US $4.49
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | M. K. Morse Company |
MPN | AV19 | ||
Model | 1 3/16" Bi-Metal Hole Saw | ||
Country/Region of Manufacture | United States |
Directions
Similar products from Saws & Sawblades
SINGLE SIDED HELICAL SIDE MILLING CUTTER 4 X 3/4 X 1 1/4 16 TEETH NATIONAL #8280
STRAIGHT TOOTH PLAIN MILLING CUTTER 1-3/4 X 0.080 X 3/4 21 TEETH #8219
SLITTING SAW MILLING CUTTER 7/8 ID X 0.015 THICK X 1-33/64 OD #3987A
PLAIN METAL SLITTING COLD SAW 5-1/2 X 13/64 X 1-1/2 30 TEETH #8223
STAGGER TOOTH SIDE MILLING CUTTER 2 31/32 OD X 3/16 W 1" ID X 1/4 KS #8445
PLAIN STRAIGHT TOOTH PLAIN MILLING CUTTER NATIONAL 4" X 1/4" X 1-1/4" #8557
SLITTING SAW BLADE PLAIN TOOTH SIMONDS COBALT 529 6.645 X 0.043 X 1 #8392
MORSE 2-5 4 1/2 25 18R MAT 2-5 FT 4 X 1/2 IN CARBON BAND SAW BLADE STEEL B426192
Morse 1 5/16" Master Cobalt Bi-Metal Hole Saw AV21 NEW Made in USA
Morse 1 1/4" Master Cobalt Bi-Metal Hole Saw AV20 NEW Made in USA
8 piece used slitting cutter blades Assortment
3 pcs 135" x 1"x 0.35" 6/10 ARNTZ Band Saw Blade M42 Bi-metal for J7020 J7040
3 pcs 197"x 1/2"x 0.025" 10/14 ARNTZ Band Saw Blade M42 Bi-metal for VBS-3612
Jet 1/2 Inch x 0.025 Inch x 14R- Carbon Replacement Bandsaw Blade Part#414301
PLAIN METAL SLITTING SAW MILLING CUTTER 2-49/64 X 0.02 X 1 X 1/4 KS #8569
PLAIN MILLING CUTTER 4-3/8 OD X 15/32 THICK X 1-1/4 GORHAM HIGH SPEED #8205
Slitting Saw Simonds 6-55/64 x 0.056 x 1-1/4 ID 150 Teeth #8360
STRAIGHT TOOTH SIDE MILLING CUTTER 1-7/32 X 0.055 X 1/2 20 TEETH #8224
DoAll Band Saw Wheel C80 Horizontal Bandsaw Machine Shop Tool New List $800
People who viewed this item also vieved
1 NEW 6 MM (.235) SHANK CARBIDE BURR. DOUBLE CUT. RADIUS BURR USA MADE. {F959}
H & M H4 Pipe Saddle Beveling Bevel Machine ~ Model 0 ~ 2" to 4"
Spe-D-Cut Carbide Insert Shims No. PTP - 3 Qty. 10 New.
DCMT 3-1-14 IC3028 ISCAR INSERTS FACTORY SEALED PACK (10 Inserts)
3 RESHARPENED NIAGARA ROUGHING ENDMILLS. 1/2" SHANK. 4 FLUTE. HS COBALT. {F881}
ISCAR E75A D1.00-W .75 INDEXABLE END MILL Product ID ISC 3110340
Vintage Watervliet Tool Co. 31/32" Reamer
HERTEL CARB CHUCK REAMER #56 0.0465" Diameter Straight Flute Made In USA NEW
2 Mate Punch Die Sets Round 2.750 3.060
3 Mate Slug Free Punch Die Sets Round 1.670 1.925 1.750
10 Valenite SNE63K-T7 VPQ130 Special Ceramic Insert Inserts NEW
RTW CNGA 543 TO820 C900 CERAMIC INSERT LOT OF 10
Keyway Broach Bushing 7/8" Dia. 3/8" slot .874 Deep 5" OAL
Keyway Broach Bushing 1-3/8" Dia. 3/8" slot .556 Deep 4" OAL
10 Pcs PCB Print Circuit Board Carbide Micro Drill Bits Tool 0.3mm--1.2 mm + Box
4.031" Carbide Bladed Boring Drill Bit 150 Degree 1-1/2" Straight Shank
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies