Sweed 5503 Ac Xhd Scrap Chopper

US $7600

Grand Rapids, Michigan, United States
Jun 9th

Open on mobile:
QR code

Comes with a removable C shaped wrap around platform in back and a A-FRAME spool holder in front that lets you place a large spool in front of this machine and let it run. We have ran 2 steel and one hard copper 8 gauge through this machine for days at a time. Comes with extra blades and runs as good as the operator running it. We have gone to a much larger system and just will not us this anymore. We have chopped copper, steel and aluminum wire that comes out 1" to 4" long. Once you learn this machine it is quite easy. We have built the platform around this that is on rollers to move it up around and out away from the machine to empty the cut materials easy. The machine, C platform on rollers (91" X 104") and A-frame all goes with this sale. The machine does bolt to the A-frame platform if you wanted to remove it and use a different way to feed this machine. This is LOCAL PICKUP ONLY. You will have to set up your own trucking. We will load this onto your trucking service. We have the equipment to load this onto a trailer without a problem. Here is what SWEED MACHINERY says: The Model 5503 XHD Scrap Chopper was designed to meet the needs of operations that generate large volumes of wider scrap metal, plastic, and fiberglass. This unit has the same quality features offered on other Sweed Scrap Choppers: a fast efficient feed rate; an air cylinder-actuated feedworks with safety-detent foot switch; and heavy steel plate construction. The 5503 Series line of Choppers is designed to accommodate higher volume applications for years without serious maintenance. Performance Data Electric Motor Power: 10 HP Infeed Motor Power: 3 HP Infeed Speed: 90 fpm Cut Length: 3 3/4" Infeed Opening: 6 5/8" X 1 5/8" 3-Phase 230/460 Volt-60Hz Weight: 3375 lbs. Material Reference Steel Banding with Clips High Tensile Bale Wire Solid Alum or Copper Bar ACSR (Aluminum Cable Steel-Reinforced) Slitter Trim Tube and Pipe OD and ID Tube Scrap Construction Features Footswitch controlled feedworks release Infeed funnel with "Anti-Kickback" flap Knives can be rotated (4 times) for extended life Lincoln TEFC motor We have a lot more into this than what we are asking so here is your chance to get a great deal. **MAKE A OFFER & WIN**...