Maple wood veneer 36" x 96" with paper backer (3' x 8' x 1/40th") "B" grade, US $40.00 – Picture 0

Maple wood veneer 36" x 96" with paper backer (3' x 8' x 1/40th") "B" grade, US $40.00 – Picture 1

Maple Wood Veneer 36" X 96" With Paper Backer (3' X 8' X 1/40th") "b" Grade

US $40.00

Louisville, Kentucky, United States
Jun 9th

Open on mobile:
QR code

Maple wood veneer sheet 36" x 96" on paper backer (3' x 8' x 1/40th" overall thickness). "B" grade quality. Probably only suitable as a backer that won't be seen. *Sheet is considered "B" grade because: 1) It is discolored by sunlight 2) It has some minor sand through areas Most sheets are considered "Flat Cut" which results in wider, open grain and cathedrals. "Quarter Cut" would show tight, closed grain and be straighter. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. Visit My eBay Store: JSO Wood Products Other sizes, backers and unbacked veneer may be available. About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Maple wood veneer sheet with paper backer roll 10m
MPN	American White Maple real genuine wood veneer thin
Model	Maple wood veneer Flat Cut flexible open grain F/C
Maple wood veneer paper backer	48" x 96" sheet 10 mil 4' x 8' flat cut woodgrain