Hikari Industrial Premium Innovative Lockstitch Sewing Machine

US $1,499.00

  • Budapest, default, Hungary
  • Feb 16th
H9180N-7C-5/AK Premium Innovative Lockstitch Machine     The HIKARI innovative single needle lockstitch machine is optimized for the European requirements: small and middle sized orders, hard to sew fabrics, and high quality production.   The H9180N offers unique technological flexibility, that means only one machine can sew hard to sew, light-, medium- and heavy weight materials in the production:   * Thread can be used in the range of Nm 150 to Nm 20 * Needles can be used in the range of Nm 55 to Nm 140 * Stitch length can be set up to 7 mm without structural modification     HIKARI’S PATENTED CLIP DEVICE TO AVOID BIRDNEST AND THREADING  Instead of the conventional type of thread wiper HIKARI redesigned the clip device, which does not leave thread tail during backstitch, and the threading can be avoided completely. Besides this, it is possible to use it during sewing with special coarse presser foots like compensating- and zipper foots (In case if the operators wants to use the above mentioned presser foots, they have to switch of the conventional wiper, because it can not work with coarser presser foots.)  With the clip device the operator can use the backstitching all the time, threading does not needed neither and this means 5- 8% of efficiency increase.     MICRO LIFT FUNCTION TO LIFT THE PRESSER FOOT FROM THE NEEDLE PLATE   Easy to adjust, micro lift function to lift the presser foot from 0,1 to 6 mm to the needle plate. These properties together, with the stitch length, and the flexible trim gives a unique machine for the production.   ADVANCED PARALELL FEED SYSTEM  Advanced parallel feed system, which provides close to rectangular like feed dog actuation, This device gives higher flexibility to adjust the machine for hard to sew materials.   THE HIKARI DIRECT DRIVE MOTOR WITH BUILT-IN CONTROL BOX WILL NEVER OVERHEAT DUE TO EXTREME THERMAL CONDITIONS, BECAUSE OF THE BUILT - IN TURBINE COOLER     H9180N-7C has a turbine installed behind the 550W motor in the machine which has the biggest torque in the market. The turbine is working together with the motor, and the stream generated and circulated by the turbine, cools the complete cabinet, and the built in electronic devices as well, to prevent the overheat of the electronics. HIKARI manufactures direct drive systems since 2006, so they have the greatest experience in this field.   BUILT - IN THE HEAD LED LIGHT FOR MORE PRECISE WORK AND BETTER ERGONOMY   The LED light is built together with the reverse switch. It is integrated to the machine head for better clearance of the movements of the operator. The LED unit is equipped with 14 LEDs, and it is adjustable in 5 levels to work easier with reflective materials.   BUILT - IN THE HEAD CONTROL BOX WITH INTERNAL TURBINE COOLER   The state of the development and the commitment of HIKARI can be seen here: currently on the world the HIKARI H9180N, the H8800D and the JUKI DDL8700A machines has built-in the head control box. In the next years the other manufacturers will follow us, because this construction offers less malfunction and lower maintenance time and cost for the users.  PRODUCTIVITY GROWTH  The direct drive sewing machines does not have transmission loss like the clutch motor machines. (The belt-drive sewing machine with servo motor has the same transmission loss as well. The increase of the production is about 14,6%. The belt-drive sewing machine sews 1000 meters. Under the same circumstances, the direct-drive sewing machine sews 1146 meters- in every shift. With one investment, from the beginning, the direct drive motor equipped sewing machines produces extra profit!   REDUCED NEED FOR MAINTANANCE  The direct drive motors does not require any maintenance. In Europe it’s one of the major priorities, because savings on the operation and the maintenance costs gives higher extra profit, or free sources to distribute on the market.   REDUCED ENERGY CONSUMPTION   Compared to the clutch motors the direct-drive sewing machines saves up to 66 - 71,5% on electricity bills in every shift depending on the application.   REDUCED NOISE LEVEL   The main purpose is to improve the working conditions of the operators, to obtain a win-win situation.  If the sewing machine “loads” less on the operator, they are more relaxed in the last 2-3 working hours, so the productivity’s will not decrease as much as with a louder machine, and the produced waste will be less as well. The machines will be delivered unassembled, in it's original unopened box.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand HIKARI
Class Industrial
Model H9180N-7C-5/AK
Country/Region of Manufacture China
Type Sewing

Directions

Similar products from Sewing Machines & Tools

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies