Techserve* Perfect Print** 3d Printer Platform Glue Kit

US $29.99

  • Fall River, Massachusetts, United States
  • Jan 30th
Introducing the Techserve* Perfect Print** 3D Printer Platform Glue & Perfect Print** 3D Printer Platform Glue Remover! Do you have a 3D Printer with a glass or smooth acrylic build platform, heated or not heated, that produces poor quality prints due to warping and peeling?  We have the solution! Techserve* Perfect Print** 3D Printer Platform Glue creates a perfect seal between your 3D printing material and your 3D printer's build platform. We have produced a perfect, low-viscosity liquidized adhesive designed specifically for 3d printing platforms. Techserve* Perfect Print** 3D Printer Platform Glue has been rigorously tested to ensure that even small amounts of our adhesive can drastically improve 3D print quality. With spray-on application and a Dimethyl Ketone base, Techserve* Perfect Print** 3D Printer Platform Glue applies easily and cleans up effortlessly! You no longer need to use that useless 3d printer stick glue that shipped with your printer. No more messy application and cleanup with hairspray, thick adhesives or glues. Techserve* Perfect Print** 3D Printer Platform Glue easily cleans off of any smooth surface platform with a soft cloth and a dab of our Perfect Print** 3D Printer Platform Glue Remover! The Techserve* Perfect Print** 3D Printer Kit comes with everything you need to make a perfect, warpless print every time! Whats included in the kit? 1 Plastic Model Spatula. 1 Fine Bristle Brass Nozzle Scrub Brush. 1 Fine Bristle Steel Nozzle Scrub Brush. 1 Platform Scrubbing Bulb. 1 Printer Platform Spray Shield. 1 2oz bottle Techserve* Perfect Print** 3D Printer Platform Glue (refills available). 1 2oz bottle of Techserve* Perfect Print** 3D Printer Platform Glue Remover (refills available). 1 Microfiber 3D Printer Platform Cleaning Cloths. 1 Nozzle Clog Removal Tool. 1 Instruction Manual. 1 Safety Information Pamphlet. 1 Service Response Survey Form -Items in kit may vary slightly in color and design as production changes (*) - Pending Service TM (**) - Pending Product Register Safety Instructions and Warnings! Techserve* Perfect Print** 3D Printer Platform Glue and Glue Remover are highly flammable! Avoid all ignition sources and open flames. Product should be used in accordance with good industrial principles for handling and storing of hazardous chemicals. Avoid vapor inhalation, skin, clothing and eye contact. Do not wear contact lenses when handling this product. Solution and its fumes are irritating to the eyes. Repeated exposure may cause skin dryness or cracking. Vapors may cause drowsiness and dizziness. Ensure good ventilation and local exhaust extraction in working area. The Auto ignition temperature is 465C (869F). User should always wear PPE when applying this product or working with 3D printer materials. (Gloves made from butyl rubber of PTFE/'Teflon', splash-proof goggles or face shield, protective clothing and closed footwear, use appropriate barrier cream to prevent defatting and cracking of skin, etc...) General Safety: IN ALL CASES OF DOUBT OR WHEN SYMPTOMS PERSIST, ALWAYS SEEK MEDICAL ATTENTION Inhalation: Move affected person to fresh air. If recovery is not rapid, seek medical attention. If breathing stops, provide artificial respiration. Attempt to keep the patient warm and at rest. Ingestion: Only when conscious, rinse mouth with plenty of water and give plenty of water to drink - (approx. 500ml). DO NOT INDUCE VOMITING. In case of spontaneous vomiting, be sure that vomit can freely drain because of danger of suffocation. Keep patient at rest and obtain medical attention. Skin Contact: Remove contaminated clothing. Wash affected area with plenty of soap and water. Obtain medical attention. Eye Contact: Rinse immediately with plenty of water for at least 5 minutes while lifting the eye lids. Seek medical attention. Continue to rinse. Prevent contamination of soil, drains and surface water. Spillage Cleanup: Accidental release measures - avoid ignition sources. Take-up spillage with absorbent, inert material and place in a suitable and closable labelled container for recovery or disposal. Wash the area clean with water and detergent, observing environmental requirements. Absorb small quantities with paper towels or other inert material and allow solution to evaporate in safe place (fume hood/cupboard). Storage Precautions: Avoid direct sunlight. Store in a cool, dry, well ventilated place, in securely closed original container. Stability: Stable under normal conditions of use. Conditions to Avoid: Avoid contact with: Strong oxidizing agents. Avoid contact with acids. Avoid heat, flames and other sources of ignition. Materials to Avoid: Potassium Sulphate, Sodium Hydroxide, Sulphuric Acid, Nitric Acid, Hydrogen Peroxide, Chloroform, Activated Carbon, Bromine. Hazardous Decomposition Products: Thermal decomposition or burning may release oxides of carbon and other hazardous gases or vapors.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand TechServe
MPN TSPP-PGK2W
Model Perfect Print** Glue Kit
Country/Region of Manufacture United States

Directions

Similar products from Other Printing Gear

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies