* Shipping Is Free * Iscar Wnmg 432-pp Ic 907 ( Wnmg 080408-pp ) 50pcs

US $375.00

  • Beograd, Serbia
  • Feb 25th
 ISCAR WNMG  080408-PP IC 907 50pcs ISO-Turning      Family: WNMG-PP Double-Sided Trigon Inserts for Machining Very Ductile Materials at Medium Cutting Conditions                                         Designation: WNMG 080408-PP           l di S r ft(min) ft(max) ap(min) ap(max)   8.70   12.70   4.76   0.80   0.14   0.30   1.00   4.00 Grade : IC907 A tough sub-micron substrate, TiAlN PVD coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel. Property Value ISO Range - P/M/K (P10-P30)(M05-M20) ISO Range - H/S/N (H05-H15)(S05-S20) TRS 560 HRA 92.80 Grade or Coating Type PVD Coating Layers TiAlN+TiN Cutting Speed: WNMG 080408-PP                    IC907 ISO Material Material Description Material Condition Cutting Speed Recommendations P 1 Non-alloy steel and cast steel, free cutting steel <0.25%C. Annealed :125 120-200 m/min P 2 Non-alloy steel and cast steel, free cutting steel >=0.25%C. Annealed :190 100-170 m/min P 3 Non-alloy steel and cast steel, free cutting steel <0.55%C. Quench and tempered. :250 80-150 m/min P 4 Non-alloy steel and cast steel, free cutting steel >=0.55%C. Annealed :220 90-160 m/min P 5 Non-alloy steel and cast steel, free cutting steel >=0.55%C. Quenched & tempered. :300 80-130 m/min P 6 Low alloy & cast steel (less than 5% of alloying elements). Annealed :200 80-150 m/min P 7 Low alloy & cast steel (less than 5% of alloying elements). Quenched & tempered :275 70-130 m/min P 8 Low alloy & cast steel (less than 5% of alloying elements). Quenched & tempered :300 60-120 m/min P 9 Low alloy & cast steel (less than 5% of alloying elements). Quenched & tempered :350 50-100 m/min P 10 High alloyed steel, cast steel and tool steel. Annealed :200 80-130 m/min P 11 High alloyed steel, cast steel and tool steel. Quenched & tempered :325 50-100 m/min M 12 Stainless steel and cast steel. Ferritic/martensitic :200 170-265 m/min M 13 Stainless steel and cast steel. Martensitic :240 140-245 m/min M 14 Stainless steel and cast steel. Austenitic :180 100-280 m/min K 15 Grey cast iron (GG) Pearlitic/ferritic :180 30-140 m/min K 16 Grey cast iron (GG) Pearlitic/martensiti :260 30-140 m/min K 17 Nodular cast iron (GGG) Ferritic :160 30-140 m/min K 18 Nodular cast iron (GGG) Pearlitic :250 30-140 m/min K 19 Malleable cast iron. Ferritic :130 30-140 m/min K 20 Malleable cast iron. Pearlitic :230 30-140 m/min S 31 High temp. alloys Fe based. Annealed :200 50-80 m/min S 32 High temp. alloys Fe based. Cured :280 40-65 m/min S 33 High temp. alloys. Ni or Co based. Annealed :250 45-60 m/min S 34 High temp. alloys. Ni or Co based. Cured :350 35-45 m/min S 35 High temp. alloys. Ni or Co based. Castr :320 30-50 m/min S 36 Titanium Ti alloys. :310 100-180 m/min S 37 Titanium Ti alloys. Alpha+beta alloys cu :310 50-55 m/min H 38 Hardened steel. Hardened :560 20-90 m/min H 39 Hardened steel. Hardened :654 30-60 m/min Thank you ! !! BUYERS FROM BRAZIL !! SHIPPING TIME TO BRAZIL IS 50 - 60 DAY ! !! MAYBE MORE !!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand ISCAR
Shape Trigon
Model WNMG 080408-PP
Material Carbide Inserts
MPN TURNING
SOME BOX MAYBE OPENED INSERTS IS NEW NEVER USED
Primary Application(s) High-Temperature Alloy, Non-Ferrous Material, Stainless Steel, Steel
SHIPPING OFFER COMBINE SHIPPING
Coating TiAlN PVD

Directions

Similar products from Carbide Inserts & Face Mills

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies