+ Post new Ad
Nice Machinist Die Maker's V-Blocks, US $280 – Picture 0
Nice Machinist Die Maker's V-Blocks, US $280 – Picture 1
Nice Machinist Die Maker's V-Blocks, US $280 – Picture 2
Nice Machinist Die Maker's V-Blocks, US $280 – Picture 3
Nice Machinist Die Maker's V-Blocks, US $280 – Picture 4
Nice Machinist Die Maker's V-Blocks, US $280 – Picture 0
Nice Machinist Die Maker's V-Blocks, US $280 – Picture 1
Nice Machinist Die Maker's V-Blocks, US $280 – Picture 2
Nice Machinist Die Maker's V-Blocks, US $280 – Picture 3
Nice Machinist Die Maker's V-Blocks, US $280 – Picture 4

Nice Machinist Die Maker's V-blocks

US $280

  • Rome, New York, United States
  • Jan 30th
Open on mobile:
QR code
Nice Machinist Die Maker's V-Blocks These Matched Blocks are in V.G,C. although they could use a good Cleaning. Blocks Meas. 1-1/2”x1-1/2”x1-1/2” “V”’s are 3/4 ” & 1” , Clamp (not in sale) Slot 1/8” x 1/4 ”. Combine Wins & Save Shipping $$$$$. Have FUN BIDDING & GOOD LUCK “Check out my other items!”   Hi my name is David;        WHERE APPLICABLE I will COMBINE SALES  “Please E-Mail me & I will Hold your items until your done bidding” . ANY INCREASE IN POSTAGE DUE TO WEIGHT INCREASE or Size WILL APPLY PLUS A MINIMAL Handling CHARGE Per Item ($1.50).  The more you combine the more you will save in Shipping Charges. Shipping Charges can be pre calculated upon request.       ALL INTERNATIONAL BIDDERS PLEASE READ SELLERS PAYMENT INSTRUCTIONS. Insurance & Tracking #’s are at the buyers expense upon request.           If you have any problems with any of my items Please email me so we can try to resolve problem outside of Ebay.                                Over the next few months I will be adding items daily. If you are looking for something particular contact me if I have it I will post it or possibly I can locate it. Item # GS-j7         
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “SEE DESC. & PIC'S”

Directions

Similar products from Supporting Blocks & Sets

BROWN & SHARPE 749 V BLOCKS and CLAMP

BROWN & SHARPE 749 V BLOCKS and CLAMP

  • Northumberland, Pennsylvania, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Tools Cutters Blocks Parts Etc

MACHINIST LATHE MILL Lot of Machinist Tools Cutters Blocks Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
Vintage Machinist V Block 6" x 4" x 2-1/2" Good Condition 10 Lb Block Shop Made

Vintage Machinist V Block 6" x 4" x 2-1/2" Good Condition 10 Lb Block Shop Made

  • La Puente, California, United States
  • Jan 30th
1" V - Block Set

1" V - Block Set

  • Rocky Point, North Carolina, United States
  • Jan 30th
Vintage Machinist V Block 4" x 2-5/8'' X 2-1/2" Good Condition 5 Lbs Shop Made

Vintage Machinist V Block 4" x 2-5/8'' X 2-1/2" Good Condition 5 Lbs Shop Made

  • La Puente, California, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Blocks Cutters Calipers Bearings Chuck Etc

MACHINIST LATHE MILL Lot of Machinist Blocks Cutters Calipers Bearings Chuck Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Lot of Machinist Parallel and Other Blocks For Set Up

MACHINIST TOOLS LATHE MILL Lot of Machinist Parallel and Other Blocks For Set Up

  • Morris Plains, New Jersey, United States
  • Jan 30th
TECO Step Block Kit, 1" Thick, 2 Blocks Each 40102, 40103, 40104, 30507 Clamps

TECO Step Block Kit, 1" Thick, 2 Blocks Each 40102, 40103, 40104, 30507 Clamps

  • Prescott, Arizona, United States
  • Jan 30th
ERON MILLING SETUP V-BLOCKS RISERS 1-5/8" CAPACITY PAIR HEAVY DUTY CAST IRON

ERON MILLING SETUP V-BLOCKS RISERS 1-5/8" CAPACITY PAIR HEAVY DUTY CAST IRON

  • Jamestown, New York, United States
  • Jan 30th
UNIQUE 30 DEGREE BUSHING BLOCK WORKHOLDING 3/8" TO 1" CAPACITY

UNIQUE 30 DEGREE BUSHING BLOCK WORKHOLDING 3/8" TO 1" CAPACITY

  • Jamestown, New York, United States
  • Jan 30th
Machinist Tombstone , 2-3/64" x 3-1/64" x 4-63/64" w/ 1/4" - 20 Holes, USA

Machinist Tombstone , 2-3/64" x 3-1/64" x 4-63/64" w/ 1/4" - 20 Holes, USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
MACHINIST LATHE MILL Lot Machinist Chuck Keys Arbor Tap Wrench Circle Cut Etc

MACHINIST LATHE MILL Lot Machinist Chuck Keys Arbor Tap Wrench Circle Cut Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist New Cutters Punches Lathe Dogs Lever Etc

MACHINIST LATHE MILL Lot of Machinist New Cutters Punches Lathe Dogs Lever Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Hardened Set UP Hold Down Parallel Block s

MACHINIST LATHE MILL Lot of Hardened Set UP Hold Down Parallel Block s

  • Morris Plains, New Jersey, United States
  • Jan 30th
Vintage LS Starrett No.129 bench block Machinist Tool 3" Diameter 1-1/2 High

Vintage LS Starrett No.129 bench block Machinist Tool 3" Diameter 1-1/2 High

  • Broken Arrow, Oklahoma, United States
  • Jan 30th
Vintage Starrett No. 54B 5 in. Hold Downs

Vintage Starrett No. 54B 5 in. Hold Downs

  • Dahlonega, Georgia, United States
  • Jan 30th
BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 462, 2 Clamps

BROWN & SHARPE MATCHED PAIR V-BLOCK HARDENED 750B,# 462, 2 Clamps

  • Rehoboth, Massachusetts, United States
  • Jan 30th
LUFKIN No.905 V-BLOCK SET MATCHED TOOLMAKER VINTAGE

LUFKIN No.905 V-BLOCK SET MATCHED TOOLMAKER VINTAGE

  • Woodbury, New Jersey, United States
  • Jan 30th
ZIP STEPPED CAST IRON BLOCKS MACHINIST MULTI-STEP IN 1/4", 1/2", 3/4" & 1" STEPS

ZIP STEPPED CAST IRON BLOCKS MACHINIST MULTI-STEP IN 1/4", 1/2", 3/4" & 1" STEPS

  • Jamestown, New York, United States
  • Jan 30th
Machinist V-Blocks and Clamps, Large

Machinist V-Blocks and Clamps, Large

  • Athol, Massachusetts, United States
  • Jan 30th

People who viewed this item also vieved

Bridgeport #2 Morse 1/10" Collet

Bridgeport #2 Morse 1/10" Collet

  • Ansonia, Connecticut, United States
  • May 24th
ER25 9 mm precision collet 9mm USA seller / shipper

ER25 9 mm precision collet 9mm USA seller / shipper

  • Marco Island, Florida, United States
  • May 24th
LIGHTLY USED SANDVIK C12 BALAS COLLET 1-1/4" C-12 1.250" (A393.09-STC12)

LIGHTLY USED SANDVIK C12 BALAS COLLET 1-1/4" C-12 1.250" (A393.09-STC12)

  • Fairfield, Iowa, United States
  • May 24th
Suburban PAW-020202 Machined Angle Plate - DIMENSIONS: 2'x 2'x 2'

Suburban PAW-020202 Machined Angle Plate - DIMENSIONS: 2'x 2'x 2'

  • Duncan, South Carolina, United States
  • May 24th
SUBURBAN Open End Slotted Angle Plate #SAO060504 dim. (Inch) 6''x 5'' x 4-1/2''

SUBURBAN Open End Slotted Angle Plate #SAO060504 dim. (Inch) 6''x 5'' x 4-1/2''

  • Duncan, South Carolina, United States
  • May 24th
SUBURBAN Precision Ground Angle Plate - MODEL #: PAW030303G

SUBURBAN Precision Ground Angle Plate - MODEL #: PAW030303G

  • Duncan, South Carolina, United States
  • May 24th
Lab Retort Clamp with BossHead forchemistry lab, Flask Holding Clamp pack of 8

Lab Retort Clamp with BossHead forchemistry lab, Flask Holding Clamp pack of 8

  • AMBALA, HARYANA, India
  • May 25th
Small Parts 1018 Steel T-Slot Nut, Black Oxide Finish, Grade 5, Tapped Through,

Small Parts 1018 Steel T-Slot Nut, Black Oxide Finish, Grade 5, Tapped Through,

  • USA, United States
  • May 25th
Small Parts Te-Co 20601 38 Piece T-Nut and Stud Kit, 5/16"-18 Stud x 3/8" Table

Small Parts Te-Co 20601 38 Piece T-Nut and Stud Kit, 5/16"-18 Stud x 3/8" Table

  • USA, United States
  • May 26th
12" CNC CINCINNATI MILACRON MACHINE 3 JAW CHUCK

12" CNC CINCINNATI MILACRON MACHINE 3 JAW CHUCK

  • Chicago, Illinois, United States
  • May 26th
2ND QUALITY SWISS MADE NEW MASTER SHANK ARBOUR CHUCK MILLING DRILL LATHE

2ND QUALITY SWISS MADE NEW MASTER SHANK ARBOUR CHUCK MILLING DRILL LATHE

  • BROMYARD, Herefordshire, United Kingdom
  • May 26th
Burnerd Griptru 6 Jaw Self Centring Scroll Chuck Step Precision Model 131Z Pratt

Burnerd Griptru 6 Jaw Self Centring Scroll Chuck Step Precision Model 131Z Pratt

  • Camden, New South Wales, Australia
  • May 26th
Miyano S10 Collet Adapter Chuck for BNC-20 CNC Turning Center Lathe

Miyano S10 Collet Adapter Chuck for BNC-20 CNC Turning Center Lathe

  • Millstone Township, New Jersey, United States
  • May 27th
LIVE CENTER / REVOLVING CENTER : 1MT MULTIPOINT WITH SEVEN INTERCHANGEABLE TIPS

LIVE CENTER / REVOLVING CENTER : 1MT MULTIPOINT WITH SEVEN INTERCHANGEABLE TIPS

  • DELHI, DELHI, India
  • May 27th
USED SKODA LIVE CENTER 243326 MK3 IN CASE Interchangeable tips

USED SKODA LIVE CENTER 243326 MK3 IN CASE Interchangeable tips

  • Walland, Tennessee, United States
  • May 27th
Dayton 8" Quick Grip/Release Vise 4YG29 4YG29D 8 inch

Dayton 8" Quick Grip/Release Vise 4YG29 4YG29D 8 inch

  • La Grange, Illinois, United States
  • May 27th
KURT VISE HANDLE 3/4" FOR 6" VISE

KURT VISE HANDLE 3/4" FOR 6" VISE

  • California, United States
  • May 27th
Machinist Vice

Machinist Vice

  • Columbus, Ohio, United States
  • May 27th
Parlec c40-50em2 weldon style end mill holder coolant through 1/2"id cat40

Parlec c40-50em2 weldon style end mill holder coolant through 1/2"id cat40

  • Middlebury, Indiana, United States
  • Jun 4th
Right hand CNC quick change tool holder w/jetstream ciks12r8 coolant through

Right hand CNC quick change tool holder w/jetstream ciks12r8 coolant through

  • Middlebury, Indiana, United States
  • Jun 4th
C6-SLSNR-00110-15 tool holder taper shank 110mm length 63mm OD coolant through

C6-SLSNR-00110-15 tool holder taper shank 110mm length 63mm OD coolant through

  • Middlebury, Indiana, United States
  • Jun 4th
36" x 60" Farmington Air Lift Rotary Indexing Table

36" x 60" Farmington Air Lift Rotary Indexing Table

  • Granger, Iowa, United States
  • Jun 7th
Tsudakoma 8-3/4" Dia. Twin NC Rotary Table, # RNCV-201R2, Matsuura MC-800VDC

Tsudakoma 8-3/4" Dia. Twin NC Rotary Table, # RNCV-201R2, Matsuura MC-800VDC

  • Grand Rapids, Michigan, United States
  • Jun 7th
Velmex Model B4818TS Unislide Rotary Table

Velmex Model B4818TS Unislide Rotary Table

  • Plano, Texas, United States
  • Jun 7th
"Trendz Tunisian Single Ended Crochet Hook 12""-Size K/6.5mm"

"Trendz Tunisian Single Ended Crochet Hook 12""-Size K/6.5mm"

  • Hickory Hills, Illinois, United States
  • Jun 11th
"Cubics Platina Single Pointed Needles 14""-Size 1/2.25mm"

"Cubics Platina Single Pointed Needles 14""-Size 1/2.25mm"

  • Hickory Hills, Illinois, United States
  • Jun 11th
Liquitex Heavy Body Acrylic Paint 138ml-Titanium White

Liquitex Heavy Body Acrylic Paint 138ml-Titanium White

  • Hickory Hills, Illinois, United States
  • Jun 11th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies