on stand. Built 1999. ref #: 46323001 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

Used- Killion 1-1/2" Single Screw Extruder, Model KN-150. Approximately 24 to 1

Used- Killion 1-1/2" Single Screw Extruder, Model KN-150. Approximately 24 to 1

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Prodex High Intensity Mixer, Model 60JSS, 304 Stainless Steel. Approximate

Used- Prodex High Intensity Mixer, Model 60JSS, 304 Stainless Steel. Approximate

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Cincinnati Milacron Crammer Feeder. Approximately 5" diameter 304 stainles

Used- Cincinnati Milacron Crammer Feeder. Approximately 5" diameter 304 stainles

  • Bensenville, Illinois, United States
  • Jun 8th
Visual industrial thermoforming former

Visual industrial thermoforming former

  • Jerome, Michigan, United States
  • Jun 8th
GT2 Pulley 20 Teeth Aluminum Bore 5mm width 6mm 3D Printer Reprap Prua I3 CNC

GT2 Pulley 20 Teeth Aluminum Bore 5mm width 6mm 3D Printer Reprap Prua I3 CNC

  • CN, China
  • Jun 8th
10pcs GT2 Pulley 20 Teeth Aluminum 2mm Bore 5mm 3D Printer Reprap Prua I3 CNC

10pcs GT2 Pulley 20 Teeth Aluminum 2mm Bore 5mm 3D Printer Reprap Prua I3 CNC

  • CN, China
  • Jun 8th
2pcs GT2 Pulley 20 Teeth + 2M GT2 Timing Belt 6mm 3D Printer Reprap Prua I3 CNC

2pcs GT2 Pulley 20 Teeth + 2M GT2 Timing Belt 6mm 3D Printer Reprap Prua I3 CNC

  • CN, China
  • Jun 8th
Clear Orange PLA 3D Printer Filament for XYZ Printers 600g 1.75mm

Clear Orange PLA 3D Printer Filament for XYZ Printers 600g 1.75mm

  • Sylmar, California, United States
  • Jun 8th
Used- Tria Granulator, Carbon Steel. Approximate 20" x 26" feed throat with a bo

Used- Tria Granulator, Carbon Steel. Approximate 20" x 26" feed throat with a bo

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Welex 2-1/2" Single Screw Extruder, Model 2.5A.C. Approximately 24 to 1 L/

Used- Welex 2-1/2" Single Screw Extruder, Model 2.5A.C. Approximately 24 to 1 L/

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Henschel HU Series Medium Intensity Mixer, Model HU-500, 304 Stainless Ste

Used- Henschel HU Series Medium Intensity Mixer, Model HU-500, 304 Stainless Ste

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Hobbs Winder, Approximately 56" Wide. Approximately 6 to 75 feet per minut

Used- Hobbs Winder, Approximately 56" Wide. Approximately 6 to 75 feet per minut

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Sutorbilt Medium Pressure Vacuum Loading System consisting of: (1) Sutorbi

Used- Sutorbilt Medium Pressure Vacuum Loading System consisting of: (1) Sutorbi

  • Bensenville, Illinois, United States
  • Jun 7th
Used- L-R Systems Granulator, Carbon Steel. Approximate 20" x 17" feed opening w

Used- L-R Systems Granulator, Carbon Steel. Approximate 20" x 17" feed opening w

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Vacuum Calibration Tank. 2 Section trough, 120" long x 6" wide x 6" deep,

Used- Vacuum Calibration Tank. 2 Section trough, 120" long x 6" wide x 6" deep,

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Custom Downstream Systems Cleated Puller, Model CCH 96-10Q. (2) 10" Wide x

Used- Custom Downstream Systems Cleated Puller, Model CCH 96-10Q. (2) 10" Wide x

  • Bensenville, Illinois, United States
  • Jun 7th
Used- RDN IntelliCut Servo-Driven Cutter, Model AC SERVO. 2 Cutting knives, driv

Used- RDN IntelliCut Servo-Driven Cutter, Model AC SERVO. 2 Cutting knives, driv

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Goodman Stand-Alone Puller, Model 4F. (2) 4" Wide x 30" long belts. Driven

Used- Goodman Stand-Alone Puller, Model 4F. (2) 4" Wide x 30" long belts. Driven

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Killian 1.25" Single Screw Extruder. Approximate 24 to 1 L/D ratio, electr

Used- Killian 1.25" Single Screw Extruder. Approximate 24 to 1 L/D ratio, electr

  • Bensenville, Illinois, United States
  • Jun 7th
Used- Versa Machinery Puller/Cutter, Model DAC 61. Maximum cut capacity 1/2" OD.

Used- Versa Machinery Puller/Cutter, Model DAC 61. Maximum cut capacity 1/2" OD.

  • Bensenville, Illinois, United States
  • Jun 7th

People who viewed this item also vieved

New Fast Heat Mica Band Heater 3" Dia X 1 3/4" Wide 450W 240V 36" Lead BH-09

New Fast Heat Mica Band Heater 3" Dia X 1 3/4" Wide 450W 240V 36" Lead BH-09

  • Tallahassee, Florida, United States
  • Jan 30th
New Fast Heat Mica Band Heater 2 3/4" Dia X 1 1/2" Wide 400W 120V 36" Lead BH-08

New Fast Heat Mica Band Heater 2 3/4" Dia X 1 1/2" Wide 400W 120V 36" Lead BH-08

  • Tallahassee, Florida, United States
  • Jan 30th
New Fast Heat Mica Band Heater 4 5/8" Dia X 1" Wide 360W 240V MD51NW BH-07

New Fast Heat Mica Band Heater 4 5/8" Dia X 1" Wide 360W 240V MD51NW BH-07

  • Tallahassee, Florida, United States
  • Jan 30th
New Fast Heat Mica Band Heater 4 1/2" Dia X 1 3/4" Wide 800W 240V MSP3549 BH-06

New Fast Heat Mica Band Heater 4 1/2" Dia X 1 3/4" Wide 800W 240V MSP3549 BH-06

  • Tallahassee, Florida, United States
  • Jan 30th
New Fast Heat Mica Band Heater 3 5/8" Dia X 1 1/2" Wide 575W 240V BM010525 BH-04

New Fast Heat Mica Band Heater 3 5/8" Dia X 1 1/2" Wide 575W 240V BM010525 BH-04

  • Tallahassee, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies