New Sensorswitch Cmr 9 360 Deg 120/277 Vac Passive Infrared Ceiling Mount

US $45.00

  • Yorkville, Illinois, United States
  • Jan 30th
SPECIFICATIONS: OCCUPANCY CONTROLLED DIMMING (D) • Provides dimming output to control 0-10 VDC dimmable ballasts • Provides a second occupancy time-out period that enables the lights to go to a dim setting before turning off • Adjustable max/min dim setting PHOTOCELL (P) • Auto set-point calibration • Two selectable modes of operation • On/Off mode: Photocell has full control during periods of occupancy • Inhibit mode: Photocell can prevent lights from turning on if adequate daylight is available, but cannot turn lights off PHOTOCELL w/ DIMMING (ADC) • Photocell within sensor maintains total room light level by controlling levels of 0-10 VDC dimmable ballasts • Photocell also has full on/off control during periods of occupancy • Provides a second occupancy time-out period that enables the lights to go to a dim setting before turning off Note: LampMaximizer+ features not available with ADC option 347 VAC (347) • Allows sensor to be powered from and switch 347 VAC LOW TEMP/HIGH HUMIDITY (LT) • Sensor electronics are coated for corrosion resistance • Operates down to -40? F/C) • Required for cooler/freezer applications OVERVIEW The CMR 9 Series Standard Range 360° occupancy sensor incorporates Passive Infrared (PIR) detection technology into an attractive line powered occupancy sensor that provides amazing sensitivity to small motions (e.g. hand movements) and excellent payback. The CMR 9 is an economical solution for providing automatic lighting control where a wall switch replacement sensor is not applicable. With an integrated line switching relay, the CMR 9 is perfect for applications where locating a power pack is difficult, such as retrofitting rooms with concrete or inaccessible ceilings. For rooms with obstructions, the CMR PDT 9 Series sensor is recommended. SENSOR OPERATION The sensor detects changes in the infrared energy given off by occupants as they move within the field-of-view. When occupancy is detected, a self-contained relay switches the connected lighting load on. The sensor is line powered, switches line voltage, and requires no field calibration or sensitivity adjustments. LAMPMAXIMIZER   FEATURES 100% Digital PIR Detection, Excellent RF Immunity 360? Coverage Pattern Self-Contained Relay, No Power Pack Needed No Minimum Load Requirements Interchangeable Hot & Load Wires, Impossible to Wire Backwards Push-Button Programmable Adjustable Time Delays No Field Calibration or Sensitivity Adjustments Required Convenient Test Mode 100 hr Lamp Burn-in Timer Green LED Indicator LAMPMAXIMIZER® TECHNOLOGY • Protects Lamp Life while Maximizing Energy Savings • Minimum On Timer (15 min default) • Occ. Time Delay (10 min defatult) • LampMaximizer+ Mode - Optimizes Lamp Life & Energy Savings (disabled by default) • Switch Counter (in 1000’s) • Total Lamp On Time (in khrs) PHYSICAL SPECS SIZE 4.55” Dia. (11.56 cm) 1.55” Deep (3.94 cm) WEIGHT6 oz MOUNTING 3.5” Octagon Box Single Gang Handy Box COLORWhite ELECTRICAL SPECS MAXIMUM LOAD 800 W @ 120 VAC 1200 W @ 277 VAC 1500 W @ 347 VAC    

Directions

Similar products from Fire Alarming Systems

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies