New 200 Amp Service Ent Rated, Nema3(exterior), Single Ph, Automatic Transfer Sw

US $1,387.00

  • Ocala, Florida, United States
  • Jan 31st
Thomson Technology TS 910 Automatic Transfer Switches employ a power contactor switching unit with a microprocessor based controller  to automatically start a generator and transfer system load to the generator supply  in the event of a utility supply failure. System load is automatically re-transferred  back to the utility supply following restoration of the utility power source to within  normal operating limits. All load transfer sequences are “Open Transition”  (i.e. “break-beforemake”) utilizing an in-phase transfer detection control sequence.  All TS 910 transfer switch models have been tested in accordance with UL 1008 standards.  Molded case circuit breakers or fuses with overcurrent protection are required upstream of the transfer switch. The standard TS 910 Transfer Switch is rated for 100% system load. The TS 910 series transfer switches use a TSC 9 microprocessor based controller.  All necessary control functions for fully automatic operation are provided. The TSC 9  controller is mounted inside the transfer switch enclosure. Operating status is provided  via LED indicators visible though the front panel on NEMA 1 rated enclosures. The TS 910 Residential Transfer Switches are also available as Service Entrance Rated devices. • 100% Continuous Current Ratings for use with all load types • Suitable for Copper and Aluminum power cable connections • High Short Circuit Withstand Ratings when used with upstream molded case circuit breakers Reliable Solenoid Operated Transfer Mechanism • Fast Operation allows In-Phase Power Transfer • Electrical and Mechanical Interlocked mechanism prevents simultaneous closure of Utility and Generator sources Superior Serviceability • Plug-in Control Devices allow superior field serviceability • Enclosed Power Contacts for safe operation and maintenance Quality Assurance • ISO 9001 Registered Manufacturing Facilities • Complies with: - NEMA & UL50 - UL 508 - IEEE C62.41, C37.90.1 - FCC CFR 47 Part 15, Class B - IEC EN 61000 Electromagnetic Capability Safety Standards • UL 1008 Listed Automatic Transfer Switches for use in optional standby systems Control Features • New/Advanced TSC 9 Series Transfer Controller with features specifically designed for Residential and Light Commercial ATS applications. User programmable timers, Simple LED interface • Outputs for Automatic Load Shed & Remote Alarming • kW Load Shed Control (Optional) Reduces costs by sizing your standby power system for prioritized loads. • Wireless Remote Alarm Messaging Module (Optional) • Universal Generator Interface kit option allows TS 910 to be applied to multiple types of generator sets utilizing 240V remote starting control systems. Product Data • 100A, 200A, 400A Models • Service Entrance rated Models are available • 120/240V Single Phase, 3 wire c/w Neutral • 120/208V Three Phase, 4 wire c/w Neutral • 2 pole/3 pole, 50/60hz • Rust Resistant Aluminum Enclosures • NEMA 3R Door for Outdoor Applications (Optional) • Withstand Short Circuit Current Ratings up to 50kA          
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Thomson Technology, Inc.
MPN TS912A0200B
Model TS910

Directions

Similar products from Transfer Switches

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies