Hobart Mg1532 Grinder

US $7,200.00

  • Lansing, Michigan, United States
  • Jan 31st
SPECIFICATIONS DETAILS AND DIMENSIONS GENERAL: The MG1532 has a 7.5 H.P. grind motor, 1H.P.mix motor and an 8-foot length cord and plug power connection. Casters, air-drive foot switch, drain pan and splash shield are standard. Available voltages are 208/60/3 and 240/60/3. ELECTRICAL CONTROLS: Electrical controls consist of front mounted water resistant switches, magnetic contactors, dual motor overload protection and foot switch operation capability. An electrical interlock switch is provided. Whenever the hopper lid is opened, power to the motors is shut off. The hopper lid must be in its proper operating position before the motors can be started. CAPACITY: The MG1532 Mixer-Grinder hopper has meat capacity up to 150 pounds depending on the type of product. The grinding rate is 55 to 60 pounds of fresh boneless beef per minute, first or second cutting through a 1/8" plate; 60 to 65 pounds of pork per minute second cutting through a 3/16" plate. The MG1532 is for fresh or frozen meat tempered to 24 deg. F. or higher and can be in flake or stick form. GRINDING END: The mixer-grinder is equipped with a ?Wedge cylinder? grinding end. This grinding end is sized for #32 knives and plates (not included but optionally available). FEEDING SYSTEM: The MG1532 is powered by two separate drive systems. A 1 H.P. motor drives the heavy-duty steel mixing arm. The arm rotates at 23 rpm and can easily be removed from the hopper for cleaning. The conveyor screw extends the full length of the hopper and cylinder. The screw rotates at a speed of 216 rpm. By depressing the MIX/GRIND START button both the mixing arm and the screw are operated. Both mixing and grinding are stopped when the STOP switch is depressed. CLEANING: The mixing arm, conveyor screw, cylinder, and conveyor screw drive-shaft seal and mix arm seal are removable from the mixer-grinder for cleaning. SPECIAL EQUIPMENT: When the MG1532 is used with a side feed as a second cut machine, a grinding end adjusting ring is required to attach to Hobart grinders, and special adapters are required to attach to other makes. When ordering a side-feed adapter for non-Hobart grinders, specify knife and plate size. When ordering an adjusting ring for a Hobart grinder, specify grinder model number. FINISH: The mixer-grinder consists of glass bead finished stainless steel hopper, stainless steel panels to enclose the base assembly and motors. The mixing arm, end ring, cylinder, and conveyor screw are tinned. The casters are stainless steel and nickel-chrome plated. SPECIFICATIONS DETAILS AND DIMENSIONS GENERAL: The MG1532 has a 7.5 H.P. grind motor, 1H.P.mix motor and an 8-foot length cord and plug power connection. Casters, air-drive foot switch, drain pan and splash shield are standard. Available voltages are 208/60/3 and 240/60/3. ELECTRICAL CONTROLS: Electrical controls consist of front mounted water resistant switches, magnetic contactors, dual motor overload protection and foot switch operation capability. An electrical interlock switch is provided. Whenever the hopper lid is opened, power to the motors is shut off. The hopper lid must be in its proper operating position before the motors can be started. CAPACITY: The MG1532 Mixer-Grinder hopper has meat capacity up to 150 pounds depending on the type of product. The grinding rate is 55 to 60 pounds of fresh boneless beef per minute, first or second cutting through a 1/8" plate; 60 to 65 pounds of pork per minute second cutting through a 3/16" plate. The MG1532 is for fresh or frozen meat tempered to 24 deg. F. or higher and can be in flake or stick form. GRINDING END: The mixer-grinder is equipped with a ?Wedge cylinder? grinding end. This grinding end is sized for #32 knives and plates (not included but optionally available). FEEDING SYSTEM: The MG1532 is powered by two separate drive systems. A 1 H.P. motor drives the heavy-duty steel mixing arm. The arm rotates at 23 rpm and can easily be removed from the hopper for cleaning. The conveyor screw extends the full length of the hopper and cylinder. The screw rotates at a speed of 216 rpm. By depressing the MIX/GRIND START button both the mixing arm and the screw are operated. Both mixing and grinding are stopped when the STOP switch is depressed. CLEANING: The mixing arm, conveyor screw, cylinder, and conveyor screw drive-shaft seal and mix arm seal are removable from the mixer-grinder for cleaning. SPECIAL EQUIPMENT: When the MG1532 is used with a side feed as a second cut machine, a grinding end adjusting ring is required to attach to Hobart grinders, and special adapters are required to attach to other makes. When ordering a side-feed adapter for non-Hobart grinders, specify knife and plate size. When ordering an adjusting ring for a Hobart grinder, specify grinder model number. FINISH: The mixer-grinder consists of glass bead finished stainless steel hopper, stainless steel panels to enclose the base assembly and motors. The mixing arm, end ring, cylinder, and conveyor screw are tinned. The casters are stainless steel and nickel-chrome plated. Thank you for shopping at D.L. Walker, INC. If you are looking for something and you are not finding it please call me at 517.374.7484 and ask for Sales. We have a wide variety of commercial food equipment we offer used, scratch and dent, and refurbished equipment. New inventory is constantly coming in. we guarantee all of our equipment to be in working condition when it arrives to you. We test and run all of our equipment before it leaves our door, unless sold as is. We recommend you insure your shipments… I get great shipping discounts and extend them to my costumers. However, I DO NOT include insurance in any of my shipments, if interested in insuring your shipment; please contact me for a quote. I am not responsible for any damage done during transportation… however we do our best to pallet, wrap, tie down, strap, and if necessary crate equipment at no cost to you. We reserve the right to end any listing at any time. All equipment listed is also for sale at our shop in Lansing, MI. However, I do my best to monitor internet interest and in house sales to avoid conflict. There is no restocking fee on any merchandise that is returned in one week and in the same condition. Buyers are responsible for shipping. Thanks again for taking interest in D.L. Walker, INC. We look forward to doing business with you.
Condition:
Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...
Brand HOBART
Model MG1532

Directions

Similar products from Meat Mincing Machines

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies