+ Post new Ad
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 0
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 1
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 2
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 3
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 4
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 5
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 6
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 7
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 0
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 1
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 2
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 3
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 4
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 5
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 6
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20)), US $37.60 – Picture 7

Ptd 47/64" S&d Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#d20))

US $37.60

  • Green Bay, Wisconsin, United States
  • Jan 30th
Open on mobile:
QR code
SpecsSilver & Deming and Reduced Shank Drill Bits; Series/List: R57; Shank Diameter (Inch): 1/2; Drill Bit Size (Decimal Inch): 0.7344; Drill Bit Size (Inch): 47/64; Drill Bit Material: High Speed Steel; Drill Bit Finish/Coating: Bright Series/List R57 Shank Diameter (Inch) 1/2 Drill Bit Size (Decimal Inch) 0.7344 Drill Bit Size (Inch) 47/64 Drill Bit Material High Speed Steel Drill Bit Finish/Coating Bright Shank Type Round with Flats Flute Length (Inch) 3 Drill Point Angle 118 Cutting Direction Right Hand Overall Length (Inch) 6 Specification Designation ANSI Point Type Standard Flute Type Spiral Spiral Type Regular Spiral Number of Flats 3 Through Coolant (Yes/No) No
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Precision
Country/Region of Manufacture Brazil
Model 091547
UPC 086071915474

Directions

Similar products from Other Drilling Tools

5 Precision Twist Drill 3.5mm Solid Carbide Drills 5-3/8" OA 2-3/4" Flute (1)

5 Precision Twist Drill 3.5mm Solid Carbide Drills 5-3/8" OA 2-3/4" Flute (1)

  • Glasgow, Kentucky, United States
  • Jan 30th
CARBIDE TIPPED DIE DRILL 5/16 DURAPOINT #00669 USA (QTY 4) #2621A

CARBIDE TIPPED DIE DRILL 5/16 DURAPOINT #00669 USA (QTY 4) #2621A

  • Resaca, Georgia, United States
  • Jan 30th
5 SGS SER 101M Slow Spiral Drill 2.3MM DIN 338 Uncoated 2FL NEW

5 SGS SER 101M Slow Spiral Drill 2.3MM DIN 338 Uncoated 2FL NEW

  • Knoxville, Tennessee, United States
  • Jan 30th
Reground Subland 1/4" X 13/32" Body Step Drill, MSC #01603166

Reground Subland 1/4" X 13/32" Body Step Drill, MSC #01603166

  • Abingdon, Maryland, United States
  • Jan 30th
Allied Machine Spade Drill Insert 17.5mm (150T-17.5FB)

Allied Machine Spade Drill Insert 17.5mm (150T-17.5FB)

  • Fort Worth, Texas, United States
  • Jan 30th
New! Sandvik Coromant .6719" thru-coolant drill, RA411.5-4434

New! Sandvik Coromant .6719" thru-coolant drill, RA411.5-4434

  • Watertown, New York, United States
  • Jan 30th
1/2" 82 DEGREE HSS SINGLE FLUTE COUNTERSINK

1/2" 82 DEGREE HSS SINGLE FLUTE COUNTERSINK

  • Hamilton, Virginia, United States
  • Jan 30th
Kennametal 21mm, .8268" flat bottom, solid carbide, thru-coolant drill

Kennametal 21mm, .8268" flat bottom, solid carbide, thru-coolant drill

  • Watertown, New York, United States
  • Jan 30th
NEW SANDVIK INDEXABLE DRILL WITH INSERTS R416.2-1000 P31-41 STK 1121

NEW SANDVIK INDEXABLE DRILL WITH INSERTS R416.2-1000 P31-41 STK 1121

  • Wadley, Alabama, United States
  • Jan 30th
lot of 3 PTD 13/16" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D9))

lot of 3 PTD 13/16" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D9))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 23/32" S&D Reduced Shank Drill Bit R57 Shank Diameter (Inch): 1/2 ((#D6))

PTD 23/32" S&D Reduced Shank Drill Bit R57 Shank Diameter (Inch): 1/2 ((#D6))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 55/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D12))

PTD 55/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D12))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 27/32" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D14))

PTD 27/32" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D14))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 49/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D18))

PTD 49/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D18))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 19/32" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D13))

PTD 19/32" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D13))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 57/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D7))

PTD 57/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D7))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 13/16" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D8))

PTD 13/16" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D8))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19))

PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 7/8" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D17))

PTD 7/8" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D17))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 45/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D10))

PTD 45/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D10))

  • Green Bay, Wisconsin, United States
  • Jan 30th

People who viewed this item also vieved

NY TWIST 3/16 X 12"OAL PILOT DRILL 12PCS (W33-12)

NY TWIST 3/16 X 12"OAL PILOT DRILL 12PCS (W33-12)

  • Miami, Florida, United States
  • Feb 17th
5/16 COBALT RIVET KNOCKOUT DRILL 6PCS (W617-6)

5/16 COBALT RIVET KNOCKOUT DRILL 6PCS (W617-6)

  • Miami, Florida, United States
  • Feb 17th
3/16 A/C ROUTER BITS 12PCS (W165-12)

3/16 A/C ROUTER BITS 12PCS (W165-12)

  • Miami, Florida, United States
  • Feb 17th
9 KAISER CARBIDE CUTOFF INSERTS DG150BD STK2096

9 KAISER CARBIDE CUTOFF INSERTS DG150BD STK2096

  • Wadley, Alabama, United States
  • Feb 22nd
9 SUMITOMO CARBIDE INSERTS VNMG 332 EFP T130Z STK2095

9 SUMITOMO CARBIDE INSERTS VNMG 332 EFP T130Z STK2095

  • Wadley, Alabama, United States
  • Feb 22nd
7 INGERSOLL CARBIDE INSERTS WCET 120304N-DK IN2005 STK2094

7 INGERSOLL CARBIDE INSERTS WCET 120304N-DK IN2005 STK2094

  • Wadley, Alabama, United States
  • Feb 22nd
USED LSI USA 1-29/64" TAPER SHANK TWIST DRILL 1.453" #4MT HSS

USED LSI USA 1-29/64" TAPER SHANK TWIST DRILL 1.453" #4MT HSS

  • Fairfield, Iowa, United States
  • Feb 25th
USED 1-29/64" EXTENDED LENGTH TAPER SHANK TWIST DRILL 1.453" #4MT HSS

USED 1-29/64" EXTENDED LENGTH TAPER SHANK TWIST DRILL 1.453" #4MT HSS

  • Fairfield, Iowa, United States
  • Feb 25th
1-15/32" Drill Bit 4MT, 4 Morse Taper 14" OAL Unbranded ((#D223))

1-15/32" Drill Bit 4MT, 4 Morse Taper 14" OAL Unbranded ((#D223))

  • Green Bay, Wisconsin, United States
  • Feb 25th
MITSUBISHI Carbide Coolant Drill 0.3594" 23/64" 140 Deg MZS03954MB VP15TF [1985]

MITSUBISHI Carbide Coolant Drill 0.3594" 23/64" 140 Deg MZS03954MB VP15TF [1985]

  • Saint Louis, Missouri, United States
  • Feb 26th
MITSUBISHI Carbide Coolant Drill 5.6mm 0.2205" 140 Deg MZS0560LB VP15TF [1985]

MITSUBISHI Carbide Coolant Drill 5.6mm 0.2205" 140 Deg MZS0560LB VP15TF [1985]

  • Saint Louis, Missouri, United States
  • Feb 26th
MITSUBISHI Carbide Coolant Drill 0.0635" #52 140 Deg MZS00635LB VP15TF [1985]

MITSUBISHI Carbide Coolant Drill 0.0635" #52 140 Deg MZS00635LB VP15TF [1985]

  • Saint Louis, Missouri, United States
  • Feb 26th
CLE-LINE 1" HSS DRILL BIT 1/2" ROUND SHANK S&D BLACK OXIDE 6" LONG C20757 NEW

CLE-LINE 1" HSS DRILL BIT 1/2" ROUND SHANK S&D BLACK OXIDE 6" LONG C20757 NEW

  • Westerville, Ohio, United States
  • Mar 6th
Lot of 6 KFD SIZE X HSS Black & Gold Killer Force Jobber Length Drill Bits KFD

Lot of 6 KFD SIZE X HSS Black & Gold Killer Force Jobber Length Drill Bits KFD

  • White Lake, Michigan, United States
  • Mar 6th
Lot of 6 KFD SIZE W HSS Black & Gold Killer Force Jobber Length Drill Bits KFD

Lot of 6 KFD SIZE W HSS Black & Gold Killer Force Jobber Length Drill Bits KFD

  • White Lake, Michigan, United States
  • Mar 6th
59/64" Heavy Duty Cobalt 135° Notched Point Stub Length Drill USA #600C-59/64

59/64" Heavy Duty Cobalt 135° Notched Point Stub Length Drill USA #600C-59/64

  • Seminole, Florida, United States
  • Apr 22nd
"MD" Twist Drill Bits lot of 3 Pcs 3/16" Screw Machine Type

"MD" Twist Drill Bits lot of 3 Pcs 3/16" Screw Machine Type

  • Coventry, Rhode Island, United States
  • Apr 23rd
OSG 220-5000 Solid Carbide Drill,Brand New,1/2", .500", 118 Deg

OSG 220-5000 Solid Carbide Drill,Brand New,1/2", .500", 118 Deg

  • Saint Clair Shores, Michigan, United States
  • Apr 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies