RFID UART module card 13.56 Mhz. Read/Write. RC522.Mifare tags with 1 Kb EEPROM, US $25.00 – Picture 0

RFID UART module card 13.56 Mhz. Read/Write. RC522.Mifare tags with 1 Kb EEPROM, US $25.00 – Picture 1

RFID UART module card 13.56 Mhz. Read/Write. RC522.Mifare tags with 1 Kb EEPROM, US $25.00 – Picture 2

RFID UART module card 13.56 Mhz. Read/Write. RC522.Mifare tags with 1 Kb EEPROM, US $25.00 – Picture 3

RFID UART module card 13.56 Mhz. Read/Write. RC522.Mifare tags with 1 Kb EEPROM, US $25.00 – Picture 4

RFID UART module card 13.56 Mhz. Read/Write. RC522.Mifare tags with 1 Kb EEPROM, US $25.00 – Picture 5

RFID UART module card 13.56 Mhz. Read/Write. RC522.Mifare tags with 1 Kb EEPROM, US $25.00 – Picture 6

RFID UART module card 13.56 Mhz. Read/Write. RC522.Mifare tags with 1 Kb EEPROM, US $25.00 – Picture 7

RFID UART module card 13.56 Mhz. Read/Write. RC522.Mifare tags with 1 Kb EEPROM, US $25.00 – Picture 8

Rfid Uart Module Card 13.56 Mhz. Read/write. Rc522.mifare Tags With 1 Kb Eeprom

US $25.00

Mexico, D.F., Mexico
Jan 29th

Open on mobile:
QR code

The package contains the RFID-UART module, a card tag, a keychain tag, and 4 Dupont cables. The item is new, and payment is through PayPal. The cost of shipping is free. We ship worldwide via standard international shipping with a delivery time of 9 to 17 business days for the U.S. and Canada and 14 to 22 business days for the rest of the world. The RFID-UART module has a model of read-write data and is based on NXP Semiconductors chip RC522 and a special processor STC12C5A16S2. The approximate detection distance is 5 cm. Operating frequency is 13.56 Mhz with a 4 pin header connector for the TTL level signal TX and RX. Maximum current is 40 ma with a 5-volt voltage. It is compatible with a variety of tags, including Mifare MF1S503 with 1 Kb EEPROM. The size of the card is 40 x 50 mm, and its operating temperature is -20 to +60 degrees Celsius. This card is easy to operate and may be connected to any microcontroller with a standard UART TTL interface. The card can also manage serial information through bit banging firmware. Commands are simple to use, like requesting the Mifare tag's serial number by just sending the command '01' through the serial port. And, it operates with a voltage of 5v, so no external voltage regulator is needed. The RFID-UART has read/write capability of the EEPROM in the tags, with applications ranging from public transport, access control, attendance control to electronic wallet systems. The RFID-UART module is a versatile RFID system operating at 13.56 Mhz. This card is based on the RC522 circuit and is equipped with a special processor to manage UART functions. The kit includes the RFID-UART module, 2 Mifare tags, and 4 Dupont cables. The tags must be brought within 5 cm of the device to activate the RFID functions. A complete development project is available for the PIC 18F2550 microcontroller system. The microcontroller can read and write RFID Mifare tags and has a Bluetooth interface. The data can also be visualized on a mobile phone or a Windows PC using Hyperterminal at 9600 bps. The user may also observe the tag's serial number on the LCD port of the microcontroller board.

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Model

RFID-UART