New Ideal 61-791 Megger Insulation Tester; 600 Volt

US $180

Brentwood, California, United States
Jun 19th

Open on mobile:
QR code

Accuracy -0% to 30% For Voltage Alternate Part Number 61791 Item Insulation Tester Mfr/Vendor Ideal ShortDescriptionStripped Ideal-61-791-Megger-Insulation-Tester Standards CAT III - 300V Safety Rated Sub Brand Megger® UPC 783250617913 Voltage Rating 600 Volt description Ideal Megger® Insulation tester is designed for testing insulation resistance, voltage and continuity in electrical installations. It has combined curved analogue/3 digit LCD digital display with continuity beeper. It includes a display back light with low battery indication and a default voltmeter. It features test inhibition that occurs above 25 Volts. Tester has an auto shut off feature that operates after 5 minutes of inactivity by the instrument in continuity position and 12 minutes in insulation position. It features auto discharge, power off and ranging. It has a voltage rating of 600 VAC/VDC and allows continuity with ohms/200 milli-Amps. Insulation tester conducts an insulation test to measure voltage and resistance. It measures insulation voltage of 250/500/1000 Volts providing an accuracy of -0% + 30% at 0 - 1 milli-Amps load. It measures insulation resistance from 0.01 - 999 Mega-Ohm in digital display/0.1 - infinity Mega-Ohm in analogue display providing an accuracy of +/- 3% +/-2 digits up to 10 Mega-Ohm/+/- 5% +/-2 digits up to 100 Mega-Ohm/+/-30% up to 999 Mega-Ohm at 20 deg C. It measures short circuit current less than 2 milli-Amps and output noise voltage of 2 Volts peak to peak at 20 kHz. It provides hum rejection with less than 10% error and 100 micro-Amps RMS. Insulation tester also conducts continuity test to measure resistance. It measures resistance from 0.01 - 999 Ohm providing an accuracy of +/-3% +/-2 digits when short circuit current is less than 200 milli-Amps and from 10 - 100 Ohm providing an accuracy of +/-5% +/-2 digits when short circuit current is less than 20 milli-Amps. It also measures lead resistance from 0 - 999 Ohm and open circuit voltage of 5 Volts with +/-1 Volt. It provides hum rejection with less than 3% error and 1 Volt RMS. Megger insulation tester has temperature coefficient of less than zero and operating temperature range from -20 to +40 deg C. It also has storage temperature of -25 to 65 deg C and humidity rating of about 90% RH at 40 deg C maximum. It measures 195 mm x 98 mm x 40 mm. Tester comes with synthetic zip-up pouch, test leads, prods, protective rubber boot and crocodile clips. Tester meets EMC standards.