+ Post new Ad
#HRT-210 HAAS 8.27" Vertical/Horizontal CNC Rotary Table (New 1996), US $5,950.00 – Picture 0
#HRT-210 HAAS 8.27" Vertical/Horizontal CNC Rotary Table (New 1996), US $5,950.00 – Picture 0

#hrt-210 Haas 8.27" Vertical/horizontal Cnc Rotary Table (new 1996)

US $5,950.00

  • Hauppauge, New York, United States
  • Mar 7th
Open on mobile:
QR code
Model: HRT-210 HAAS 8.27" Horizontal/Vertical T-Slotted Programmable CNC Rotary Indexer, S/N: 212137 (New 1996) Specifications: Table diamter Torque Runout Backlash Speeds Number of t-slots Center height Brake torque Indexing accuracy Repeatability Resolution Maximum air pressure   8.27" 160 ft. lbs. .0005" 30 arc sec 0.001 to 60 degrees/second 6 at 60 degrees 6" plus or minus 0.001" 200 ft. lbs. plus or minus 15 arc sec 10 arc sec. 0.001 degrees 120 P.S.I. Equipped With: HAAS servo controller with RS 232 up and down ports (S/N: 5102) Pneumatic brake CNC interface to "M" function Variable feed rates 1.5 H.P. DC brush-type servo drive motor Unit is wired for 115 volt AC input. Approximate Weight Including Control: 178 Lbs. Location: F.O.B. Truck, Hauppauge - Long Island, NY - We Ship Worldwide Reference #: XSA_GM3206
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Haas
Model HRT-210

Directions

Similar products from Rotating Tables

Haas HRT310 Rotarty Indexer

Haas HRT310 Rotarty Indexer

  • Manning, South Carolina, United States
  • Mar 9th
Craftsman/Atlas Universal Compound Vise No: 2432 - X Y Table With Vise Clamps

Craftsman/Atlas Universal Compound Vise No: 2432 - X Y Table With Vise Clamps

  • Midland, Michigan, United States
  • Mar 8th
Vintage 8" Cross Slide Rotary Table Craftsman Palmgren Atlas drill Press R#0188

Vintage 8" Cross Slide Rotary Table Craftsman Palmgren Atlas drill Press R#0188

  • Arden, North Carolina, United States
  • Mar 8th
Palmgren 8" XY Rotary Cross-slide table

Palmgren 8" XY Rotary Cross-slide table

  • Scotts Valley, California, United States
  • Mar 8th
KEARNEY & TRECKER DIVIDING HEAD / ROTARY TABLE 16" HEAVY DUTY

KEARNEY & TRECKER DIVIDING HEAD / ROTARY TABLE 16" HEAVY DUTY

  • Rockford, Illinois, United States
  • Mar 8th
Troyke 18" horizontal rotary table

Troyke 18" horizontal rotary table

  • Elk Grove, California, United States
  • Mar 8th
Rotab 48

Rotab 48

  • Deltaville, Virginia, United States
  • Mar 8th
HAAS HRT-210 Brushed Rotary Table

HAAS HRT-210 Brushed Rotary Table

  • Rochester, Indiana, United States
  • Mar 7th
CAMCO 1305RDM24H48-270 INDEX DRIVE CAMCO FERGUSON RDM INDEXER

CAMCO 1305RDM24H48-270 INDEX DRIVE CAMCO FERGUSON RDM INDEXER

  • Tullahoma, Tennessee, United States
  • Mar 7th
TSUDAKOMA RNCM 301R 4th Axis Rotary Table 12.5in Dia CNC Machining Center Mill

TSUDAKOMA RNCM 301R 4th Axis Rotary Table 12.5in Dia CNC Machining Center Mill

  • Essington, Pennsylvania, United States
  • Mar 7th
8 INCH HORIZONTAL/VERTICAL ROTARY TABLE MADE IN TAIWAN (3900-2328)

8 INCH HORIZONTAL/VERTICAL ROTARY TABLE MADE IN TAIWAN (3900-2328)

  • Chino, California, United States
  • Mar 7th
HAAS AUTOMATION DUAL SPINDLE SERVO 5C INDEXER FOR VF1 VF2 VF3 VF4 ETC..

HAAS AUTOMATION DUAL SPINDLE SERVO 5C INDEXER FOR VF1 VF2 VF3 VF4 ETC..

  • Fountain Valley, California, United States
  • Mar 7th
HAAS HRT-210-2 4th Axis Dual Rotary Indexing Table

HAAS HRT-210-2 4th Axis Dual Rotary Indexing Table

  • Oxnard, California, United States
  • Mar 6th
30" x 30" DEVLIEG AIR LIFT T-SLOTTED INDEX TABLE WITH CABLES INDEXING

30" x 30" DEVLIEG AIR LIFT T-SLOTTED INDEX TABLE WITH CABLES INDEXING

  • Grand Rapids, Michigan, United States
  • Mar 6th
Matsuura Tool Setter CAT40 and CAT35 Dual Taper Unit

Matsuura Tool Setter CAT40 and CAT35 Dual Taper Unit

  • Belchertown, Massachusetts, United States
  • Mar 6th
HAAS BRUSHLESS DUAL TWO AXIS CONTROL BOX 4TH 5TH ROTARY TABLE INDEXER CNC SC01M

HAAS BRUSHLESS DUAL TWO AXIS CONTROL BOX 4TH 5TH ROTARY TABLE INDEXER CNC SC01M

  • Santa Clarita, California, United States
  • Mar 6th
meca 12" Rotary table with indexer

meca 12" Rotary table with indexer

  • San Diego, California, United States
  • Mar 6th
UNIDYNAMICS 12" 4th AXIS CNC ROTARY TABLE WITH TAILSTOCK AND BASE

UNIDYNAMICS 12" 4th AXIS CNC ROTARY TABLE WITH TAILSTOCK AND BASE

  • La Puente, California, United States
  • Mar 6th
Yuasa 4th axis cnc rotary table, 10.75" 3 jaw chuck, 19 pin connector, 3.5" bore

Yuasa 4th axis cnc rotary table, 10.75" 3 jaw chuck, 19 pin connector, 3.5" bore

  • Saint Charles, Missouri, United States
  • Mar 6th
FADAL 5 AXIS ROTARY TABLE

FADAL 5 AXIS ROTARY TABLE

  • Batavia, Ohio, United States
  • Mar 5th

People who viewed this item also vieved

5C EMERGENCY COLLETS & FIXTURE MOUNT

5C EMERGENCY COLLETS & FIXTURE MOUNT

  • Franklinville, New York, United States
  • Mar 5th
R8 Collet 7/8" 3/4" 1/2" 3/8" 1/4" 5/32 * Lot OF 6 Collets

R8 Collet 7/8" 3/4" 1/2" 3/8" 1/4" 5/32 * Lot OF 6 Collets

  • Seekonk, Massachusetts, United States
  • Mar 5th
5c Collet Set

5c Collet Set

  • Arlington Heights, Illinois, United States
  • Mar 5th
5 INCH SINE BAR / PLATE machinist tools 1 x 5 -5/8 inches x 1" High Hardened

5 INCH SINE BAR / PLATE machinist tools 1 x 5 -5/8 inches x 1" High Hardened

  • Simpsonville, South Carolina, United States
  • Mar 6th
Midaco front load manual pallet system M3020FLR\3P\3PS

Midaco front load manual pallet system M3020FLR\3P\3PS

  • Englewood, Colorado, United States
  • Mar 6th
USED Skinner 4-Piece T-Slot Face Plate Jaw Set

USED Skinner 4-Piece T-Slot Face Plate Jaw Set

  • Holland, Ohio, United States
  • Mar 6th
Precisoin M16 BT40 ER20 75L collet chuck toolholder cnc milling lathe tools new

Precisoin M16 BT40 ER20 75L collet chuck toolholder cnc milling lathe tools new

  • Dongguan, China
  • Mar 10th
3/4 INCH SQUARE HEAD STANDARD LATHE CHUCK WRENCH (3900-4873)

3/4 INCH SQUARE HEAD STANDARD LATHE CHUCK WRENCH (3900-4873)

  • Chino, California, United States
  • Mar 10th
Suburban Vaccume Chuck VC 612 S2

Suburban Vaccume Chuck VC 612 S2

  • Cheshire, Massachusetts, United States
  • Mar 10th
New Single Split Shaft Collar 1 1/4" Bore X 2" OD Black Oxide Finish

New Single Split Shaft Collar 1 1/4" Bore X 2" OD Black Oxide Finish

  • Toms River, New Jersey, United States
  • Mar 10th
New Single Split Shaft Collar 1 1/4" Bore X 2 1/8" OD Black Oxide Finish

New Single Split Shaft Collar 1 1/4" Bore X 2 1/8" OD Black Oxide Finish

  • Toms River, New Jersey, United States
  • Mar 10th
New Single Split Shaft Collar 1 1/4" Bore X 1 5/8" OD Black Oxide Finish

New Single Split Shaft Collar 1 1/4" Bore X 1 5/8" OD Black Oxide Finish

  • Toms River, New Jersey, United States
  • Mar 10th
Palmgren milling vise 6" machinist tool vice

Palmgren milling vise 6" machinist tool vice

  • Floral, Arkansas, United States
  • Mar 10th
NICE! 5'' QUICK-ACTION SLIDE DRILL PRESS VISE - #V-125

NICE! 5'' QUICK-ACTION SLIDE DRILL PRESS VISE - #V-125

  • Covina, California, United States
  • Mar 10th
VINTAGE PALMGREN 8" ROTARY CROSS SLIDE TABLE VISE - EXCELLENT WORKING CONDITION

VINTAGE PALMGREN 8" ROTARY CROSS SLIDE TABLE VISE - EXCELLENT WORKING CONDITION

  • Hemet, California, United States
  • Mar 10th
CENTER LINE GAGE SETS (USE WITH 10" & 12" CALIPERS) **NEW** DS

CENTER LINE GAGE SETS (USE WITH 10" & 12" CALIPERS) **NEW** DS

  • Mentor, Ohio, United States
  • May 12th
BISON Super Precision Live Center, 2MT - 7-565-102

BISON Super Precision Live Center, 2MT - 7-565-102

  • Douglassville, Pennsylvania, United States
  • May 12th
Royal Products 10665 5 MT Quad-Bearing Live Center With CNC Point USED

Royal Products 10665 5 MT Quad-Bearing Live Center With CNC Point USED

  • Poplar Bluff, Missouri, United States
  • May 12th
Enerpac Automatic Stop and Hold Station IC-4

Enerpac Automatic Stop and Hold Station IC-4

  • Chicago, Illinois, United States
  • May 26th
Enerpac Work Support Cylinder WS - 3500 G NEW

Enerpac Work Support Cylinder WS - 3500 G NEW

  • Chicago, Illinois, United States
  • May 26th
Enerpac Work Support Cylinder WS - 1001 NEW

Enerpac Work Support Cylinder WS - 1001 NEW

  • Chicago, Illinois, United States
  • May 26th
Norton 7" Max. Wheel Dia. Phonopoint Diamond Dresser

Norton 7" Max. Wheel Dia. Phonopoint Diamond Dresser

  • Boston, Massachusetts, United States
  • May 31st
(2) PARALLEL BARS SET, RAILS, STEEL MACHINIST TOOLS/BLOCKS, WEIGHTS, WORKHOLDING

(2) PARALLEL BARS SET, RAILS, STEEL MACHINIST TOOLS/BLOCKS, WEIGHTS, WORKHOLDING

  • Albuquerque, New Mexico, United States
  • May 31st
UNKNOWN BRAND PRECISION STANDARD ANGLE PLATE, 5 3/4" X 5 3/4" X 10"

UNKNOWN BRAND PRECISION STANDARD ANGLE PLATE, 5 3/4" X 5 3/4" X 10"

  • Coffeyville, Kansas, United States
  • May 31st
Universal collet extensions 90528 91659

Universal collet extensions 90528 91659

  • Arlington, Washington, United States
  • Jun 5th
JW Winco A40634 Black Finish Steel Adjustable Pin-Type Face Spanner for Round -

JW Winco A40634 Black Finish Steel Adjustable Pin-Type Face Spanner for Round -

  • US, United States
  • Jun 5th
INGERSOLL CAT50ER50X4.000 4540066 50ER50X4.000 V FLANGE ER COLLET CHUCK NEW

INGERSOLL CAT50ER50X4.000 4540066 50ER50X4.000 V FLANGE ER COLLET CHUCK NEW

  • Clover, South Carolina, United States
  • Jun 5th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies