shaft spindle for sale, brand-new and used.

3/4" ARBOR HOLE - RIGHT HAND SPINDLE 1/2" STRAIGHT SHAFT- 3/4" ARBOR HOLE - THREADED SHAFT SIZE 1/2"

3/4" ARBOR HOLE - LEFT HAND SPINDLE - 1/2" STRAIGHT SHAFT ARBOR HOLE size is 3/4" - THREADED SHAFT SIZE 1/2"-

5/8" L ARBOR HOLE SPINDLE 1/2" STRAIGHT SHAFT 5/8" ARBOR HOLE - SHAFT SIZE 1/2" 3-7/16" LONG - LEFT HAND THREAD

5/8" ARBOR - SPINDLE 1/2" STRAIGHT SHAFT 5/8" ARBOR HOLE - SHAFT SIZE 1/2" -

Click here to request a quote with price on this stock number from Gray

DM-MOTIN

This is a BIG Rambaudi milling spindle head with 50 taper and long shaft that is being sold for parts The spindle spins smoothly and freely without any play but the bearings sound dry to me This is a BIG spindle head! Look at picture #2...

5/8" ARBOR SPINDLE ADAPTER - HOLDER FOR 1/4" SHAFT SIZE MANDRELS MANDREL HOLDER 5/8" ARBOR HOLE - CHUCK ADAPTER for Holding 1/4" Shanks

VAN NORMAN No.12 Milling Machine 17" X travel 6-1/2" Y travel 12-1/8"spindle to table vertical mode 17" spindle to table horizontal mode 8 X 37-1/2 table Spindle taper changed to R-8 (to accommodate tooling from Bridgeport machines) 230-volt single-phase motor (Visible on top in main photo. It has a smaller drive pulley than the original motor.) Serial no. 5128-12 Made in 1937 The Table Vise that may or may not appear in the photos is NOT included.

Up for sale is a very clean recently rebuilt single spindle 1 5/8" capacity Brown and Sharpe #2 Ultramatic. This is the machine you've been trying to find for years! You will be hard pressed to find a better example of these machines than this one.

SPINDLE, GMN Model TSAV 100 du x 290-S 6208 L214703 A7 Taper  Speed rated 11,000 RPM 1-2 Millionths Tolerance Coolant hole through center  ~17 in long with shaft length Spindle diameter~4 in Body~11.5 in Taper shaft length~3 inches Common size spindle adaptable for many uses. See at GMNUSA.com

Offering a quill & spindle for a Rockwell Delta 15" drill press Quill housing is 2" dia and 7" long Spindle shaft extends 6-1/4" beyond quill housing Fits many of the 15" Drills with shorter stroke and .580" dia 6 spline spindle Good condition, good rack teeth Smooth bearings, Jacobs taper is perfect, no scores I checked runout at the taper and it's less than .001"

4 BRAND NEW UNITS AVAILABLE - ONLY ITEMS LOCATED IN USA UPGRADED TO 2.2kw AIR-COOLED SPINDLE Ended up needing a larger surface area for our purposes. Specifications: Working size X,Y,Z 600x900x70mm or longer Command accepted G code,u00,mmg,plt Spindle Motor(optional) 2.2kw,Inverter-driven spindle motor cooled by AIR Working mode: stepper Drive mechanism German imported ballscrew for x,y,z axis XYZ Guide rail X,Y,Z Round shaft Motion positioning accuracy &nb

WE ALWAYS CONSIDER ALL REASONABLE OFFERS AND MANY ARE PROMPTLY ACCEPTED AS WE ARE A SMALL DEALER WITH A VERY LOW OVERHEAD. WE URGE YOU TO "CLICK" ON SELLERS OTHER ITEMS AS WE ALWAYS HAVE 40 - 50 OFFERINGS EACH MONTH. You are invited to purchase or

New Square 3KW Air-cooled Spindle Motor ER20 220V 300Hz For CNC Milling Router

This auction is only for the Quill, Spindle, 1/2" Drill Chuck For A Walker Turner Radial Drill Press.The photo of the drill press is only to show which model it came from.DRILL PRESS NOT INCLUDEDQuill Diameter 1-13/16", The od of the spline shaft is 5/8".The drill chuck has been welded on to the spindle. Please visit our website, lostcreekmachine.com

Offering a spindle drive shaft for a 17" Rockwell Delta drill press Includes bearings & has pulley for power feed drive This is for the later style 17" drill such as 17-600 & 17-400 models with the switch inside the front head casting Any questions: e-mail, lathemill@juno.com, or call 724 882 6449 I have many parts for drill presses, Delta, Clausing, Walker Turner Happy to combine shipping on multi