+ Post new Ad
MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (21,23,27,29,31,33) (1-1/4), US $850 – Picture 0
MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (21,23,27,29,31,33) (1-1/4), US $850 – Picture 1
MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (21,23,27,29,31,33) (1-1/4), US $850 – Picture 0
MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (21,23,27,29,31,33) (1-1/4), US $850 – Picture 1

Machinist Tools – 5” Dividing Head / Dividing Plate (21,23,27,29,31,33) (1-1/4)

US $850

  • Camarillo, California, United States
  • Jan 30th
Open on mobile:
QR code
  MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (21,23,27,29,31,33) (1-1/4) CONDITION:  Used / See Photos / Normal Wear and Tear Good Working Condition:   Owner Markings: NO Will Combine Shipping – Email me and I will provide you an updated invoice. Click Here to Check out my EBay Store Please review the shipping charges to make sure you are comfortable with that charge.  If you feel the charge is excessive, then please e-mail before you purchase.  All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times it is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions     
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “CONDITION: Used / See Photos / Normal Wear and Tear”

Directions

Similar products from Fittings & Plates

Bison Plate For BACK Mount Only 6" For "Set-Tru" Chuck

Bison Plate For BACK Mount Only 6" For "Set-Tru" Chuck

  • Columbus, Ohio, United States
  • Jan 30th
CUT-OFF TOOL SET

CUT-OFF TOOL SET

  • New Castle, Pennsylvania, United States
  • Jan 30th
0-4"DIGIMATIC DEPT GAGE

0-4"DIGIMATIC DEPT GAGE

  • New Castle, Pennsylvania, United States
  • Jan 30th
42" x 20" T SLOTTED STEEL TABLE Cast Iron Coolant Type Layout Fixture Welding

42" x 20" T SLOTTED STEEL TABLE Cast Iron Coolant Type Layout Fixture Welding

  • Coopersville, Michigan, United States
  • Jan 30th
39.5" x 19" T SLOTTED STEEL TABLE Cast Iron Coolant Type Layout Fixture Welding

39.5" x 19" T SLOTTED STEEL TABLE Cast Iron Coolant Type Layout Fixture Welding

  • Coopersville, Michigan, United States
  • Jan 30th
A1801 - Universal Angle Sine Plate, 7" x 7" Precision, Heavy Duty

A1801 - Universal Angle Sine Plate, 7" x 7" Precision, Heavy Duty

  • Ann Arbor, Michigan, United States
  • Jan 30th
DME 10 x 12 Double Unit Holder Aluminum Die Casting With Machine And Die Clamps

DME 10 x 12 Double Unit Holder Aluminum Die Casting With Machine And Die Clamps

  • Plantsville, Connecticut, United States
  • Jan 30th
5pc 5C HEX & SQUARE COLLET BLOCK SET & 17pc 5C COLLET SET 1/16-1" BY 16ths

5pc 5C HEX & SQUARE COLLET BLOCK SET & 17pc 5C COLLET SET 1/16-1" BY 16ths

  • Garden Grove, California, United States
  • Jan 30th
60" x 25" x 9" T-Slotted Table Cast Iron Steel Layout Welding _ A15016 _ A15017

60" x 25" x 9" T-Slotted Table Cast Iron Steel Layout Welding _ A15016 _ A15017

  • Grand Rapids, Michigan, United States
  • Jan 30th
MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (15-20) (1-1/4)

MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (15-20) (1-1/4)

  • Camarillo, California, United States
  • Jan 30th
MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (37,39,41,43,47,49 (1-1/4)

MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (37,39,41,43,47,49 (1-1/4)

  • Camarillo, California, United States
  • Jan 30th
Suburban Master grind very nice 5C lathe milling machine grinding

Suburban Master grind very nice 5C lathe milling machine grinding

  • Cave Creek, Arizona, United States
  • Jan 30th
de Whiton Machine Co 4" lathe chuck independent reversible 3 jaw.

de Whiton Machine Co 4" lathe chuck independent reversible 3 jaw.

  • Waterbury, Connecticut, United States
  • Jan 30th
MACHINIST MILL X Y Table Milling Mill Machine Drill Press w/ tooling plate

MACHINIST MILL X Y Table Milling Mill Machine Drill Press w/ tooling plate

  • Rochester, New York, United States
  • Jan 30th
Precision Right Angle Blocks

Precision Right Angle Blocks

  • Hayward, California, United States
  • Jan 30th
NOS Busch Precision USA 6"X6"X6" UNIVERSAL RIGHT ANGLE PLATE #2710 LIST $855

NOS Busch Precision USA 6"X6"X6" UNIVERSAL RIGHT ANGLE PLATE #2710 LIST $855

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA 4"X4"X4" UNIVERSAL RIGHT ANGLE PLATE #PE2704G LIST $665

NOS Busch Precision USA 4"X4"X4" UNIVERSAL RIGHT ANGLE PLATE #PE2704G LIST $665

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA 5"X4"X5.5" GROUND SLOTTED ANGLE PLATE #PE3505G LIST $685

NOS Busch Precision USA 5"X4"X5.5" GROUND SLOTTED ANGLE PLATE #PE3505G LIST $685

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA 3.75"X4"X5" UNIVERSAL RIGHT ANGLE PLATE #PE2703G $620

NOS Busch Precision USA 3.75"X4"X5" UNIVERSAL RIGHT ANGLE PLATE #PE2703G $620

  • Perth, Ontario, Canada
  • Jan 30th
NOS Busch Precision USA 4"X3"X2.5" TOOLMAKERS KNEE RIGHT ANGLE Plate #2001 $550

NOS Busch Precision USA 4"X3"X2.5" TOOLMAKERS KNEE RIGHT ANGLE Plate #2001 $550

  • Perth, Ontario, Canada
  • Jan 30th

People who viewed this item also vieved

KENNAMETAL ERICKSON COLLET 19/32 UNUSED FROM OLD STOCK. SB6

KENNAMETAL ERICKSON COLLET 19/32 UNUSED FROM OLD STOCK. SB6

  • Cincinnati, Ohio, United States
  • Mar 25th
SANDVIK TAP DRIVER COLLET 22098-20.32-.800

SANDVIK TAP DRIVER COLLET 22098-20.32-.800

  • Wadley, Alabama, United States
  • Mar 25th
LOT of (30) R-S-B SOUTH BEND 5C COLLETS, METRIC: 2mm-27mm

LOT of (30) R-S-B SOUTH BEND 5C COLLETS, METRIC: 2mm-27mm

  • Bremen, Indiana, United States
  • Mar 25th
LARGE USED MACHINIST PARALLEL CLAMP 6" Jaws 4" Capacity metal work holding tool

LARGE USED MACHINIST PARALLEL CLAMP 6" Jaws 4" Capacity metal work holding tool

  • Rushville, Indiana, United States
  • May 13th
Pair 6” Deep Kant Twist Clamps

Pair 6” Deep Kant Twist Clamps

  • Bonne Terre, Missouri, United States
  • May 13th
Bessey SQ8 8-Inch Super Quick All Steel Sliding Arm Clamp

Bessey SQ8 8-Inch Super Quick All Steel Sliding Arm Clamp

  • Olympia, Washington, United States
  • May 14th
21" WARNER & SWASEY, 4-JAW CHUCK, M-1614-9, T & G JAWS, 6.5" HOLE, A2-11

21" WARNER & SWASEY, 4-JAW CHUCK, M-1614-9, T & G JAWS, 6.5" HOLE, A2-11

  • Waukesha, Wisconsin, United States
  • May 26th
27.5" 4-JAW MANUAL CHUCK, TM, 10.25" HOLE, ONE PIECE JAWS, A2-11

27.5" 4-JAW MANUAL CHUCK, TM, 10.25" HOLE, ONE PIECE JAWS, A2-11

  • Waukesha, Wisconsin, United States
  • May 26th
6 1/4" 3 Jaw Self Centering Poland Lathe Chuck With 2 1/4" rear thread 8ZD

6 1/4" 3 Jaw Self Centering Poland Lathe Chuck With 2 1/4" rear thread 8ZD

  • West Palm Beach, Florida, United States
  • May 27th
WILTON Combination VISE, C0, 3 1/2' JAWS, PIPE JAWS, IN EXCELLENT CONDITION

WILTON Combination VISE, C0, 3 1/2' JAWS, PIPE JAWS, IN EXCELLENT CONDITION

  • Vista, California, United States
  • May 27th
Ridgid F Series Forged Steel Bench Swivel Vise 6" Jaw Width Machinist

Ridgid F Series Forged Steel Bench Swivel Vise 6" Jaw Width Machinist

  • Baton Rouge, Louisiana, United States
  • May 27th
Bridgeport Milling Vise With Jaws (Inv.33315)

Bridgeport Milling Vise With Jaws (Inv.33315)

  • Portland, Connecticut, United States
  • May 28th
ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''

ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''

  • Duncan, South Carolina, United States
  • May 24th
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''

BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

  • Duncan, South Carolina, United States
  • May 24th
Magna-Lock Vacuum Chuck Controller Unit, Used

Magna-Lock Vacuum Chuck Controller Unit, Used

  • Middlebury, Connecticut, United States
  • May 31st
CARR LANE Clamping Valves (3-Way) CLR-439-VA

CARR LANE Clamping Valves (3-Way) CLR-439-VA

  • Jackson, Michigan, United States
  • May 31st
MACHINIST TOOL LATHE MILL Machinist Starrett # 5190 Screw Jack Set in Box

MACHINIST TOOL LATHE MILL Machinist Starrett # 5190 Screw Jack Set in Box

  • Morris Plains, New Jersey, United States
  • May 31st
large Indexing Dividing Head L-W Chuck Co. Toledo Ohio USA WITH CHUCK

large Indexing Dividing Head L-W Chuck Co. Toledo Ohio USA WITH CHUCK

  • Clermont, Georgia, United States
  • Jun 4th
25" Troyke T-slotted Rotary Table Model BH-25

25" Troyke T-slotted Rotary Table Model BH-25

  • Reading, Pennsylvania, United States
  • Jun 4th
4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE

4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE

  • Diamond Bar, California, United States
  • Jun 4th
MACHINIST LATHE MILL Machninst Large Ground Set Up Block Fixture Step Block

MACHINIST LATHE MILL Machninst Large Ground Set Up Block Fixture Step Block

  • Morris Plains, New Jersey, United States
  • Jun 4th
MAGNETIC V BLOCK, 2 SIDED - 1" & 2"

MAGNETIC V BLOCK, 2 SIDED - 1" & 2"

  • Pinellas Park, Florida, United States
  • Jun 4th
1.75” x 1.75” x 2” Vee Block

1.75” x 1.75” x 2” Vee Block

  • Euclid, Ohio, United States
  • Jun 4th
Hertel HCV50ER32400 Collet Chuck Series ER-32

Hertel HCV50ER32400 Collet Chuck Series ER-32

  • Venice, Florida, United States
  • Jun 9th
B&V collet chuck 20 MM w/ case

B&V collet chuck 20 MM w/ case

  • Montebello, California, United States
  • Jun 9th
Lot Of 2 SANDVIK COROMANT C6-391.14-20 060 Collet Chuck Adapters

Lot Of 2 SANDVIK COROMANT C6-391.14-20 060 Collet Chuck Adapters

  • San Bernardino, California, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies