+ Post new Ad
LOADED 765 W.A. WHITNEY 150-Ton Hydraulic Shear w/Dies: Angle Round Flat Channel, US $24,999.00 – Picture 0
LOADED 765 W.A. WHITNEY 150-Ton Hydraulic Shear w/Dies: Angle Round Flat Channel, US $24,999.00 – Picture 0

Loaded 765 W.a. Whitney 150-ton Hydraulic Shear W/dies: Angle Round Flat Channel

US $24,999.00

  • Hopkins, Minnesota, United States
  • Jan 30th
Open on mobile:
QR code
Removed from a shop that closed.  Under power when removed.  LOADED WITH TOOLING.  This is not just the framework of a machine.  There is tons of tooling to make the a complete shearing system.  Please call us if you have any questions or want to see the machine in person.  We have 96 total photos.  612.564.3726.   video youtube link   http://youtu.be/cHWrtY1lb2Y Whitney 765 Hydraulic Shear w/ Dies: Angle, Channel, Flat & Round 150 Ton Capacity 4-1/2" Stroke 3/4" Blades "injector" type tooling 2 to 10 second cycle time Hydraulic Unit Whitney Model 700-595 Serial No: 700-595-15433 30 HP 230/460 3-PH Tooling Includes: 765-168 Tool Carrier w/ tracks to hold up to 5 Die Assemblies 765-001 Angle Iron Die Assembly- Double Cut     Angle Iron: 8" x 8" x 3/4" in mild steel     Flat Stock: 8" x 3/4" in mild steel     Square Stock: 1-1/4" in mild steel     Square Hollow Tubing 3" Max (may need different blade) 765-002 Round Stock Die Assembly - Single Cut     2-1/2" Max Diameter for Hot Roll mild steel     2-1/2" Max Diameter for Cold Roll mild steel     Built with (3) Die Insert Holes         Hole "A" 1/4" thru 29/32"         Hole "B" 15/16 thru 1-5/16"         Hole "C" 1-3/8" thru 2-9/16" 765-003 Flat Stock Die Assembly - Double Cut     12" x 3/4" Max Flat Bar in mild steel 765-045 Channel Iron - Double Cut Die Assembly     Adjustable to 3" thru 10" Powered Infeed Conveyor Also includes Blades and Dies for the above Die Assemblies as shown.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Fully Tested. Watch the Video! Loads of Tooling Included!”

Directions

Similar products from Tools for Fabrication Equipment

100 Ton 11" Thrt Edwards 100 Ton Deluxe *Made in the USA* NEW IRONWORKER, Built-

100 Ton 11" Thrt Edwards 100 Ton Deluxe *Made in the USA* NEW IRONWORKER, Built-

  • Harrison, New Jersey, United States
  • Jan 30th
75 Ton 10" Thrt Edwards 75 Ton *Made in the USA* NEW IRONWORKER, Dedicated Coper

75 Ton 10" Thrt Edwards 75 Ton *Made in the USA* NEW IRONWORKER, Dedicated Coper

  • Harrison, New Jersey, United States
  • Jan 30th
65 Ton 9.75" Thrt Edwards 65 Ton *Made in the USA* NEW IRONWORKER, 5 station; 24

65 Ton 9.75" Thrt Edwards 65 Ton *Made in the USA* NEW IRONWORKER, 5 station; 24

  • Harrison, New Jersey, United States
  • Jan 30th
STANLEY U214A UNISHEAR NIBBLER SHEET METAL SHEAR 14 Gauge Used Vintage USA

STANLEY U214A UNISHEAR NIBBLER SHEET METAL SHEAR 14 Gauge Used Vintage USA

  • Rimrock, Arizona, United States
  • Jan 30th
Toledo 2" OBI Punch Press w/ 2 HP Kiemle 220/440 VAC Motor

Toledo 2" OBI Punch Press w/ 2 HP Kiemle 220/440 VAC Motor

  • Fleetwood, Pennsylvania, United States
  • Jan 30th
PEXTO BAR FOLDER # 63F / ROPER WHITNEY BRAKE DIACRO/TENNSMITH /NIAGRA NICE!

PEXTO BAR FOLDER # 63F / ROPER WHITNEY BRAKE DIACRO/TENNSMITH /NIAGRA NICE!

  • Fair Haven, New Jersey, United States
  • Jan 30th
PEXTO ROLLER 381-D 36" / ROPER WHITNEY DIACRO/TENNSMITH /NIAGRA NICE!

PEXTO ROLLER 381-D 36" / ROPER WHITNEY DIACRO/TENNSMITH /NIAGRA NICE!

  • Fair Haven, New Jersey, United States
  • Jan 30th
14" Press Brake w/Front guide plate & rear back stop - 20 ton capacity

14" Press Brake w/Front guide plate & rear back stop - 20 ton capacity

  • Stevensville, Montana, United States
  • Jan 30th
Nice OFFSET 764 W.A. WHITNEY 50-Ton Hydraulic Angle Shear with Tooling & Video

Nice OFFSET 764 W.A. WHITNEY 50-Ton Hydraulic Angle Shear with Tooling & Video

  • Hopkins, Minnesota, United States
  • Jan 30th
NICE 50-Ton 10" Roper Whitney C-Frame Portable Hydraulic Punch Bench Enerpac

NICE 50-Ton 10" Roper Whitney C-Frame Portable Hydraulic Punch Bench Enerpac

  • Hopkins, Minnesota, United States
  • Jan 30th
10 ft Sheet Metal Break Used

10 ft Sheet Metal Break Used

  • Mooresville, Indiana, United States
  • Jan 30th
Kling #4 Ironworker Shear Punch Coper Angle Round Square Holes 60 Ton Mech

Kling #4 Ironworker Shear Punch Coper Angle Round Square Holes 60 Ton Mech

  • Millstadt, Illinois, United States
  • Jan 30th
BLACKHAWK DEDICATED FIXTURE BENCH CONVERSION RACE CAR JIG

BLACKHAWK DEDICATED FIXTURE BENCH CONVERSION RACE CAR JIG

  • Mooresville, Indiana, United States
  • Jan 30th
Tin Snips Sheet Metal Cutting Shears Heavy Duty 17" L. WISS Business Industrial

Tin Snips Sheet Metal Cutting Shears Heavy Duty 17" L. WISS Business Industrial

  • Chicago, Illinois, United States
  • Jan 30th
WUKO 1006 Roof Seaming Machine

WUKO 1006 Roof Seaming Machine

  • Dallas, Georgia, United States
  • Jan 30th
Blanchard Ground Top Machine Base Fabrication Table Heavy Duty 33"x39"

Blanchard Ground Top Machine Base Fabrication Table Heavy Duty 33"x39"

  • Findlay, Ohio, United States
  • Jan 30th
NICE SET OF 37 HSS HI-DUTY LETTERS AND NUMBERS 1/8" WITH WOODEN BOXS

NICE SET OF 37 HSS HI-DUTY LETTERS AND NUMBERS 1/8" WITH WOODEN BOXS

  • Ellington, New York, United States
  • Jan 30th
NEWPORT ELECTRONICS INFINITY C PROGRAMMABLE DIGITAL RTD CONTROLLER INFCR-011

NEWPORT ELECTRONICS INFINITY C PROGRAMMABLE DIGITAL RTD CONTROLLER INFCR-011

  • Marietta, Georgia, United States
  • Jan 30th
60 Ton 8.875" Thrt Edwards 60 Ton *Made in the USA* NEW IRONWORKER, Dedicated Co

60 Ton 8.875" Thrt Edwards 60 Ton *Made in the USA* NEW IRONWORKER, Dedicated Co

  • Harrison, New Jersey, United States
  • Jan 30th
55 Ton 7.5" Thrt Edwards 55 Ton *Made in the USA* NEW IRONWORKER, Universal Open

55 Ton 7.5" Thrt Edwards 55 Ton *Made in the USA* NEW IRONWORKER, Universal Open

  • Harrison, New Jersey, United States
  • Jan 30th

People who viewed this item also vieved

8 WILIAMS LATHE DOGS 3/4" #3

8 WILIAMS LATHE DOGS 3/4" #3

  • Ellington, New York, United States
  • Jan 30th
Lodge & Shipley lathe 22 x 96

Lodge & Shipley lathe 22 x 96

  • Amanda, Ohio, United States
  • Jan 30th
LOT OF 8 1" SHANK INDEXABLE TOOL HOLDERS KENNAMETAL SANDVIK

LOT OF 8 1" SHANK INDEXABLE TOOL HOLDERS KENNAMETAL SANDVIK

  • Ellington, New York, United States
  • Jan 30th
NMTB50 3/4" END MILL HOLDER STK 1158

NMTB50 3/4" END MILL HOLDER STK 1158

  • Wadley, Alabama, United States
  • Jan 30th
Doall / Anayak 40 taper 12x59" Vertical Milling Machine with Powerfeeds

Doall / Anayak 40 taper 12x59" Vertical Milling Machine with Powerfeeds

  • Matawan, New Jersey, United States
  • Jan 30th
SANDVIK A316-25SM550-10015P 1030 Exchangeable Head

SANDVIK A316-25SM550-10015P 1030 Exchangeable Head

  • Windsor, Connecticut, United States
  • Jan 30th
HARIG AIR FLOW FIXTURE w/EXTRA SPINDLE *

HARIG AIR FLOW FIXTURE w/EXTRA SPINDLE *

  • Edison, New Jersey, United States
  • Feb 17th
Dumore Series 57 Tool Post Grinder 3/4HP 57-031 8521 Internal Grinding Kit

Dumore Series 57 Tool Post Grinder 3/4HP 57-031 8521 Internal Grinding Kit

  • Vancouver, Washington, United States
  • Feb 17th
Acra ASG-1020HS 3-Axis Reciprocating Hydraulic Automatic Surface Grinder

Acra ASG-1020HS 3-Axis Reciprocating Hydraulic Automatic Surface Grinder

  • Santa Ana, California, United States
  • Feb 17th
dotco 90-degree angle drill aircraft tool(small body)

dotco 90-degree angle drill aircraft tool(small body)

  • Walled Lake, Michigan, United States
  • Feb 22nd
Recoil Kit 33056 Unc 5/16-18 Master Thread Repair Kit

Recoil Kit 33056 Unc 5/16-18 Master Thread Repair Kit

  • Sacramento, California, United States
  • Feb 22nd
Recoil Kit 33106 Unc 5/8-11 Master Thread Repair Kit

Recoil Kit 33106 Unc 5/8-11 Master Thread Repair Kit

  • Sacramento, California, United States
  • Feb 22nd
Central Pneumatic 1/2" Air Impact Wrench

Central Pneumatic 1/2" Air Impact Wrench

  • Harrisonville, Missouri, United States
  • Feb 22nd
W. Rose Brick Trowel 10" Wide London Pattern w/ProForm Handle (4)

W. Rose Brick Trowel 10" Wide London Pattern w/ProForm Handle (4)

  • Byron Center, Michigan, United States
  • Feb 22nd
W. Rose Brick Trowel 10-1/2" Wide London Pattern w/ProForm Handle

W. Rose Brick Trowel 10-1/2" Wide London Pattern w/ProForm Handle

  • Byron Center, Michigan, United States
  • Feb 22nd
SUNNEN HONE MANDREL WITH ADAPTOR AK20-681AH STK2436

SUNNEN HONE MANDREL WITH ADAPTOR AK20-681AH STK2436

  • Wadley, Alabama, United States
  • Feb 26th
SUNNEN HONE MANDREL WITH ADAPTOR AK20-869UB STK2435

SUNNEN HONE MANDREL WITH ADAPTOR AK20-869UB STK2435

  • Wadley, Alabama, United States
  • Feb 26th
SUNNEN HONE MANDREL WITH ADAPTOR AK20-900UC STK2434

SUNNEN HONE MANDREL WITH ADAPTOR AK20-900UC STK2434

  • Wadley, Alabama, United States
  • Feb 26th
CERATIP CARBIDE INSERTS TPGE 731 0248E ,9 PIECES 013015M9

CERATIP CARBIDE INSERTS TPGE 731 0248E ,9 PIECES 013015M9

  • Fox Lake, Illinois, United States
  • Mar 6th
NEWCOMER CARBIDE INSERTS CNMG - 432A NP94 ,4 PIECES 013015M8

NEWCOMER CARBIDE INSERTS CNMG - 432A NP94 ,4 PIECES 013015M8

  • Fox Lake, Illinois, United States
  • Mar 6th
VALENITE CARBIDE INSERTS VC 55 MM SD 322P,10 PIECES 013015M7

VALENITE CARBIDE INSERTS VC 55 MM SD 322P,10 PIECES 013015M7

  • Fox Lake, Illinois, United States
  • Mar 6th
Erowa ITS System ER-009214 w/ Holder FH11

Erowa ITS System ER-009214 w/ Holder FH11

  • Bloomfield, Connecticut, United States
  • Mar 29th
Erowa ITS System ER-009214 w/ Holder FH10

Erowa ITS System ER-009214 w/ Holder FH10

  • Bloomfield, Connecticut, United States
  • Mar 29th
EDM Holder Mount-Makino

EDM Holder Mount-Makino

  • Cedar Grove, Wisconsin, United States
  • Apr 22nd
8” Roll - In Universal Band Saw, Model EF 1459, Runs Well

8” Roll - In Universal Band Saw, Model EF 1459, Runs Well

  • Somerville, New Jersey, United States
  • May 21st
#9382: Hyd Mech H12 Horizontal Automatic Bandsaw- Fabrication Equipment

#9382: Hyd Mech H12 Horizontal Automatic Bandsaw- Fabrication Equipment

  • Orange City, Iowa, United States
  • May 21st
#9368: W.F. Wells Bandsaw- Fabrication Equipment F-16-2A Used

#9368: W.F. Wells Bandsaw- Fabrication Equipment F-16-2A Used

  • Orange City, Iowa, United States
  • May 22nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies