LPG Filler Gun & Hose CGA 555 to POL/BBQ, with Primus and Companion Adapters LPG Filler Gun & Hose, comes with 3/8 camper and Primus cylinder Adapters. This kit is suited to refilling from Blue top liquid withdrawal gas bottle fittings to POL Fittings found in 9kg, 4kg, 2kg barbecue gas bottles. This kit is used in conjunction with a "Blue Top"(blue top tanks pictured) Liquid withdrawal 45, 90, 210KG LPG tank with CGA 555 outlet on the tank to any smaller BBQ (CGA510 POL) bottle with either POL, 3/8 Camper and Primus valves. *Safety, there is an excess flow valve in stalled to stop the gas flow if the inlet fitting is broken of in use. *Safety, the trigger has an inbuilt hydrostatic over pressure set to 3.3mpa to protect the hose and operator. *Safety, the trigger has automatic shut off once the trigger is release and then a spring loaded latch automatically locks the trigger into the off position. *This gun is made in Australia, one of Australia's largest LPG valve manufactures Please note this is for Liquid withdrawal tanks only and will not connect to VAPOR withdrawal fittings from a BBQ/POL fitting on the tank you wish to get the gas out from. Model No: FGKIT-CGA Nozzle end: POL Male Inlet end: CGA555 Male ( Liquid withdrawal bottles only ) Hose Length: 1200mm 1 x fill gun and hose with male CGA 555 and CGA 510 (BBQ/ POL) fittings each end 1 x each of 3/8 Companion Adapter. 1 x Primus cylinder Adapter. Blue top tanks not included. WARNING LPG is a compressed flammable liquid. Only licensed, trained and competent personal should conduct any operation or repairs relating to an LPG systems, LPG Component or LPG Storage Vessels. Be aware of your surroundings as LPG vapour is flammable and must be kept away from all ignition sources such as pilot lights and piezo igniters in hot water systems, open flames, cigarettes, welding and grinding sparks and any other potential ignition source. Avoid direct contact with liquid LPG as a freeze burn may result. One litre of liquid LPG expands to 270 litres of combustible vapour. Personal protective equipment must be worn when working with LPG. Cylinders are designed to only fill to 80% of the water capacity to allow for expansion of the liquid with temperature changes. This 80% level must not be exceeded when filling an LPG Cylinder. Ensure the LPG storage vessel(s) are in date and in good repair prior to filling. Appliances intended to use vapour must not be supplied liquid LPG. Catastrophic failure may result. Ensure all connections, seals, hoses and valves are clean, undamaged and in good repair prior to carrying out any operation. All connection must be check for leaks with a non-corrosive leak detection fluid prior to operation. Keep all LPG Storage Vessels out of reach of Children. Improper installations and repairs could result in serious personal injury and property damage. ITEMS ship by Regular postage within Australia. Express postage is also available at an additional cost. This option may be selected during check out Procedure. Larger items may ship with Direct Freight or Couriers Please as deemed suitable. Orders ship same day, or next business day once cleared funds have been received. It is our aim to get your order to you as quickly and seamlessly as possible with minimum fuss and maximum convenience. INTERNATIONAL: We ship to international destinations, please contact us for an international shipping quote. Occasionally orders may be delayed in the postal service, unfortunately this is beyond our control but we use our best endeavors to resolve any issues should they arise. Payment may be made by, PayPal, Visa, Mastercard, Bank Deposit, Efptos, or Cash on pick up. Goods may be returned up to 30 days after purchase. Returned Goods must be in original, un-used condition. Goods that have been used, installed, or damaged will not be accepted for return unless deemed faulty as a result of manufacturing defect. Postage costs are not refundable. All return postage costs are at the purchasers expense. Products are guaranteed and warranted free from manufactures defects in the material, workmanship or design for a period of 12 Months from the date of purchase. Repairs must carried out in accordance with OEM specifications. If you have any doubts of the correct application of this part please feel free to email or call us prior to purchasing. Inspections welcome at our Factory in Lilydale Factory 17/64-86 Beresford Rd Lilydale Vic 3140 Business Hours, See below Feel free to contact us on 1300 307 795 or email info@bluelpg.com
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.