==Outback S Lite or Outback S-lite GPS precision guidance Tractor Steering Guidance Light Bar assistant and steering aid== * These are in stock ready for immediate shipment. * Add a level of precision to your operation this season and next season and next season with the Outback S-Lite GPS light bar Guidance System. At a fraction of the cost of competitive light bar GPS Systems, the S-Lite light bar is the affordable solution for your operation. I have used the Outback s-lite or Outback s lite in my operation this past 2 years and it is so portable and functional especially in low light, window glare, darkness. * The Outback S light or S-Lite makes driving a tractor in minimal viability conditions a pleasure instead of an operation shut down because of inability to see where you have been, like a disc, field cultivator or other piece of tillage equipment. * It only takes a few minutes to install. Simply vacuum cup the console to the cab window, connect power and antenna cables, place antenna on the cab, set swath width and select guidance mode. It's the quick and simple. * Utilize the S-Lite for everything from spraying to tillage. And, when you're ready to change to another tractor, combine or sprayer, the S-Lite can be moved in minutes. * Now you can add all of the accuracy and costs savings of precision GPS to your operation. The S-Lite is WAAS enabled with no annual subscription fees. With easy installation and set-up, the savings on inputs start the minute your turn it on. * Complete line of Outback GPS Precision Agriculture equipment and Factory technical support. * Contact us with any questions at 800 283 7107 or 417 682 5551 and to order the equipment to suit your operation. We are friendly and helpful. We have been using the S-lite, S2, S3, 360, Automate, and Baseline RTK starting in 2004 our 6th year. * Washburn Farm & Home is located 2 miles north of Jct 160 & 71 HWY Lamar, Mo 64759 at 172 NE 1ST Ln. on east outer road 71 HWY. * Washburn's is a family owned business started in 1976 our 36th year. We are friendly and helpful and get an English Speaking knowledgeable person on the first call. We have 2 local technicians plus excellent 24 hour factory support for our customers. We have 1 day UPS service from the factory to our store in Lamar, Mo 64759. * Footnotes: OUTBACK,Outback, OUTBACK Guidance, OUTBACK S, OUTBACK S Lite , OUTBACK S2, OUTBACK AutoMate , OUTBACK 360. OUTBACK Steering Guide, OUTBACK Hitch, eDriveTC, Just Let Go are proprietary trademarks of Hemisphere GPS. The OUTBACK S-lite automated navigation and steering guide system is protected under U.S. Patents No. 6,539,303 and No. 6,711,501. The OUTBACK Hitch automated hitch control system is protected under U.S. Patent No. 6,631,916. The OUTBACK eDriveTC GPS assisted steering system is protected under U.S. Patent No. 7,142,956. Other U.S. and international patents pending. FAQ: Outback S-Lite Q. How much memory is in the Outback S-Lite? A: The S-Lite can hold up to 30 hours of stored memory. However, it is recommended to delete each job once you have completed that job in order to keep the time it takes to acquire signal to a minimum. Q. How do I erase the memory on my Outback S-Lite? A: While in a guidance mode, press the Stop Guidance button, press the down arrow two times to and press enter. Q. Does the Outback S-Lite support RTK signal? A: No. Only the Outback S2 and S3 support RTK. Q: How do I set the Outback S-Lite to display ground speed? A: While in a guidance mode, press the down arrow twice to display the ground speed. Q: How long does it take the Outback S-Lite to attain a usable signal? A: It normally takes 1-3 minutes. The GPS signal will be acquired first displaying a yellow light. DGPS correction will then be acquired which illuminates a green light. For e-Dif, it takes 10 minutes to generate corrections. The vehicle can be in motion during this process, but will not be accurate until signals are acquired. If the Outback S-Lite seems to take longer than 1-3 minutes to attain a usable signal, the memory of the console may need to be deleted. Q: Does the Outback S-Lite use straight guidance only? A: No, the user may also use contour guidance. Contour guidance is a mode that allows the user to be guided based upon his/her previous pass. Q: Can I switch from Straight Guidance to Contour during the same job? A: The operator can switch back and forth between straight and contour modes. Since contour guidance follows the previous pass, it will attempt to follow the pass that was recorded in the job no matter if that pass was done in straight or contour mode. Q: Can the Outback S-Lite store a waypoint? A: A waypoint can be stored so the operator can guide back to that specific point. Its used primarily when a job is paused. For example, when stopping to refuel, the operator will pause the job, save the point, and return back to that point to resume. This can be done by pressing the button and using the RTRN PREV PT functions. Q: What electrical power do I need for the Outback S-Lite? A: A standard DC power supply between 9 and 16 volts is required. Current is less than 0.5 Amperes at 12 VDC. The unit will not be damaged by reverse polarity (positive to negative), but it will not operate. FYI: If your cigarette lighter is not available, connect to alternate power source. See your S-Lite guide for further instructions. Connection to an inline 5 amp fuse is required.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
