Precision Dividing Head- 6"

US $895.00

  • Duluth, Georgia, United States
  • Jan 30th
The diameter of the short taper of the spindle nose for mounting flange is 2.1251 inches, and the package comes with two index plates with varying hole numbers. It has a changing gear module of 2 with teeth numbers ranging from 25 to 100. The maximum loading capacity of the Precision Dividing Head- 6" is 286lbs with a net weight of the same number and a shipping weight of 328lbs. Its package dimensions are 28 x 21 x 14 inches. In summary, the Precision Dividing Head- 6" and F11 Series Universal Dividing Head are highly capable machines for various indexing and milling needs. The F11 Series Universal Dividing Head has an adjustable spindle angle from 5 degrees below horizontal to 95 degrees above horizontal. It has various indexing options such as direct indexing, angular indexing, simple indexing, and differential indexing. It is also capable of helical milling by driving a milling machine lead screw with gears from the output shaft of the dividing head. The Precision Dividing Head- 6" with item number 317-0006 is only available for shipping by truck. Its specifications include a center height of 6.29 inches or 160mm and a swivel angle of the spindle of less than 95 degrees in the upward position and less than 5 degrees in the downward position. Additionally, it has a rotating angle of the spindle of 9 degrees for every complete revolution of the diving handle and a minimum reading of vernier of 10 inches. The worm gear ratio is 1:40, and the taper of the spindle bore is MT4 while the width of the locating key is 0.7086 inches. The system of the F11 Series Universal Dividing Head includes a dividing head with a 40:1 ratio of index crank turns to spindle turns, angle graduations on the spindle ring, index plate mounting ring with angular graduations, two index plates with standard Cincinnati hole patterns, and 12 gears for differential indexing or helical milling. It also includes a tailstock, steady rest, spindle adapter for differential indexing, lathe dog clamp, Morse taper dead center, 3 jaw chuck with backing plate, 4 slot faceplate, 5 gear studs, 2 gear and stud brackets, keyed sleeve for gear attachment to a milling machine table lead screw, and wooden shipping crate suitable for storage.

Directions

Similar products from Rotating Tables

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies