od id grinder for sale, brand-new and used.

10x20 landis OD and ID grinder with 5 c collet nose with auto in feed and table good condition call for details 220/440 volt 3 phase 818-355-2974

This is a complete set of the wheels to build your own 2” x 48” or 2” x 72” belt knife grinder. This listing includes: One - 4” drive wheel with a bore sized for a 5/8" (.625”) drive shaft with a 3/16” keyway. It is also broached to use with keyed shaft or can be used with a smooth shaft with a flat ground on it for the set screw.

Up for sale is our Landis 10" X 24" Type CH Universal OD/ID grinder w/swing down ID spindle, internal grinding spindle was just recently rebuilt w/new Barden precision bearings, machine is currently under power and is used on a regular basis but it does have a hydraulic spool valve for the table traverse that is leaking. Machine is still fully functional and grinds good. It does not leak hydraulic fluid on the floor, just back into the sump.

For sale, this Studer S40-12 CNC O.D.-I.D. Universal grinder, serial number 2101.11, manufactured in 1984, made in Switzerland. Some of the technical data for this Studer S40-12 grinder are as follows, Center height= 4.9/6.9" 125/175mm Center distance= 25.6/39.4" 650/1000mm Grinding length= 25.6/39.4" 650/1000mm Wheelhead slide range= 45 degrees Workhead swivel range= 0-90 degrees

UNIVERSAL CUTTER GRINDER SHARPENER MACHINE MR-20A NEGATIVE ANGLE 0 - 52 DEGREE

Knife Making:12" x 2" a True Rubber Belt Sander Contact Wheel with 5/8" ID Ball Bearings and Shaft. New, from old factory liquidation.

10" diameter wheel is good; 12" is better but 14" is The Best and a must for hollow grinding! Knife Making: 14" x 2" a True Rubber Belt Sander Contact Wheel with 3/4"

Knife Making: 14" x 2" a True Rubber Belt Sander Contact Wheel with 3/4" ID Bearings.

2 used grinder spindle wrenches (2) Sopko 35135 and (1) Boyar Schultz 3325 please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

This unit came from a community college in Upstate NY. I t was sitting for a long time in their machine shop. All parts move free and appears to be in usable condition.

Landis OD/ID Grinder converted to St. Mary’s type OD Grinder. The modifications were done here at Wire Cut Co.

Brass Washers for size #32 meat grinders THREE Brass washers for meat grinder augers. This is made for Hobart, Biro, Berkel, Cabelas, Universal, and many other commercial grade meat grinder augers. Will fit your auger if it has the 3/4" square end.

THREE Fiber washers for meat grinder augers. This is made for Hobart, Biro, Berkel, Cabelas, Universal, and all commercial grade meat grinder augers. Will fit your auger if it has the 3/4" square end.

Knife Making:12" x 2" a True Rubber Belt Sander Contact Wheel with 5/8" ID Ball Bearings

THREE Fiber washers for #12 size meat grinders. This is compatible with Hobart, Biro, Berkel, Chop Rite, Alfa, Uniworld, Universal and all commercial grade meat grinder augers that look as pictured. Will fit your auger if it has 1/2" square end.

THREE Fiber washers for meat grinder augers. This is made for Hobart, Biro, Berkel, Cabelas, Universal, and all commercial grade meat grinders. Will fit your auger if it has the 3/4" square end.

Cincinnati OD Grinder with ID Grinding Attachment Max Workpiece Approx. 10'' OD x 36'' Long Bought for a job that we did, and worked excellently. We no longer manufacture those parts, so it has been idle for a while.

Jones & Shipman 10-20 OD ID grinder buck 6 jaw chuck works perfect call Sean 818-355-2974 

Carbide Tipped Milling Cutters 311031 -12F