+ Post new Ad
PRATT & WHITNEY HORIZONTAL 12" TILTING ROTARY TABLE - 1-1/8" THRU HOLE, 15" HT, US $8600 – Picture 0
PRATT & WHITNEY HORIZONTAL 12" TILTING ROTARY TABLE - 1-1/8" THRU HOLE, 15" HT, US $8600 – Picture 0

Pratt & Whitney Horizontal 12" Tilting Rotary Table - 1-1/8" Thru Hole, 15" Ht

US $8600

  • Chino, California, United States
  • Jun 6th
Open on mobile:
QR code
We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! GF Make: Pratt & Whitney Co. Serial #: 111 Part #: 63978 Condition: Good Specifications: Table Diameter: 12" Thru Hole: 1-1/8" T-Slots (approx.): (10) 7/16" x 3/4" 360 Degree precision adjustment Overall Dimensions (LxWxH): 27" x 23" x 15"   Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full, every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on All Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction. Notice!! After purchasing and collecting your item, we would appreciate your feedback. If you could please leave a 5 star rating in all four of the applicable categories, it would be greatly appreciated. If you have any problems or issues, please contact us prior to leaving any feedback. We strive to provide the best service we can, and understand that mistakes are made in some cases. In the case of these mistakes, we will do whatever is necessary to rectify the situation. Furthermore, because of issues with past customers, we mark all our items to prevent any dishonest eBayer from trying to exchange our item with their old/non-working item. This type of behavior is unacceptable, and action will be taken against these buyers through eBay's policies by reporting them to eBay immediately. Here at MachineStation, we realize most people are honest, and do not practice techniques mentioned above. By the same token we are committed to provide superior customer service to all. Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Directions

Similar products from Rotating Tables

Tsudakoma 8-3/4" Dia. Twin NC Rotary Table Unit, # RNCV-201R2, Used

Tsudakoma 8-3/4" Dia. Twin NC Rotary Table Unit, # RNCV-201R2, Used

  • Grand Rapids, Michigan, United States
  • Jun 6th
6" precision H1ORIZONTAL & VERTICAL ROTARY TABLE ISO9001 Part#TSL150- NEW

6" precision H1ORIZONTAL & VERTICAL ROTARY TABLE ISO9001 Part#TSL150- NEW

  • Madison Heights, Michigan, United States
  • Jun 6th
EIMELDINGEN 48" ROUND PLATE, 30" ROUND TABLE, 8" T/SLOT, CNC ROTARY TABLE

EIMELDINGEN 48" ROUND PLATE, 30" ROUND TABLE, 8" T/SLOT, CNC ROTARY TABLE

  • Dallas, Texas, United States
  • Jun 6th
TROYKE 10" CNC ROTARY TABLE

TROYKE 10" CNC ROTARY TABLE

  • Santa Paula, California, United States
  • Jun 6th
8" Bison Adjustable Tailstock NEW

8" Bison Adjustable Tailstock NEW

  • Carrollton, Ohio, United States
  • Jun 6th
Haas Servo Control Unit for Brush Drive Rotary Tables

Haas Servo Control Unit for Brush Drive Rotary Tables

  • Minneapolis, Minnesota, United States
  • Jun 6th
HORIZONTAL 20" ROTARY TABLE - 1.75" THRU HOLE, 7.5" HEIGHT

HORIZONTAL 20" ROTARY TABLE - 1.75" THRU HOLE, 7.5" HEIGHT

  • Chino, California, United States
  • Jun 6th
SIP SOCIETE GENEVOISE #2341 HORIZONTAL 23.5" / 600MM ROTARY TABLE - 6.5" HEIGHT

SIP SOCIETE GENEVOISE #2341 HORIZONTAL 23.5" / 600MM ROTARY TABLE - 6.5" HEIGHT

  • Chino, California, United States
  • Jun 6th
HORIZONTAL 16" ROTARY TABLE - 1.5" THRU HOLE, 6" HEIGHT

HORIZONTAL 16" ROTARY TABLE - 1.5" THRU HOLE, 6" HEIGHT

  • Chino, California, United States
  • Jun 6th
K&T KEARNEY & TRECKER HORIZONTAL 24" ROTARY TABLE - 1.5" THRU HOLE, 7" HEIGHT

K&T KEARNEY & TRECKER HORIZONTAL 24" ROTARY TABLE - 1.5" THRU HOLE, 7" HEIGHT

  • Chino, California, United States
  • Jun 6th
Stelron Index Table -1-6P-270-RH-LK-M Used #59919

Stelron Index Table -1-6P-270-RH-LK-M Used #59919

  • Holly, Michigan, United States
  • Jun 6th
6" Super Dex Super Spacer adjustable .0005"

6" Super Dex Super Spacer adjustable .0005"

  • Columbus, Ohio, United States
  • Jun 6th
NEW WITH TAGS! CAMCO 902RDM24H32-132 24 POSITION ROTARY INDEX DRIVE TABLE

NEW WITH TAGS! CAMCO 902RDM24H32-132 24 POSITION ROTARY INDEX DRIVE TABLE

  • Noblesville, Indiana, United States
  • Jun 6th
Rotary table 6" H&V with Adjustable Tailstock

Rotary table 6" H&V with Adjustable Tailstock

  • DELHI, DELHI, India
  • Jun 6th
Vertex, Milling, Semi Universal Dividing Head, New.

Vertex, Milling, Semi Universal Dividing Head, New.

  • Miami, Florida, United States
  • Jun 6th
SUPER 8 INCH ROTARY INDEXING FIXTURE MADE IN TAIWAN (3900-2321)

SUPER 8 INCH ROTARY INDEXING FIXTURE MADE IN TAIWAN (3900-2321)

  • Chino, California, United States
  • Jun 6th
6 INCH HORIZONTAL/VERTICAL ROTARY TABLE MADE IN TAIWAN (3900-2316)

6 INCH HORIZONTAL/VERTICAL ROTARY TABLE MADE IN TAIWAN (3900-2316)

  • Chino, California, United States
  • Jun 6th
HAAS 4th Axis CNC 7.83"Dia. Rotary Table Indexer with 7 Pin Controller 200 mm

HAAS 4th Axis CNC 7.83"Dia. Rotary Table Indexer with 7 Pin Controller 200 mm

  • Santa Clarita, California, United States
  • Jun 6th
MMK TECNARA 12 INCH CNC FOURTH AXIS ROTARY TABLE WITH BIG THROUGH HOLE

MMK TECNARA 12 INCH CNC FOURTH AXIS ROTARY TABLE WITH BIG THROUGH HOLE

  • Fountain Valley, California, United States
  • Jun 6th
HAAS 5C ROTARY TABLE INDEXER MOTOR SUPERIOR ELECTRIC STEPPER GUARANTEED TO WORK

HAAS 5C ROTARY TABLE INDEXER MOTOR SUPERIOR ELECTRIC STEPPER GUARANTEED TO WORK

  • Santa Clarita, California, United States
  • Jun 6th

People who viewed this item also vieved

UNIMAT SL DB Dead Center Pin set Tool Steel - from LatheCity

UNIMAT SL DB Dead Center Pin set Tool Steel - from LatheCity

  • Fargo, North Dakota, United States
  • Jan 30th
Lathe Dead Center

Lathe Dead Center

  • Valley, Washington, United States
  • Jan 30th
SKODA LIVE CENTER MORSE TAPER #5 5 CSN 243324 OAL 9.5" (LOC1236B) TS12

SKODA LIVE CENTER MORSE TAPER #5 5 CSN 243324 OAL 9.5" (LOC1236B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
Threaded M39x4 BackPlate/Adapter 6 Inch Lathe Chuck

Threaded M39x4 BackPlate/Adapter 6 Inch Lathe Chuck

  • Chino, California, United States
  • Jan 30th
4 " 4-Jaw Independent Lathe Chuck-New

4 " 4-Jaw Independent Lathe Chuck-New

  • Chino, California, United States
  • Jan 30th
Walker Ceramax Permanent Magnetic Grinding Chuck, 8" x 18", Fine Pole | USA (61C

Walker Ceramax Permanent Magnetic Grinding Chuck, 8" x 18", Fine Pole | USA (61C

  • Saint Louis, Missouri, United States
  • Jan 30th
used vintage detroit stamping clamp for welding

used vintage detroit stamping clamp for welding

  • Belding, Michigan, United States
  • Jan 30th
milling machine hold down work hold Tietzmann & 3 unknown adjustable mill bars

milling machine hold down work hold Tietzmann & 3 unknown adjustable mill bars

  • Elgin, Illinois, United States
  • Jan 30th
Wilton No. 4404 Drop Forged Steel C-Clamp 4" Opening 4" Throat USA

Wilton No. 4404 Drop Forged Steel C-Clamp 4" Opening 4" Throat USA

  • Carson, California, United States
  • Jan 30th
Valenite TG150 5/8" Machine Tool Collet

Valenite TG150 5/8" Machine Tool Collet

  • Wyoming, Michigan, United States
  • Jan 30th
Erickson TG150 3/4" Machine Tool Collet

Erickson TG150 3/4" Machine Tool Collet

  • Wyoming, Michigan, United States
  • Jan 30th
Hardinge B20 Feed Finger Pads 5/8" Square

Hardinge B20 Feed Finger Pads 5/8" Square

  • Hendersonville, Tennessee, United States
  • Jan 30th
Warner & Swasey 12in Face Plate 1676

Warner & Swasey 12in Face Plate 1676

  • Fort Worth, Texas, United States
  • Jan 30th
SOUTH BEND 2 1/4 ” - 8 FACE PLATE 5.5" DIAMETER

SOUTH BEND 2 1/4 ” - 8 FACE PLATE 5.5" DIAMETER

  • Baltimore, MD, United States
  • Jan 30th
HARDINGE L4 SLIDE PLATE FOR LATHE D-13 TURNING SLIDE

HARDINGE L4 SLIDE PLATE FOR LATHE D-13 TURNING SLIDE

  • Baltimore, MD, United States
  • Jan 30th
MACHINIST TOOL LATHE MILL Huot Drill Cabinet for Machinist Hobby Pocher Sherline

MACHINIST TOOL LATHE MILL Huot Drill Cabinet for Machinist Hobby Pocher Sherline

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Lot of Machinist Mandrels for Work Holding k

MACHINIST TOOLS LATHE MILL Lot of Machinist Mandrels for Work Holding k

  • Morris Plains, New Jersey, United States
  • Jan 30th
20 - 3/16" Kwik-Loc Cleco Fasteners with 8 Kwik-Lok Side Grip Clecos and Pliers

20 - 3/16" Kwik-Loc Cleco Fasteners with 8 Kwik-Lok Side Grip Clecos and Pliers

  • Mineral Wells, Texas, United States
  • Jan 30th
Wilton bullet type swivel vise, 4"

Wilton bullet type swivel vise, 4"

  • Lewisville, Pennsylvania, United States
  • Jan 30th
Ralmike's round stock vise, 10-80 mm diameter capacity

Ralmike's round stock vise, 10-80 mm diameter capacity

  • Lewisville, Pennsylvania, United States
  • Jan 30th
Jet JPS-2A, Pedestal Stand for Bench Grinders

Jet JPS-2A, Pedestal Stand for Bench Grinders

  • Columbus, Ohio, United States
  • Jan 30th
Brown and Sharpe V-Blocks No 750-2 machinist toolmakers tools c29

Brown and Sharpe V-Blocks No 750-2 machinist toolmakers tools c29

  • Reynoldsburg, Ohio, United States
  • Mar 3rd
V-Block V Block punch and die machinist toolmakers tools c27

V-Block V Block punch and die machinist toolmakers tools c27

  • Reynoldsburg, Ohio, United States
  • Mar 3rd
MACHINIST TOOLS LATHE MILL NICE Ground Hardened Specialty V Block for Sherline

MACHINIST TOOLS LATHE MILL NICE Ground Hardened Specialty V Block for Sherline

  • Morris Plains, New Jersey, United States
  • Mar 3rd
5C collet holder fixture w/ 5C 3/8" collet

5C collet holder fixture w/ 5C 3/8" collet

  • Montebello, California, United States
  • Mar 8th
USED QUICK CHANGE NMTB-50 TAPER TG-100 COLLET CHUCK NMTB50 TG100 QC-50

USED QUICK CHANGE NMTB-50 TAPER TG-100 COLLET CHUCK NMTB50 TG100 QC-50

  • Fairfield, Iowa, United States
  • Mar 9th
Harding Sjogren Chuck NO2 - D6

Harding Sjogren Chuck NO2 - D6

  • Demorest, Georgia, United States
  • Mar 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies