+ Post new Ad
ROYAL 10692 2MT CARBIDE-TIPPED QUAD- BEARING LIVE CENTR, US $130 – Picture 0
ROYAL 10692 2MT CARBIDE-TIPPED QUAD- BEARING LIVE CENTR, US $130 – Picture 0

Royal 10692 2mt Carbide-tipped Quad- Bearing Live Centr

US $130

  • Duncan, South Carolina, United States
  • Jun 6th
Open on mobile:
QR code
Allows cooler running and less turning resistanceFeatures Three matched angular contact bearings with factory-set preload support the primary load area of the point, and oil fill screw for lubrication. The spindle-like point extends into the shank where it is supported by a needle bearing, substantially increasing rigidity, reducing point deflection and dampening vibration. Included point angle is 60°+15'/-0. ±0.00005" TIR guaranteed. Bearings are protected by a combination steel shield and neoprene seal. Locknut for factory set preload. Bearing life significantly extended with the exclusive Royal Roto-Shield™ . Body is hardened for extra strength, extra rigidity and long life. Lubricated with lightweight spindle oil. Maximum recommended speed:12,000 RPM Low profile head for tool clearance. Product Specifications Product Specifications Weight 1.62000 Brand ROYAL Model # 10692 Taper 2 MT Weight Of Workpiece 180 lbs. Thrust Load 650 lbs. Maximum Rotational Speed 12,000 RPM Point Type Carbide Tipped Head Diameter 1-3/4" Carbide Tip Diameter 3/8" Comp Load Rate 830 lbs. Head Length 1-15/16" Length From End of Morse Taper To Head 2-13/16" Morse Taper 2 Overall Length 6-1/2" Point Angle 60°+15'/-0. Point Length 1-3/4" Tip Diameter 7/8" TIR Repeatability ±0.00005" Country of Origin UNITED STATES OF AMERICA Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution for Online Merchants

Directions

Similar products from Boring Chucks

Aloris CA-22 CRT-30 CC-30 Universal Turning Boring Quick Change Tool Post Holder

Aloris CA-22 CRT-30 CC-30 Universal Turning Boring Quick Change Tool Post Holder

  • Cornell, Illinois, United States
  • Jun 7th
MACHINIST TOOL JACOBS 18N SUPER DRILL CHUCK 1/8"-3/4" CAP. NO KEY 4

MACHINIST TOOL JACOBS 18N SUPER DRILL CHUCK 1/8"-3/4" CAP. NO KEY 4

  • Atlanta, Georgia, United States
  • Jun 7th
Cushman 1/2" Capacity Drill Chuck Morse Taper #2 Shank MT2 2MT Japan

Cushman 1/2" Capacity Drill Chuck Morse Taper #2 Shank MT2 2MT Japan

  • Lorain, Ohio, United States
  • Jun 7th
6pc Lot Pneumatic Aircraft 3/32" Drill Bit Collet Model #41 Mount 1/4"-28 Set

6pc Lot Pneumatic Aircraft 3/32" Drill Bit Collet Model #41 Mount 1/4"-28 Set

  • Romulus, Michigan, United States
  • Jun 7th
6A 33 Taper Jacobs Chuck

6A 33 Taper Jacobs Chuck

  • DeKalb, IL, United States
  • Jun 7th
USA Original 14N JACOBS Super Ball Bearing Replacement Drill Chuck Sleeve S14N

USA Original 14N JACOBS Super Ball Bearing Replacement Drill Chuck Sleeve S14N

  • Romulus, Michigan, United States
  • Jun 7th
ALBRECHT 70300 1/32'- 1/2' 6JT KEYLESS DRILL CHUCK

ALBRECHT 70300 1/32'- 1/2' 6JT KEYLESS DRILL CHUCK

  • Duncan, South Carolina, United States
  • Jun 6th
ALBRECHT 70290 1/32'- 1/2' 33JT KEYLESS DRILL CHUCK

ALBRECHT 70290 1/32'- 1/2' 33JT KEYLESS DRILL CHUCK

  • Duncan, South Carolina, United States
  • Jun 6th
ROHM 475385 Precision Short Drill Chuck

ROHM 475385 Precision Short Drill Chuck

  • Duncan, South Carolina, United States
  • Jun 6th
3MT CARBIDE-TIPPED QUAD- BEARING LIVE CENTR

3MT CARBIDE-TIPPED QUAD- BEARING LIVE CENTR

  • Duncan, South Carolina, United States
  • Jun 6th
ROYAL 10522 Spring Type Live Center-Overall Length:3-15/16'

ROYAL 10522 Spring Type Live Center-Overall Length:3-15/16'

  • Duncan, South Carolina, United States
  • Jun 6th
ROYAL 10524 Spring Type Live Center-Overall Length:5-15/16'

ROYAL 10524 Spring Type Live Center-Overall Length:5-15/16'

  • Duncan, South Carolina, United States
  • Jun 6th
ROYAL 10525 Spring Type Live Center-Overall Length:8-1/16'

ROYAL 10525 Spring Type Live Center-Overall Length:8-1/16'

  • Duncan, South Carolina, United States
  • Jun 6th
DAREX LEX450 Auto Attachment with 1 Geared (12-21mm) Chuck

DAREX LEX450 Auto Attachment with 1 Geared (12-21mm) Chuck

  • Duncan, South Carolina, United States
  • Jun 6th
SPG 76-M-1580-P Replacement Drill Chuck, 1/16' ~ 13/16'

SPG 76-M-1580-P Replacement Drill Chuck, 1/16' ~ 13/16'

  • Duncan, South Carolina, United States
  • Jun 6th
Chuck Conversion Kit | 3/8" Converter for Impact Driver 1/2 Quick Change Adapter

Chuck Conversion Kit | 3/8" Converter for Impact Driver 1/2 Quick Change Adapter

  • Gardena, California, United States
  • Jun 6th
ALBRECHT 1/32-1/2 KEYLESS CHUCK 1-13

ALBRECHT 1/32-1/2 KEYLESS CHUCK 1-13

  • Eldred, Pennsylvania, United States
  • Jun 6th
USA Original JACOBS Replacement Drill Chuck Sleeve S32 N0.32 Mds 32,32B,33,33B

USA Original JACOBS Replacement Drill Chuck Sleeve S32 N0.32 Mds 32,32B,33,33B

  • Bethlehem, Pennsylvania, United States
  • Jun 6th
Jacobs Model 30B 1/2-20 Chuck

Jacobs Model 30B 1/2-20 Chuck

  • Clarendon Hills, Illinois, United States
  • Jun 6th
NEW HEAVY DUTY Drill Chuck 5/8" MT1 - Morse Taper - Press NEW

NEW HEAVY DUTY Drill Chuck 5/8" MT1 - Morse Taper - Press NEW

  • Seattle, Washington, United States
  • Jun 6th

People who viewed this item also vieved

Dremel 407 Drum Sander Wood Fiberglass Curves Metal Rubber

Dremel 407 Drum Sander Wood Fiberglass Curves Metal Rubber

  • Indianapolis, Indiana, United States
  • Jan 30th
New Flowserve 163972 4220437000 Seal Kit

New Flowserve 163972 4220437000 Seal Kit

  • Leopolis, Wisconsin, United States
  • Jan 30th
SDQC 12X150L 107.5 Degree Internal Boring Bar Turning Tool For Indexable insert

SDQC 12X150L 107.5 Degree Internal Boring Bar Turning Tool For Indexable insert

  • ???, ???, China
  • Jan 30th
Sandvik C10S-SCLCR-2C Solid Carbide Boring Bar 5/8"x10"[1only]

Sandvik C10S-SCLCR-2C Solid Carbide Boring Bar 5/8"x10"[1only]

  • Surrey, British Columbia, Canada
  • Jan 30th
Nikken CAT 50 Taper 1" End Mill Holder, # CAT50-WE1-105U, Used, WARRANTY

Nikken CAT 50 Taper 1" End Mill Holder, # CAT50-WE1-105U, Used, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jan 30th
BT50 JT4 JACOBS TAPER ARBOR

BT50 JT4 JACOBS TAPER ARBOR

  • Grand Rapids, Michigan, United States
  • Jan 30th
Dodge 119628, Finished Bore with Keyway Taper Locking Bushing

Dodge 119628, Finished Bore with Keyway Taper Locking Bushing

  • Atlanta, Georgia, United States
  • Jan 30th
LOT 2 NEW MARTIN 2012 3/4 TAPERED BUSHING 3/4IN D246341

LOT 2 NEW MARTIN 2012 3/4 TAPERED BUSHING 3/4IN D246341

  • Delta, Ohio, United States
  • Jan 30th
JACOBS USA 14N BALL BEARING SUPER CHUCK W/ CAT 40 ADAPTER & KEY STOCK #A49

JACOBS USA 14N BALL BEARING SUPER CHUCK W/ CAT 40 ADAPTER & KEY STOCK #A49

  • Cleveland, Ohio, United States
  • Jan 30th
NEW CAT40 PULL STUD RETENTION KNOB/RETENTION STUD [COOLANT THROUGH]

NEW CAT40 PULL STUD RETENTION KNOB/RETENTION STUD [COOLANT THROUGH]

  • Santa Clara, California, United States
  • Jan 30th
NEW 15 PC 3/4" SHANK CARBIDE INDEXABLE CUT-OFF TOOL SYSTEM SET KIT

NEW 15 PC 3/4" SHANK CARBIDE INDEXABLE CUT-OFF TOOL SYSTEM SET KIT

  • Huntington Beach, California, United States
  • Jan 30th
Aluminum Cut Carbide Cylinder Bur 3/4" x 1" x 1/4" SA-7NF BUR 19020

Aluminum Cut Carbide Cylinder Bur 3/4" x 1" x 1/4" SA-7NF BUR 19020

  • Rialto, California, United States
  • Jan 30th
NOS Jergens 42105 Black Oxide T Bolts 3/8-16 x 3-3/4" Lot of 12 USA MADE

NOS Jergens 42105 Black Oxide T Bolts 3/8-16 x 3-3/4" Lot of 12 USA MADE

  • Denver, Colorado, United States
  • Jan 30th
NOS Jergens 42102 Black Oxide T Bolts 3/8-16 x 2-1/4" Lot of 10 USA MADE

NOS Jergens 42102 Black Oxide T Bolts 3/8-16 x 2-1/4" Lot of 10 USA MADE

  • Denver, Colorado, United States
  • Jan 30th
Floating tool holders Ziegler $125 each

Floating tool holders Ziegler $125 each

  • Clearwater, Florida, United States
  • Feb 23rd
Tool post Dorian axa sd25axa

Tool post Dorian axa sd25axa

  • Clearwater, Florida, United States
  • Feb 23rd
Motor Shaft Arbor Extension Grinder Polish Buffer 1/2

Motor Shaft Arbor Extension Grinder Polish Buffer 1/2" New- show original title

  • United States
  • May 6th
BRIDGEPORT CNC MILLING SPINDLE- show original title

BRIDGEPORT CNC MILLING SPINDLE- show original title

  • Oxford, Connecticut, United States
  • May 7th
K6-245CS G76X SUNNEN HONE MANDREL WITH ADAPTER .245" - .250"

K6-245CS G76X SUNNEN HONE MANDREL WITH ADAPTER .245" - .250"

  • Cleveland, Ohio, United States
  • May 19th
Kl 962 sunnen mandrel

Kl 962 sunnen mandrel

  • Scarborough Ontario , Canada
  • May 19th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies