+ Post new Ad
Jacobs Chuck 0085403 NMTB 30 Shell Face Mill Tool Holder 1-1/4" 1/2" W12, US $161.30 – Picture 0
Jacobs Chuck 0085403 NMTB 30 Shell Face Mill Tool Holder 1-1/4" 1/2" W12, US $161.30 – Picture 0

Jacobs Chuck 0085403 Nmtb 30 Shell Face Mill Tool Holder 1-1/4" 1/2" W12

US $161.30

  • Wichita, Kansas, United States
  • Jan 30th
Open on mobile:
QR code
Jacobs Chuck 0085403 NMTB 30 Shell/ Face Mill Tool Holder 1-1/4-Inch Diameter with 1/2-Inch W12 Thread Technical Details Balanced to 8,000 RPM Provides more accurate, rigid tool holder-to-spindle mount tapers Taper grounded to AT3 or better Easy change/setup and low maintenance Through spindle coolant   Product Description From the Manufacturer The Jacobs NMTB 30 Shell/Face mill tool holder is designed to hold up to a 1.25-Inch shank cutting tool. The Jacobs NMTB 30 Shell/Face mill tool holder is prebalanced to 8,000 RPM. The Jacobs NMTB 30 Shell/Face mill tool holder is designed for heavy duty cutting and face milling. The Jacobs NMTB 30 Shell/Face mill tool holder provides more accurate, rigid tool holder-to-spindle mount tapers. The taper is grounded to AT3. Easy changes and setup make the NMTB 30 Shell/Face mill tool holder a low maintenance product. The through spindle coolant is standard for Jacobs Shell/Face mill tool holders and the Jacobs NMTB 30 Shell/Face mill tool holder comes with a one year factory warranty   AllJacobs Chuck Tool Holders are new and factory sealed.  Each tool ships in the reusable protective tool holder capsule for storing when not in use.    Accessories and Tightening Wrench not included, unless otherwise stated. Can Be Purchased Locally

Directions

Similar products from BT Tool Holders

Jacobs Chuck 0065160 ISO 529/ 2283 Clutch Tap Collet 1, M10 8.0mm 6.3mm Drive

Jacobs Chuck 0065160 ISO 529/ 2283 Clutch Tap Collet 1, M10 8.0mm 6.3mm Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0067311 CAT V 40 Tension/Compression Tap Holder 3 M14 to M36 73mm

Jacobs Chuck 0067311 CAT V 40 Tension/Compression Tap Holder 3 M14 to M36 73mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 30544 JKB 160 - 50 3.0 - 16.0mm High Torque Precision Keyless Chuck BT 50

Jacobs 30544 JKB 160 - 50 3.0 - 16.0mm High Torque Precision Keyless Chuck BT 50

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0085215 CAT V 50 Shell/ Face Mill Tool Holder 1" Dia. 2" Projection

Jacobs Chuck 0085215 CAT V 50 Shell/ Face Mill Tool Holder 1" Dia. 2" Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065142 DIN 376 Clutch Tapping Collet 2, M16 12.0mm 9.0mm

Jacobs Chuck 0065142 DIN 376 Clutch Tapping Collet 2, M16 12.0mm 9.0mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0083534 BT 50 End Mill Tool Holder 50mm Diameter 120mm Projection

Jacobs Chuck 0083534 BT 50 End Mill Tool Holder 50mm Diameter 120mm Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0085151 BT 50 Shell/ Face Mill Tool Holder 40mm Diameter 50mm Proj

Jacobs Chuck 0085151 BT 50 Shell/ Face Mill Tool Holder 40mm Diameter 50mm Proj

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 0080730 CAT V 40 ER 32 Tool Holder with 8-Inch Projection e

Jacobs 0080730 CAT V 40 ER 32 Tool Holder with 8-Inch Projection e

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0080722-51FC CAT V 40 ER 20 Tool Holder B (DIN B) Flange Coolant 6"

Jacobs Chuck 0080722-51FC CAT V 40 ER 20 Tool Holder B (DIN B) Flange Coolant 6"

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065652 DIN 376 Rigid Tap Collet 3, M33 25.0mm Shank 20.0mm

Jacobs Chuck 0065652 DIN 376 Rigid Tap Collet 3, M33 25.0mm Shank 20.0mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 0066110 BT 40 Rigid Tap Holder, Size 2 Tap M8 - M24 Pre-Balanced to 6K

Jacobs 0066110 BT 40 Rigid Tap Holder, Size 2 Tap M8 - M24 Pre-Balanced to 6K

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0083558 CAT V 50 End Mill Tool Holder 1-1/2" DiA 4-3/5" Projection

Jacobs Chuck 0083558 CAT V 50 End Mill Tool Holder 1-1/2" DiA 4-3/5" Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 0065164 ISO 529/ 2283 Tapping Collet #2 Tap M14 11.2 MM Shank 9.0 MM

Jacobs 0065164 ISO 529/ 2283 Tapping Collet #2 Tap M14 11.2 MM Shank 9.0 MM

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065442 DIN 371 Rigid Tap Collet 1 M4 2.8mm Shank 2.1mm Drive

Jacobs Chuck 0065442 DIN 371 Rigid Tap Collet 1 M4 2.8mm Shank 2.1mm Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065432 DIN 371 Rigid Tap Collet 1 M10 10.0mm Shank 8.0mm Drive

Jacobs Chuck 0065432 DIN 371 Rigid Tap Collet 1 M10 10.0mm Shank 8.0mm Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0080633 BT 40 ER 40 Tool Holder with 120mm Projection e

Jacobs Chuck 0080633 BT 40 ER 40 Tool Holder with 120mm Projection e

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065225 DIN 371 Clutch Tapping Collet 1 M3 3.5mm Shank 2.7mm

Jacobs Chuck 0065225 DIN 371 Clutch Tapping Collet 1 M3 3.5mm Shank 2.7mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 0065231 DIN 371 Clutch Tap Collet No.1 M8 8.0mm & 6.2mm Drive Square

Jacobs 0065231 DIN 371 Clutch Tap Collet No.1 M8 8.0mm & 6.2mm Drive Square

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0080281-04 1-1/4-Inch Milling Chuck Collet with 14mm Diameter e

Jacobs Chuck 0080281-04 1-1/4-Inch Milling Chuck Collet with 14mm Diameter e

  • Wichita, Kansas, United States
  • Jan 30th
1-1/4"-60 BT40 SHELL MILL HOLDER

1-1/4"-60 BT40 SHELL MILL HOLDER

  • Newington, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

VALENITE CAT40 3/4" ENDMILL HOLDER V40CT-E75 CAT 40 END MILL LOT C11663

VALENITE CAT40 3/4" ENDMILL HOLDER V40CT-E75 CAT 40 END MILL LOT C11663

  • Dayton, Ohio, United States
  • Mar 1st
KENNAMETAL CAT40 3/4" ENDMILL HOLDER CV40EM075375 CAT 40 END MILL LOT C11674

KENNAMETAL CAT40 3/4" ENDMILL HOLDER CV40EM075375 CAT 40 END MILL LOT C11674

  • Dayton, Ohio, United States
  • Mar 1st
VALENITE VARI SET BORING TENTHSET ADJUSTABLE CNC BORING BAR W/ 3/4" SHANK

VALENITE VARI SET BORING TENTHSET ADJUSTABLE CNC BORING BAR W/ 3/4" SHANK

  • Chino, California, United States
  • Mar 6th
HERTEL .800" INDEXABLE HBBS S750R COOLANT CNC BORING TURNING BAR W/ 3/4" SHANK

HERTEL .800" INDEXABLE HBBS S750R COOLANT CNC BORING TURNING BAR W/ 3/4" SHANK

  • Chino, California, United States
  • Mar 6th
Akko S20R SVUBR 11 for VBMT 1103.. Boring Bar 93° degrees

Akko S20R SVUBR 11 for VBMT 1103.. Boring Bar 93° degrees

  • Denizli,,TUR, Turkey
  • Mar 8th
Akko A20P SCLCR 09 for CCMT 09T3.. Coolant Boring Bar 95° degrees

Akko A20P SCLCR 09 for CCMT 09T3.. Coolant Boring Bar 95° degrees

  • Denizli,,TUR, Turkey
  • Mar 8th
CAL-HAWK 1/4" ARBOR ADAPTER CZCWA

CAL-HAWK 1/4" ARBOR ADAPTER CZCWA

  • Tacoma, Washington, United States
  • Mar 9th
Milwaukee Large Quick Change Arbor 1 1/4" / 6 7/8" / 32-175mm 49-56-7240

Milwaukee Large Quick Change Arbor 1 1/4" / 6 7/8" / 32-175mm 49-56-7240

  • Alpharetta, Georgia, United States
  • Mar 9th
WILERSON ELECTRONIC DRAIN X17-02-000 - 300 PSIG - 115 VAC - NEMA 4 - NEW

WILERSON ELECTRONIC DRAIN X17-02-000 - 300 PSIG - 115 VAC - NEMA 4 - NEW

  • Glasgow, Kentucky, United States
  • Mar 10th
GLOBAL CNC LATHE TOOL HOLDER BUSHING 1-1/4 X 5/8 #8612B STYLE B STK 2551

GLOBAL CNC LATHE TOOL HOLDER BUSHING 1-1/4 X 5/8 #8612B STYLE B STK 2551

  • Wadley, Alabama, United States
  • Mar 10th
ENCO TURNING TOOL HOLDER 1/4 LEFT / 250-1352

ENCO TURNING TOOL HOLDER 1/4 LEFT / 250-1352

  • Anaheim, California, United States
  • May 4th
Universal Kwik-Switch #AF80237 3/4" AF Collet Chuck

Universal Kwik-Switch #AF80237 3/4" AF Collet Chuck

  • Garden City, Idaho, United States
  • May 4th
VINTAGE WAHLSTROM 28-8 KEYLESS DRILL CHUCK. American Foundry

VINTAGE WAHLSTROM 28-8 KEYLESS DRILL CHUCK. American Foundry

  • Bellmawr, New Jersey, United States
  • May 29th
R8 TO JACOBS TAPER #2 DRILL CHUCK ARBOR STK 2753

R8 TO JACOBS TAPER #2 DRILL CHUCK ARBOR STK 2753

  • Wadley, Alabama, United States
  • May 29th
Quick Change BXA #1XL Tool Post OVERSIZE (3/4") Turning Facing Holder 250-201 XL

Quick Change BXA #1XL Tool Post OVERSIZE (3/4") Turning Facing Holder 250-201 XL

  • Rainbow City, Alabama, United States
  • May 30th
Kwik Switch 300 #80851 1.25" End Mill Holder

Kwik Switch 300 #80851 1.25" End Mill Holder

  • Cincinnati, Ohio, United States
  • May 30th
AVDEL, BRIV 3/16 MANDREL STD LGTH, #2 OS DIAMETER

AVDEL, BRIV 3/16 MANDREL STD LGTH, #2 OS DIAMETER

  • Farmingdale, New York, United States
  • Jun 1st
Interstate 1-1/2"-2" Expanding 5" Mandrel Sleeve

Interstate 1-1/2"-2" Expanding 5" Mandrel Sleeve

  • Venice, Florida, United States
  • Jun 1st
GRINDING SPINDLE MOUNT FOR 3-1/2 OD SPINDLES (W3)

GRINDING SPINDLE MOUNT FOR 3-1/2 OD SPINDLES (W3)

  • Mitchell, Indiana, United States
  • Jun 9th
Cooling Water Pipe Mist Spray Injection Cooling for Accessories Carving kit

Cooling Water Pipe Mist Spray Injection Cooling for Accessories Carving kit

  • shaoxing Zhejiang, China
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies