+ Post new Ad
Kastalon HV91M36 Stop Guide, US $16.25 – Picture 0
Kastalon HV91M36 Stop Guide, US $16.25 – Picture 0

Kastalon Hv91m36 Stop Guide

US $16.25

  • Peoria, Illinois, United States
  • Jan 30th
Open on mobile:
QR code
07   40000 57800     39B                           Please email any questions or requests for additional pictures before purchasing. Used for Stumper or Paletizer  Length: 6" Width : 1" Height : 3" (2) Adapting Holes 3/8"   This item is surplus stock in like new condition.   International Buyers – Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such practices.

Directions

Similar products from Supporting Blocks & Sets

Lot of 3 Kastalon RG4000043194 Gripper Pads

Lot of 3 Kastalon RG4000043194 Gripper Pads

  • Peoria, Illinois, United States
  • Jan 30th
ABS IMPORT - 1/8 X 6" LONG PRECISION PARALLEL SET - P/N # 3900-3010

ABS IMPORT - 1/8 X 6" LONG PRECISION PARALLEL SET - P/N # 3900-3010

  • Elyria, Ohio, United States
  • Jan 30th
Mitutoyo 10006 0 Angle Block, +/- 20 sec Accuracy, 4 Degree

Mitutoyo 10006 0 Angle Block, +/- 20 sec Accuracy, 4 Degree

  • Jamaica, New York, United States
  • Jan 30th
Mitutoyo 10001 0 Angle Block, +/- 20 sec Accuracy, 1/4 Degree

Mitutoyo 10001 0 Angle Block, +/- 20 sec Accuracy, 1/4 Degree

  • Jamaica, New York, United States
  • Jan 30th
Mitutoyo 10011 0 Angle Block, +/- 20 sec Accuracy, 25 Degree

Mitutoyo 10011 0 Angle Block, +/- 20 sec Accuracy, 25 Degree

  • Jamaica, New York, United States
  • Jan 30th
Mitutoyo 10012 0 Angle Block, +/- 20 sec Accuracy, 30 Degree

Mitutoyo 10012 0 Angle Block, +/- 20 sec Accuracy, 30 Degree

  • Jamaica, New York, United States
  • Jan 30th
Picador UK 7PC group of Milling CLAMP BLOCK SET 4 MYFORD LATHE

Picador UK 7PC group of Milling CLAMP BLOCK SET 4 MYFORD LATHE

  • Perth, Ontario, Canada
  • Jan 30th
Starrett No. 568 Machinist V BLOCK 3/8"-16 EM1

Starrett No. 568 Machinist V BLOCK 3/8"-16 EM1

  • Bloomfield, Connecticut, United States
  • Jan 30th
181-921 mitutoyo v-blocks and clamps matched pair 2" capacity

181-921 mitutoyo v-blocks and clamps matched pair 2" capacity

  • Chicago, Illinois, United States
  • Jan 30th
Brown & Sharp 640 "22" Blade Thickness Gage Set With Box

Brown & Sharp 640 "22" Blade Thickness Gage Set With Box

  • Elmhurst, Illinois, United States
  • Jan 30th
USED ISCAR TOOL BLOCK FOR HEAVY-DUTY PARTING GROOVING BLADE SGTBK 38-9

USED ISCAR TOOL BLOCK FOR HEAVY-DUTY PARTING GROOVING BLADE SGTBK 38-9

  • Fairfield, Iowa, United States
  • Jan 30th
Precision Machinist Set-up Block Step Block 2 x 2 1/4 x 2

Precision Machinist Set-up Block Step Block 2 x 2 1/4 x 2

  • DeKalb, Illinois, United States
  • Jan 30th
Precision Machinist V-block with clamp Starrett No.567 1.88 x 1.88 x 3.5 in

Precision Machinist V-block with clamp Starrett No.567 1.88 x 1.88 x 3.5 in

  • DeKalb, Illinois, United States
  • Jan 30th
Precision Machinist Set-up block. 3 1/4 x 4 x 2

Precision Machinist Set-up block. 3 1/4 x 4 x 2

  • DeKalb, Illinois, United States
  • Jan 30th
New KBC Tools 5MP Magnet V-Block 2 Pack

New KBC Tools 5MP Magnet V-Block 2 Pack

  • Canton, Michigan, United States
  • Jan 30th
45 Degree Steel Angle Block (Inv.29998)

45 Degree Steel Angle Block (Inv.29998)

  • Portland, Connecticut, United States
  • Jan 30th
Tietzmann Co. No. 2 Machinist Hardened Step Blocks (2 Sets-4 Pieces)

Tietzmann Co. No. 2 Machinist Hardened Step Blocks (2 Sets-4 Pieces)

  • Wheatland, Pennsylvania, United States
  • Jan 30th
Tietzmann Co. No. 3 Machinist Hardened Step Blocks (2 Sets-4 Pieces)

Tietzmann Co. No. 3 Machinist Hardened Step Blocks (2 Sets-4 Pieces)

  • Wheatland, Pennsylvania, United States
  • Jan 30th
Mitutoyo 181-904 V BLOCKS & CLAMPS SET 2 inch, Machinist vblock

Mitutoyo 181-904 V BLOCKS & CLAMPS SET 2 inch, Machinist vblock

  • Santa Clara, California, United States
  • Jan 30th
Angle Block Set Minimum Angle 1 degree Max Angle 30 Degrees 10 Pcs Steel |GR4|

Angle Block Set Minimum Angle 1 degree Max Angle 30 Degrees 10 Pcs Steel |GR4|

  • Saint Louis, Missouri, United States
  • Jan 30th

People who viewed this item also vieved

Adjustable Sliding/Angle Fixturing Block 4-1/4 x 3 inch with 2 x 3/4 inch slot

Adjustable Sliding/Angle Fixturing Block 4-1/4 x 3 inch with 2 x 3/4 inch slot

  • Palos Hills, Illinois, United States
  • May 31st
208" x 36"x 8" Steel Acorn Welding T-Slot Table Cast Iron Layout Plate Fixture

208" x 36"x 8" Steel Acorn Welding T-Slot Table Cast Iron Layout Plate Fixture

  • Grand Rapids, Michigan, United States
  • May 31st
35.375" x 16.125" x 5" Steel Weld T-Slot Table Cast iron Layout Plate Fixture

35.375" x 16.125" x 5" Steel Weld T-Slot Table Cast iron Layout Plate Fixture

  • Grand Rapids, Michigan, United States
  • May 31st
NICE LOT OF 2MT DEAD CENTER W. 2MT EXTENSION 2MT ADJUSTABLE REAMER 1 1/8 1 1/4

NICE LOT OF 2MT DEAD CENTER W. 2MT EXTENSION 2MT ADJUSTABLE REAMER 1 1/8 1 1/4

  • Pomona, California, United States
  • Jun 2nd
NICE ROHM 2MT LIVE CENTER MK2

NICE ROHM 2MT LIVE CENTER MK2

  • Pomona, California, United States
  • Jun 2nd
MACHINIST LATHE MILL Machinist for Schaublin Lathe Rotor Live Center C SV 102

MACHINIST LATHE MILL Machinist for Schaublin Lathe Rotor Live Center C SV 102

  • Morris Plains, New Jersey, United States
  • Jun 2nd
LYNDEX B3506-1000 1" - 3.50" END MILL HOLDER

LYNDEX B3506-1000 1" - 3.50" END MILL HOLDER

  • Chicago, Illinois, United States
  • Jun 2nd
LOT OF HARDINGE 5DS 5C COLLET STOPS

LOT OF HARDINGE 5DS 5C COLLET STOPS

  • California, United States
  • Jun 2nd
HARDINGE 5C 1/16" ROUND COLLET STK 7519

HARDINGE 5C 1/16" ROUND COLLET STK 7519

  • Wadley, Alabama, United States
  • Jun 2nd
Manchester 435157 Clamps for Indexables Type: Clamp Series: Separator

Manchester 435157 Clamps for Indexables Type: Clamp Series: Separator

  • New Bedford, Massachusetts, United States
  • Jun 3rd
Shaft Clamp Collars Threaded 2-12 x 3"OD x 11/16"w Black Oxide

Shaft Clamp Collars Threaded 2-12 x 3"OD x 11/16"w Black Oxide

  • New Bedford, Massachusetts, United States
  • Jun 3rd
Gibraltar Carbon Steel Pull Action Latch Clamp 4000 lb Capacity GIB-LU-404-1

Gibraltar Carbon Steel Pull Action Latch Clamp 4000 lb Capacity GIB-LU-404-1

  • Venice, Florida, United States
  • Jun 3rd
9 inch 3 jaw chuck

9 inch 3 jaw chuck

  • Grass Lake, Michigan, United States
  • Jun 4th
Interstate Manual Lathe Chuck 8" 3 Jaw Self Centering Plain Back 4D

Interstate Manual Lathe Chuck 8" 3 Jaw Self Centering Plain Back 4D

  • Saint Louis, Missouri, United States
  • Jun 4th
Suburban Tool V-Block 4x3x3 (USED)

Suburban Tool V-Block 4x3x3 (USED)

  • Long Island City, New York, United States
  • Jun 4th
Jacob # 75 Machinist Cross Slide Drill Press Milling Machine Vise

Jacob # 75 Machinist Cross Slide Drill Press Milling Machine Vise

  • Cary, North Carolina, United States
  • Jun 5th
Sears Craftsman Tilting Drill Press Milling Machine Vise

Sears Craftsman Tilting Drill Press Milling Machine Vise

  • Cary, North Carolina, United States
  • Jun 5th
Machinist Cross Slide Vise

Machinist Cross Slide Vise

  • Temecula, California, United States
  • Jun 5th
"Karbonz Fixed Circular Needles 16""-Size 1.5/2.5mm"

"Karbonz Fixed Circular Needles 16""-Size 1.5/2.5mm"

  • Hickory Hills, Illinois, United States
  • Jun 20th
South Bend Heavy 10 5-c collet closer, rack, handwheel, hardinge collets AWESOME

South Bend Heavy 10 5-c collet closer, rack, handwheel, hardinge collets AWESOME

  • Lebanon, Pennsylvania, United States
  • Jun 20th
"Nova Platina Double Pointed Needles 8""-Size 3/3.25mm"

"Nova Platina Double Pointed Needles 8""-Size 3/3.25mm"

  • Hickory Hills, Illinois, United States
  • Jun 20th
100w Co2 Laser Engraver 1000mm/S Rotary Axis 3-Jaw Usb Disk Cutting A-Axis

100w Co2 Laser Engraver 1000mm/S Rotary Axis 3-Jaw Usb Disk Cutting A-Axis

  • Ontario, California, United States
  • Oct 19th
Precision Indexer Rotary Table 3 Jaw Chuck Vertical & Horizontal 8" milling mach

Precision Indexer Rotary Table 3 Jaw Chuck Vertical & Horizontal 8" milling mach

  • Temple City, California, United States
  • Oct 20th
NICE Haas 5C 4th Axis CNC Rotary Indexer with S5C Controller 17-Pin, Air Closer

NICE Haas 5C 4th Axis CNC Rotary Indexer with S5C Controller 17-Pin, Air Closer

  • Hopkins, Minnesota, United States
  • Oct 20th
Machine Tool Parts (Bearings)

Machine Tool Parts (Bearings)

  • Arlington Heights, Illinois, United States
  • Oct 23rd
kitagawa Hydraulic Cylinder Actuator F0827 Refurbished Unit-With Exchange $900

kitagawa Hydraulic Cylinder Actuator F0827 Refurbished Unit-With Exchange $900

  • Lake Elsinore, California, United States
  • Oct 24th
machinist tools

machinist tools

  • Ventura, California, United States
  • Oct 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies