Touch 'n Seal U2-200 Spray Closed Cell Foam Insulation Kit 200bf

US $308.98

Minneapolis, Minnesota, United States
Jan 30th

Open on mobile:
QR code

Product Info: Please read before you purchase: This is a complete kit with hose, applicator and nozzles! Includes fan and conical spray tips! The operating temperature for this kit is between 60°F - 80°F for both the ambient (surrounding) temperature and the surface temperature of the material you are applying it to. Failure to use the kit within the recommended operating temperature range may cause your kit to dispense improperly. If stored in a cold climate, you MUST warm the kit to the recommended temperature before using it. Make sure you carefully read the instructions before using this kit. This kit is a HAZARDOUS MATERIAL and will require a signature for delivery - FedEx cannot leave this at your door without being signed for. Please include a daytime telephone number so that you can be contacted regarding any delivery issues. We ship NEW, FRESH kits - typically less than 1-2 months old. If you have any issues with your kit, please contact us by e-mail or call us. You can also get technical support from the mfg at (800)325-6180 or view troubleshooting tips by clicking here. Leaving us negative or neutral feedback stating that you had problems with your kit doesn't help us solve your problem. U2-200 Two Component Foam Kit Portable, disposable and self-contained with color-coded, pre-connected hoses. Yields 200 board feet and provides a quick consistent flow of foam that dries in under a minute. Foam expands 30X. Touch N Seal Foam Kits are designed for use in commercial sealing, insulating, patching, and filling applications. Portable and disposable, these two-component foam systems provide a quick, consistent flow of polyurethane foam that dries in less than one minute. Yields 200 board feet or 200 square feet using a 1" layer (1 board foot = 12" x 12" x 1"), 16.6 cubic feet - this is based on ideal lab conditions, your results may vary based on environmental factors, including the temperature of the surface you are spraying, or the ambient surrounding temperature. We cannot guarantee 100% yield on any kit; for best results, please make sure to carefully follow the application guidelines and temperature guidelines Portable, disposable, self-contained units High closed cell content of cured foam makes it suitable as a general sealant to prevent air leakage in cold storage and other insulating applications Foam expands 30 times, dries in less than 1 minute Fast set-up Upright assembly No CFCs or urea formaldehyde Kits include A & B cylinders, P2 applicator gun with 10 ft hoses, extra spray nozzles, assembly wrench, latex gloves, lubricant and trilingual instructions (English, Spanish, French) Clear, color-coded hoses Includes illustrated instructions 18 Month Shelf Life, Use All Contents Within 30 Days of Initial Dispensing Specifications: Density (ASTM D-1622): 1.75 +/- 0.2 pcf K-Factor (ASTM C-518): 0.14 BTU/in/hr^-1/ft^-1/F^-1 R-Value (ASTM C-518): 7.12 per inch Compressive Strength (ASTM D-1621): 10% parallel: 19 psi, 10% perpendicular: 13.4 psi Tensile Strength (ASTM D-1623): 30 psi Dimensional Stability (ASTM D-2126): -40°F, +.88% volume change; 158°F, 100% RH, 2 Weeks: +14% volume change Water Absorption (ASTM D-2842); 1.0 - 3.5% vol Closed Cell Content (ASTM D-2856): 90% minimum Maximum Service Temperature for Cured Foam: 240°F (116°C)

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Model

200 Standard Foam