QMARK Cabinet Unit Heater CUS900 Series 5000 watt 208V, US $850.00 – Picture 0

QMARK Cabinet Unit Heater CUS900 Series 5000 watt 208V, US $850.00 – Picture 1

QMARK Cabinet Unit Heater CUS900 Series 5000 watt 208V, US $850.00 – Picture 2

QMARK Cabinet Unit Heater CUS900 Series 5000 watt 208V, US $850.00 – Picture 3

Qmark Cabinet Unit Heater Cus900 Series 5000 Watt 208v

US $850.00

Bellingham, Washington, United States
Jan 29th

Open on mobile:
QR code

Qmark CUS93505203FF Cabinet Unit Heaters: 208v/ 1ph or 208v / 3ph • Commercial voltage only • Field convertible to single phase - factory field convertible 208v/3 phase to 208v / 1 phase • All 3 phase heaters have a balanced heating load. • Built-in 24 volt thermostat and transformer supplied standard, field convertible to 24 volt wall thermostat. • Throwaway inlet air filter supplied standard. • High / Low heat settings and two speed fan. • Interchangeable intake & discharge louvers - Supplied front in-front out, intake can be changed from front to bottom and/or discharge louvers from front to top by removing only two screws. • Universal mounting - The new CUS900 mounts with discharge air in the up flow or down flow directions, or with the heater mounted on its end panel, it delivers heat in the left or right airflow direction or it can be ceiling mounted. • Front Cover Interlock - The heater is shut down if the front cover is opened, providing an additional safety feature for maintenance personnel. • Connect to BAS or EMS - Terminals are provided for direct connection to Building Automation or Energy Management Systems for night or off season control. • Remote fan only switch - Factory supplied with integral switch for continuous fan operation and terminals available for remote switch. • Non fused disconnect- A three pole non-fused disconnect switch disconnects power to the heater. Design prevents entry into the control compartment until disconnect switch is turned to the OFF position. • UL label Unit Dimensions • 35" W • 26 3/8" H • 9 7/8" D Quick Specs for the Qmark CUS93505203FF : • Neutral grey enamel finish • 250 CFM on high speed • 200 CFM on low speed • 120 Lbs • 5,000 watts on High (17,065 BTU's) • 3,300 watts on Low • 208v/ 3ph - hard wired • 14.0 Amps in 3 phase • 208v/ 1ph - hard wired • 25.0 Amps in 1 phase Installation • Wall or ceiling mounted • Keep all furniture or any other blocking material at least 24” away from front of heater. • When draperies are used, hang them so that when in use they are at least 6” above the top of front discharge heater. • Do not use draperies with top discharge heaters. Included • Built-in 24v thermostat and transformer supplied standard, field convertible to 24 volt wall thermostat. • Throwaway inlet air filter supplied standard. • Built-in continuous fan switch Accessories: Optional Trim Kit Recessed Trim Kit: Use for wall or ceiling mounting. Optional Floor / Toe Bae Kit Floor / Toe Base Kit: A kick plate panel for off the floor mounting. This unit is brand new and in the box(only removed to take the pics) but has been sitting in a warehouse for a few years. Buyer has the option to arrange for the shipping of this item. I can strap it to a pallet. I believe the approximate weight of the unit, by itself, is about 107lbs. Thanks for looking

Condition:	New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...	Brand	QMARK
Country/Region of Manufacture	United States
Model	CUS93505203FF