+ Post new Ad
Jacobs 0083525 BT 50 End Mill Tool Holder 10MM 63MM Pre-Balanced To 15KRPM, US $180.34 – Picture 0
Jacobs 0083525 BT 50 End Mill Tool Holder 10MM 63MM Pre-Balanced To 15KRPM, US $180.34 – Picture 0

Jacobs 0083525 Bt 50 End Mill Tool Holder 10mm 63mm Pre-balanced To 15krpm

US $180.34

  • Wichita, Kansas, United States
  • Jan 30th
Open on mobile:
QR code
Jacobs 0083525  BT 50 End Mill Tool Holder 10MM With 63MM Projection. Pre-Balanced To 15,000 RPM Technical Details Provides more accurate, rigid toolholder-to-spindle mount tapers. Taper grounded to AT3. Easy change and setup, low maintenance. Through Spindle coolant is standard for Jacobs End Mill Tool Holders.   Product Description From the Manufacturer The Jacobs BT 50 End Mill Tool Holder is designed to hold up to a 10 mm shank cutting tool. It has 63 mm projection and is prebalanced to 15,000 RPM. The Jacobs BT 50 End Mill Tool Holder is used for heavy duty cutting and general milling. The Jacobs BT 50 End Mill Tool Holder is able to provide more accurate, rigid toolholder-to-spindle mount tapers. The taper is grounded to AT3. Easy changes and set-ups makes the Jacobs BT 50 End Mill Tool Holder a low maintenance product. The Through Spindle coolant is standard for all Jacobs End Mill Tool Holders and the Jacobs BT 50 End Mill Tool Holder comes with a one year factory warranty.   AllJacobs Chuck Tool Holders are new and factory sealed.  Each tool ships in the reusable protective tool holder capsule for storing when not in use.   Accessories and Tightening Wrench not included, unless otherwise stated. Can Be Purchased Locally

Directions

Similar products from BT Tool Holders

Jacobs Chuck 0080281-01 1-1/4-Inch Milling Chuck Collet with 8mm Diameter

Jacobs Chuck 0080281-01 1-1/4-Inch Milling Chuck Collet with 8mm Diameter

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065491 ANSI TAP Rigid Collet System 1 12 Capacity, 2/9" 1/6" Drive

Jacobs Chuck 0065491 ANSI TAP Rigid Collet System 1 12 Capacity, 2/9" 1/6" Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0066321 BT 50 Tension Compression Holder Size M14 - M36 251.8mm

Jacobs Chuck 0066321 BT 50 Tension Compression Holder Size M14 - M36 251.8mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065183 ANSI TAP Clutch Collet 2 1/2" Capacity 3/8" 2/7" Drive

Jacobs Chuck 0065183 ANSI TAP Clutch Collet 2 1/2" Capacity 3/8" 2/7" Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0085226 CAT V 50 Shell Face Mill Tool Holder 2" Dia 4" Projection

Jacobs Chuck 0085226 CAT V 50 Shell Face Mill Tool Holder 2" Dia 4" Projection

  • Wichita, Kansas, United States
  • Jan 30th
Kennametal KM40PCLNL5

Kennametal KM40PCLNL5

  • Charlotte, North Carolina, United States
  • Jan 30th
Jacobs Chuck 0085115 BT 50 Shell Face Mill Tool Holder 1 1/4" Diameter with 6"

Jacobs Chuck 0085115 BT 50 Shell Face Mill Tool Holder 1 1/4" Diameter with 6"

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0064001 VDI 20 Hold In One Tool Holder with 0 to 8mm Capacity

Jacobs Chuck 0064001 VDI 20 Hold In One Tool Holder with 0 to 8mm Capacity

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0083551 CAT V 50 End Mill Tool Holder 3/8" Dia 4" Projection

Jacobs Chuck 0083551 CAT V 50 End Mill Tool Holder 3/8" Dia 4" Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 83611 HSK 100A 20mm Diameter End Mill Tool Holder with 100mm Projection

Jacobs 83611 HSK 100A 20mm Diameter End Mill Tool Holder with 100mm Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs 0065229 DIN 371 Type Tapping Collet 1 M5 6.0 MM 4.0 MM Drive Square

Jacobs 0065229 DIN 371 Type Tapping Collet 1 M5 6.0 MM 4.0 MM Drive Square

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065258 DIN 376 Clutch Tapping Collet 1 T M14 11.0mm 9.0mm Drive

Jacobs Chuck 0065258 DIN 376 Clutch Tapping Collet 1 T M14 11.0mm 9.0mm Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0080226 BT 50 Milling Chuck 42mm Diameter w/ 135mm Projection

Jacobs Chuck 0080226 BT 50 Milling Chuck 42mm Diameter w/ 135mm Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065170 ISO 529/ 2283 Clutch Tap Collet 2 M20 14.0mm 11.2mm Drive

Jacobs Chuck 0065170 ISO 529/ 2283 Clutch Tap Collet 2 M20 14.0mm 11.2mm Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065286 ISO 529/2283 Clutch Type Tapping Collet 1 M14 11.2mm 9.0mm

Jacobs Chuck 0065286 ISO 529/2283 Clutch Type Tapping Collet 1 M14 11.2mm 9.0mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0080281-05 1-1/4-Inch Milling Chuck Collet with 16mm Diameter

Jacobs Chuck 0080281-05 1-1/4-Inch Milling Chuck Collet with 16mm Diameter

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0083581 SK 50 End Mill Tool Holder 40mm Dia 100mm Projection

Jacobs Chuck 0083581 SK 50 End Mill Tool Holder 40mm Dia 100mm Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0083663 NMTB 50 End Mill Tool Holder 16mm Dia. 60mm Projection

Jacobs Chuck 0083663 NMTB 50 End Mill Tool Holder 16mm Dia. 60mm Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0081248 BT 30 Ground Thread Pull Stud with 90 Degree e

Jacobs Chuck 0081248 BT 30 Ground Thread Pull Stud with 90 Degree e

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0066320 BT 50 Rigid Tap Holder 3 M14 - M36 & 243.8mm Projection

Jacobs Chuck 0066320 BT 50 Rigid Tap Holder 3 M14 - M36 & 243.8mm Projection

  • Wichita, Kansas, United States
  • Jan 30th

People who viewed this item also vieved

PARLEC CAT40 5/8" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11489

PARLEC CAT40 5/8" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11489

  • Dayton, Ohio, United States
  • Mar 3rd
PARLEC CAT40 1-1/4" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11482

PARLEC CAT40 1-1/4" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11482

  • Dayton, Ohio, United States
  • Mar 3rd
Yausa 202 Boring Head

Yausa 202 Boring Head

  • Santa Ana, California, United States
  • Mar 8th
Misc lathe HHS boring bars (6 total)

Misc lathe HHS boring bars (6 total)

  • Gaines, Michigan, United States
  • Mar 8th
SECO TRGOR-16-2 INDEXABLE TOOL HOLDER GOOD CONDITION 1 " SQUARE NEW

SECO TRGOR-16-2 INDEXABLE TOOL HOLDER GOOD CONDITION 1 " SQUARE NEW

  • Toms River, New Jersey, United States
  • Mar 10th
KENNAMETAL MCKNR-164C INDEXABLE TOOL HOLDER VERY GOOD CONDITION 1 " SQUARE

KENNAMETAL MCKNR-164C INDEXABLE TOOL HOLDER VERY GOOD CONDITION 1 " SQUARE

  • Toms River, New Jersey, United States
  • Mar 10th
(2) NMTB 50 SHANK END MILL HOLDERS NMTB50 - 1" & 1-1/2"

(2) NMTB 50 SHANK END MILL HOLDERS NMTB50 - 1" & 1-1/2"

  • Chino, California, United States
  • Mar 11th
Carboloy Seco Hydraulic HSK63A End Mill Holder HC3.60-0750

Carboloy Seco Hydraulic HSK63A End Mill Holder HC3.60-0750

  • Roscoe, Illinois, United States
  • Mar 11th
DODGE 120478 BUSHING, NEW

DODGE 120478 BUSHING, NEW

  • Shreveport, Louisiana, United States
  • Mar 12th
TB WOODS SK11516 - SERIES SK - SKX1 15/16 - SG BUSHING, NEW

TB WOODS SK11516 - SERIES SK - SKX1 15/16 - SG BUSHING, NEW

  • Shreveport, Louisiana, United States
  • Mar 12th
Carboloy/Seco R396.18-00.75-3-17A 828 Max RPM 33420 Tool Holder USED

Carboloy/Seco R396.18-00.75-3-17A 828 Max RPM 33420 Tool Holder USED

  • Knoxville, Tennessee, United States
  • Jun 1st
DEVCON 14300 Dual Bottle Plastic Welder Epoxy Adhesive

DEVCON 14300 Dual Bottle Plastic Welder Epoxy Adhesive

  • Loves Park, Illinois, United States
  • Jun 2nd
Jacobs 7355 Drill Chuck Arbor - Shank: Straight Shank Taper: 1/2'

Jacobs 7355 Drill Chuck Arbor - Shank: Straight Shank Taper: 1/2'

  • Duncan, South Carolina, United States
  • May 31st
JACOBS High Torque & Precision Keyless Chuck W/ Intergrated Shank .039'' - .512

JACOBS High Torque & Precision Keyless Chuck W/ Intergrated Shank .039'' - .512

  • Duncan, South Carolina, United States
  • May 31st
Quick Change Adapter System 400 Inside Taper Size 400 74-077-9 |CB2|RL

Quick Change Adapter System 400 Inside Taper Size 400 74-077-9 |CB2|RL

  • Saint Louis, Missouri, United States
  • May 31st
Aloris CA71 Holder with part off blade

Aloris CA71 Holder with part off blade

  • Mililani, Hawaii, United States
  • May 31st
Sunnen CR2900 Connecting Rod Reconditioning Mandrel: Wedge, Bronze Shoes, Stone

Sunnen CR2900 Connecting Rod Reconditioning Mandrel: Wedge, Bronze Shoes, Stone

  • Scottsdale, Arizona, United States
  • Jun 3rd
Sunnen CR3100 Connecting Rod Reconditioning Mandrel: Wedges, Bronze Shoes, Stone

Sunnen CR3100 Connecting Rod Reconditioning Mandrel: Wedges, Bronze Shoes, Stone

  • Scottsdale, Arizona, United States
  • Jun 3rd
40 TAPER Cartridge Spinde for RAMBAUDI TRACER MILL (SHORT SPINDLE)

40 TAPER Cartridge Spinde for RAMBAUDI TRACER MILL (SHORT SPINDLE)

  • Buffalo, New York, United States
  • Jun 9th
Toolchanger-System for Kress FM 6990E and FM 6901E

Toolchanger-System for Kress FM 6990E and FM 6901E

  • Cheltenham, Ontario, Canada
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies