Mesr-100 Auto Ranging In Circuit Esr Capacitor/low Ohm Meter Up To 0.01 To 100r

US $64.69

  • Shenzhen, China
  • Jan 29th
MESR-100 Auto Ranging In Circuit ESR Capacitor/Low Ohm Meter Up to 0.01 to 100R Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: MESR-100 Auto Ranging In Circuit ESR Capacitor/Low Ohm Meter Up to 0.01 to 100R International Buyers – Please Note: a)  Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. b)  Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. Get MESR-100 for Four Reasons: 1. JINGYAN MESR-100 V2 Auto-ranging capacitor ESR and Low Ohm Meter 2. Measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing. 3. Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer. 4. In the market, there is some technique using short pulse method to testing, but the value will be varying vs the capacitance and sometimes reading is different from the manufacturer's value. What is ESR of capacitor?   1)There is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C), the impedance become small, and we can then measure the true series  resistor value. 2)A bad E-capacitor will have larger ESR and create large ripple rather than filtering noise. Normally, a big capacitor is larger than 3 ohm. 3)Using this theory, we can measure the capacitor is bad/ damaged or good in condition. 4)Because our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test. Because this low testing voltage,  it cannot turn on the semiconductor inside a circuit under testing. 5)During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not. 6)Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check Compare MESR100 old V1 and new V2 Improvement: 1. Change square wave to sine wave 100 KHz, reduce square wave’s high frequency component, and affect the reading passing the test leads and capacitor. 2. Higher Resolution up to 0.001 ohm. 3. Support external USB power, using standard micro-USB port. 4. 128X64 dot matrix LCD, with more larger value display and information 5. New plastic case, curve design for hand carrying. New stand for 60 degree stand on desk. 6. Use 2X AA battery, more convenience and longer battery life than 9V battery. 7. Embedded 25V capacitor table at LCD, auto display the capacitor is good or bad reference to common 25V electrolytic capacitor.   Specification: Range Accuracy (After Zero, tested with 1,10,100R resistor) Refresh Time  (Manual Mode) *Auto mode take  0 to 2s more time depend on value 0.000 to 1.000R 1%+2Digit ~0.4s 1.000 to 10.00R 1%+1Digit ~0.4s 10.00 to 100.0R 2%+1Digit ~0.4s Accuracy maybe affected by the test lead’s length and contact point resistance.   Standard test leads is 15cm, for longer test leads need special shielding to affect the EMI inference (Can contact sales’ person for more detail) 1)  Accuracy:  Up to 1% (detail on above table)      Wide Measurement Range:  >1uF (for 0.1uF the error will be larger on equation 1/(2*pi*F*C) @ 100Khz ) 2) High Resolution: 4 digit, or 0.001Ohm @ 1 Ohm range 3) Measuring voltage: <~40mV RMS (TESTING VOLTAGE) 4) Clamping voltage: ~0.15V (open voltage) 5) Battery 2X AA 1.5V battery 6) External Power: 5V micro USB 7) Operating current 0.02A 8) Battery Life time: >80 Hours   Operating Introduction:   1) POWER ON Press and hold the ON/ OFF circle orange button for 2 to 3 second to power on. Press and release the ON/ OFF button to shut down meter.   2) AUTO/ MANUAL mode: i) Auto Range: Press and release the RANGE button and at the first line of LCD will show “AUTO:" At auto mode meter will automatically select the best range to detect.  ii) Manual Range: Scroll the manual range from 1R, 10R and 100R range by press and release the RANGE button In LCD will show MANUAL at first LCD line and show at second line: 0-1R, 1-10R and 10-100R. 3) 1 Key Zero: Short circuit the test leads’ terminal, cancelling the wire resistance. Press and release the “ZERO" button, LCD shows “ZERO" and wait the zero disappear. If you are using the meter array socket, you need to use a short pin to short circuit to set zero.   4) Backlight: LCD backlight will on during power on   5) Auto Sleep: Around 10 hours for not testing, it will shut down automatically to save power.   6) OVERFLOW or OL: Display overflow when the value is out of range, you can check that you are zero correctly.   7) ESR TABLE: It is for reference only, different manufacturer of capacitor has different ESR, better to test a good cap ESR and compare with what you are testing, usually bad cap with  higher ESR few times larger than good one.   8) SOFTWARE ESR: Put the 25V Electrolytic capacitor value to LCD, and compare, GOOD if C < XXuF, means the capacitor maybe good condition if it is less than XXuF   9) PLASTIC STAND: If you don’t use the stand, press and push the lock position:   Package including:   1unit  x  MESR-100 V2 1pair  x  15cm test clips (as photo) Return policy: 1.If you not satisfied with the     items you got you can asked for the exchange and refund, return the item should be within 14 days.  2.Only accept exchange or full refund at these conditions: Quality problem, items interior faulty,      and other damages not caused by customer wrong operations.  3.You can ask for resend parts or partial refund if you got items are damaged, scratched or parts        missed causing by delivery. Delivery: 1.All the items will be shipped within 1 business days after you payment received and clearled. 2.Please make sure your shipping address provided by paypal is correct. 3. Items will be shipped by Air Mail post,DHL or EMS.By airmail post,it always tooks about 15-25 working days,by DHL is about 3-7 working days,by       EMS is 7-10 working days,Service Transit Time is provided by the carrier and excludes weekends and holidays.Transit   times may vary, particularly during the holiday season. It may take a little more time to arrive if you are in the remote region . 4.If you don't receive the item after the 30 days, please contact us freely, we'll try our best to    solve the delivery problem for you. Warranty: 1.We provides One-Year Warranty Service that covers for all products. All our products are covered by a One-        Year warranty for return and repair / replacement.  2.Our certified technicians have tested each item before shipping them out. 3.Unlimited Technical Service is offered through e-mails, on-line chatting, remote-control service by engineers Contact us: 1. If you have any questions,please contact us by Ebay message . We will try our best to provide the best service and reliable products for every customer.We would be very glad to help you. We would try our best to reply to your emails as soon as possible, however,  2. due to high volume of daily incoming emails and time zone difference, we may not be able to reply  your emails immediately. We will responde you within 24 hours. Please contact us to resolve  the issue before leaving negative feedback or low detail seller ratings.Thanks! 3. Working time: GMT8 (8:30-18:00) from Monday to Friday.   Shipping: We would ship out the item within 1 business days after the payment is received.Our QC will test goods carefully before sent out. Items will be shipped by Air Mail post,DHL or EMS.By airmail post,it always tooks about 15-25 working days,by DHL is about 3-7 working days,by EMS is 7-10 working days,Service Transit Time is provided by the carrier and excludes weekends and holidays.Transit times may vary, particularly during the holiday season. It may take a little more time to arrive if you are in the remote region . We will send item to your Confirmed Shipping Address in Paypal. If you would like to post to other address , please timely leave us a note when making payment through Paypal. We hope it arrive on time but since this is an international delivery, shipping time will be highly depended on the courier company and local customs/duties. If you don't receive the item after the 30 days, please contact us freely, we'll try our best to solve the delivery problem.   Payment: 1.We only accept to make the payment by paypal,E-Check will be held until cleared. 2.Please make payment within 3 days after bidding,or all non-pay bidders will result in a non-paymemt buyer alert from Ebay and unpaid transcation would be closed.Do not bid if you are not going to pay for the auctions, please be a serious bidder.   inkfrog terapeak i000000
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Warranty Yes
Country of Manufacture China

Directions

Similar products from Capacitance Testers & Meters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies