Linear Gate Opener Remote Radio Receiver AM-RRR ACP00500, US $85.00 – Picture 0

Linear Gate Opener Remote Radio Receiver AM-RRR ACP00500, US $85.00 – Picture 1

Linear Gate Opener Remote Radio Receiver Am-rrr Acp00500

US $85.00

Imperial Beach, California, United States
Jun 9th

Open on mobile:
QR code

Linear AM-RRR Gate Opener Remote Radio Receiver Product Number: ACP00500 The Model AM-RRR Remote Radio Receiver is designed for use with Linear's access control systems. The AM-RRR functions as a remote device that extends the radio range or supplies localized radio reception. Three antenna types can be used with this receiver. The cabinet mounted type F connector is for connection to the antenna. The local whip antenna (supplied) screws directly on to the receiver's connector. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas wire to the receiver's antenna connector with type RG-59 cable. An on-board RADIO RANGE knob allows adjustment of the receiver's gain. It can be set to limit the maximum radio range that the receiver can achieve. Two indicators display the receivers performance and operation. The two color red/green STATUS indicator lights red when the receiver is getting DC power and turns green when access is granted to a transmitter. The RADIO indicator lights when the receiver detects a radio signal. It can be used for trouble shooting and verifying system performance. Receiver test points are provided for listening to the incoming signals. The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors. Gaskets and a weather-tight wiring strain relief seal the unit from the elements. Features: Provides extended range for radio-based access control system Up to 500 foot radius radio coverage Weather-resistant housing for outside or indoor mounting Optional directional remote or omnidirectional remote antennas Integral radio gain control for adjustment of radio range 2-color status LEDs indicates "power on" and "access granted" Radio LED detects transmission Power supplied by access controller Low voltage cable allows remote mounting without signal loss RF frequency: 318 MHz 4.25" W x 6.25" H x 2.5" D (without antenna) General Specifications Power: Supplied by access controller, six-wire connection Indication: Red/green LED turns red for DC power from controller, turns green when access is granted to a transmitter; radio LED lights when the receiver detects a radio signal Gain Adjustment: Radio range knob for setting maximum radio range Antennas: 9-1/2 in whip antenna with F-connector (supplied); optional remote directional EXA-2000 or remote omni-directional EXA-1000 antenna, wiring with type RG-59 cable to receiver's connector Wiring: Up to 300 feet, BELDEN 9931 or equivalent (24 AWG); up to 500 feet, WEICO 9405 or equivalent (20 AWG) Item is in good physical condition.