Introl Design Regenerative Dc Drive 482-1c Two Units For One Price

US $200.00

  • Belpre, Ohio, United States
  • Jun 9th
 You are bidding on 2 INTROL MODEL 482 REGENERATIVE CONTROLLERS. Both were in perfect working condition before being put into dry storage about 12 years ago. Following info provided by Introl web site: The Introl Design Model 482 is microcontroller based and offers the latest in State of the Art Design. The Model 482 has been designed with the emphasis on extremely fast response, for use in closed loop applications. Microprocessor design allows excellent response characteristics while preventing excessive motor peak current. These features make this control a viable low cost alternative, in many applications, to servo amplifiers and motors. This control operates both permanent magnet and shunt wound motors. In addition to closed loop control applications, this control operates exceptionally well in standard variable speed and torque control (tensioning, unwind, re-wind, etc.) modes. In torque control, the Model 482 can be programmed to deenergize the motor when a preset speed is reached. This can be advantageous if a malfunction occurs (e.g. while tensioning a material and the material breaks, the motor will accelerate to the predetermined speed, then coast to a stop. Electronic Reversing Regenerative Braking Fault Indicator LED's Fault Condition Relay Output Programmable Overload Full Wave Field Supply for Shunt Motors      (Field Economy in Stand-by Mode) Run/Stop Relay Type Input Circuitry Motor Disconnect Relay Hard Burst SCR Firing DIP Switch Programmable Operating Modes Full Wave/Four Quadrant Current Limit Indicator Both AC Lines Fused Large Chassis Heatsink Wide Speed Range Programmable Zero Speed Torque Programmable Braking Current CEMF or Tachometer Feedback Velocity/Torque/Closed Loop Control Modes Excellent Speed Regulation Fault Outputs for:      - Loss of Feedback      - Excessive Acceleration or Speed in Torque Mode      - Overload Ratings       Input Power        Reconnectable for 115V or 230V    Horsepower Range 1/8 to 1 HP at 115V    1/4 to 2 HP at 230V    Line Frequency 50 or 60 Hz    Output Voltages: 115V Armature -   90 VDC    Field -  100 VDC                               230V Armature -  180 VDC   Field -  200 VDC    Drive Service Factor 1.0    Duty Continuous    Input Signal Required 0 to ±10 VDC Performance Characteristics       Speed Regulation           CEMF - Voltage Feedback 2% of Set Speed        Tach Feedback 0.5% of Set Speed Operating Conditions       Line Voltage Variation ±10%    Line Frequency Variation ±2 Hz    Ambient Temperature 0 to 55°C    Altitude to 3300' (1000m) above sea level    Required space for TENV Enclosure 1000 cu. in./HP Operator Functions       Power On/Off, Run/Stop,Fwd/Rev Customer Supplied    Speed Potentiometer, 5K, 2W Customer Supplied    Fault Relay Form C, 3A at 28 VDC or 120 VAC Physical Dimensions       Overall 9"H x 5-7/8"W x 3"D    Mounting 6"H x 5-1/2"W All items were tested in working order before being placed in dry storage. All sold as is but guaranteed no DOA. Some of the pumps and motors may have scratches or small dents or surface rust from being transported, stacked and during storage and we try to make them visible in pictures provided. Winning bidder pays Shipping and Handling. Please email with any questions before bidding. We have sold several hundred industrial supplies on eBay in the past years with excellent ratings and have decided to do business on here again just to clean out our stock.  Sales in USA only please. Thanks for looking BID NOW!
Used but looks new and was in working condition when placed into dry storage about 12 years ago.
Brand Introl
Model 482-1C

Directions

Similar products from DC Motor Speed Control Systems

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies